Toluene diisocyanate

From Wikipedia, the free encyclopedia - View original article

Toluene-2,4-diisocyanate
Toluene diisocyanate
Toluene diisocyanate
Identifiers
CAS number584-84-9 YesY
ChemSpider13835351 YesY
ChEBICHEBI:53556 YesY
ChEMBLCHEMBL1086446 YesY
RTECS numberCZ6300000
Jmol-3D imagesImage 1
Properties
Molecular formulaC9H6N2O2
Molar mass174.2 g/mol
AppearanceColorless to pale yellow, liquid
Density1.214 g/cm3, liquid
Melting point21.8 °C (295.0 K)
Boiling point251 °C (524 K)
Solubility in waterReacts
Hazards
MSDSExternal MSDS
EU classificationVery toxic (T+)
Carc. Cat. 3
R-phrasesR26, R36/37/38, R40,
R42/43, R52/53
S-phrases(S1/2), S23, S36/37, S45, S61
NFPA 704
Flash point127 °C (261 °F; 400 K)
Related compounds
Related isocyanatesMethylene diphenyl diisocyanate
Naphthalene diisocyanate
Related compoundsPolyurethane
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral dataUV, IR, NMR, MS
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 YesY (verify) (what is: YesY/N?)
Infobox references
 
Jump to: navigation, search
Toluene-2,4-diisocyanate
Toluene diisocyanate
Toluene diisocyanate
Identifiers
CAS number584-84-9 YesY
ChemSpider13835351 YesY
ChEBICHEBI:53556 YesY
ChEMBLCHEMBL1086446 YesY
RTECS numberCZ6300000
Jmol-3D imagesImage 1
Properties
Molecular formulaC9H6N2O2
Molar mass174.2 g/mol
AppearanceColorless to pale yellow, liquid
Density1.214 g/cm3, liquid
Melting point21.8 °C (295.0 K)
Boiling point251 °C (524 K)
Solubility in waterReacts
Hazards
MSDSExternal MSDS
EU classificationVery toxic (T+)
Carc. Cat. 3
R-phrasesR26, R36/37/38, R40,
R42/43, R52/53
S-phrases(S1/2), S23, S36/37, S45, S61
NFPA 704
Flash point127 °C (261 °F; 400 K)
Related compounds
Related isocyanatesMethylene diphenyl diisocyanate
Naphthalene diisocyanate
Related compoundsPolyurethane
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral dataUV, IR, NMR, MS
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 YesY (verify) (what is: YesY/N?)
Infobox references

Toluene diisocyanate (TDI) is an organic compound with the formula CH3C6H3(NCO)2. Two of the six possible isomers are commercially important: 2,4-TDI (CAS: 584-84-9) and 2,6-TDI (CAS: 91-08-7). 2,4-TDI is produced in the pure state, but TDI is often marketed as 80/20 and 65/35 mixtures of the 2,4 and 2,6 isomers respectively. It is produced on a large scale, accounting for 34.1% of the global isocyanate market in 2000, second only to MDI.[1] Approximately 1.4 billion kilograms were produced in 2000.[2]

Synthesis[edit]

2,4-TDI is prepared in three steps from toluene, which is doubly nitrated with nitric acid to give dinitrotoluene. This step determines the isomer ratio of the ultimate TDI. Hydrogenation of the dinitrotoluene produces the corresponding isomers of diaminotoluene (TDA). Finally, the TDA is subjected to phosgenation, i.e. treatment with phosgene to form TDI. This final step produces HCl as a byproduct and is a major source of industrial hydrochloric acid.[2]

Distillation of the crude TDI mixture produces an 80:20 mixture of 2,4-TDI and 2,6-TDI, known as TDI (80/20). Differentiation or separation of the TDI (80/20) can be used to produce pure 2,4-TDI and a 65:35 mixture of 2,4-TDI and 2,6-TDI, known as TDI (65/35).

Applications[edit]

The isocyanate functional groups in TDI react with hydroxyl groups to form carbamate (urethane) links. The two isocyanate groups in TDI react at different rates: The 4-position is approximately four times more reactive than the 2-position. 2,6-TDI is a symmetrical molecule and thus has two isocyanate groups of similar reactivity, similar to the 2-position on 2,4-TDI. However, since both isocyanate groups are attached to the same aromatic ring, reaction of one isocyanate group will cause a change in the reactivity of the second isocyanate group.[1]

Hazards[edit]

The LD50 for TDI is 5800 mg/kg for oral contact and LC50 of 610 mg/m3 for the vapour. Despite the indicated low toxicity, TDI is classified as “very toxic” by the European Community.[2]

In the United States, the Occupational Safety and Health Administration has set a permissible exposure limit with a ceiling at 0.02 ppm (0.14 mg/m3), while the National Institute for Occupational Safety and Health has not established a recommended exposure limit, due to the classification of toluene diisocyanate as a possible occupational carcinogen.[3]

Information is available on handling, personal protective equipment, exposure monitoring, transport, storage, sampling and analysis of TDI, dealing with accidents, and health and environmental themes.[4] All major producers of TDI are members of the International Isocyanate Institute, whose aim is the promotion of the safe handling of TDI in the workplace, community, and environment.

See also[edit]

References[edit]

  1. ^ a b Randall, D.; Lee, S. (2003). The Polyurethanes Book. New York: Wiley. ISBN 978-0-470-85041-1. 
  2. ^ a b c Six, C.; Richter, F. (2005), "Isocyanates, Organic", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a14_611 
  3. ^ National Institute for Occupational Safety and Health (May 1994). "Documentation for Immediately Dangerous To Life or Health Concentrations (IDLHs)". Centers for Disease Control and Prevention. 
  4. ^ Allport, D. C.; Gilbert, D. S.; Outterside, S. M., ed. (2003). MDI and TDI: Safety, Health and the Environment: A Source Book and Practical Guide. Wiley. ISBN 978-0-471-95812-3. 

External links[edit]