From Wikipedia, the free encyclopedia - View original article
|This article needs additional citations for verification. (January 2008)|
Sugar beet, cultivated Beta vulgaris, is a plant whose root contains a high concentration of sucrose. It is grown commercially for sugar production. Sugar beets and other B. vulgaris cultivars, such as beetroot and chard, share a common wild ancestor, the sea beet (Beta vulgaris maritima).
In 2011 France, the United States, Germany, Russia and Ukraine were the world's five largest sugar beet producers by metric ton; by value, Turkey takes the place of Ukraine. However, in 2010-2011, North America, Western Europe and Eastern Europe did not produce enough sugar from sugar beets, and were all net importers of sugar. The US harvested 1,004,600 acres (4,065 km²) of sugarbeets in 2008. In 2009 sugar beets accounted for 20% of the world's sugar production.
The sugar beet has a conical, white, fleshy root (a taproot) with a flat crown. The plant consists of the root and a rosette of leaves. Sugar is formed through a process of photosynthesis in the leaves, and it is then stored in the root.
The root of the beet contains 75% water, about 20% sugar and 5% pulp  (the exact sugar contents can vary between 12 and 21% of sugar, depending on the cultivar and growing conditions). Sugar is the primary value of sugar beet as a cash crop. The pulp, insoluble in water and mainly composed of cellulose, hemicellulose, lignin, and pectin, is used in animal feed. The byproducts of the sugar beet crop, such as pulp and molasses, add another 10% to the value of the harvest.
Sugar beets grow exclusively in the temperate zone, in contrast to sugarcane, which grows exclusively in the tropical and subtropical zones. The average weight of sugar beet ranges between 0.5 to 1 kilogram (1.1 to 2.2 lb). Sugar beet foliage has a rich, brilliant green color and grows to a height of about 35 centimetres (14 in). The leaves are numerous and broad and grow in a tuft from the crown of the beet, which is usually level with or just above the ground surface.
In the 16th century, Olivier de Serres discovered the value of sugar beets for preparing sugar syrup. In his notes, he wrote: "The beet-root, when being boiled, yields a juice similar to syrup of sugar, which is beautiful to look at on account of its vermilion color."
The methodical use of sugar beets for the extraction of sugar dates to 1747, when Andreas Sigismund Marggraf, professor of physics in the Academy of Science of Berlin, discovered the existence of a sugar in beets similar in its properties to that obtained from sugarcane. The discovery was little used at first, however, and the manufacture of sugar from beets did not attain commercial importance for over half a century. Marggraf's student and successor Franz Karl Achard began selectively breeding sugar beet from the 'White Silesian' fodder beet in 1784. By the beginning of the 19th century, his beet was approximately 5–6% sucrose by (dry) weight, compared to around 20% in modern varieties. Under the patronage of Frederick William III of Prussia, he opened the world's first beet sugar factory in 1801, at Cunern in Silesia.
The work of Achard soon attracted the attention of Napoleon Bonaparte, who appointed a commission of scientists to go to Silesia to investigate Achard's factory. Upon their return, two small factories were constructed near Paris. Although these factories were not altogether a success, the results attained greatly interested Napoleon, and in 1811, he issued a decree appropriating one million francs for the establishment of sugar schools, and compelling the farmers to plant a large acreage to sugar beets the following year. He also prohibited the further importation of sugar from the Caribbean effective in 1813.
The beet sugar industry in Europe rapidly developed after the Napoleonic Wars. By 1812, Frenchman Jean-Baptiste Quéruel, working for the industrialist Benjamin Delessert, devised a process of sugar extraction suitable for industrial application. By 1837, France was the largest sugar beet producer in the world, a position it continued to hold in the world in 2010. By 1837, there were 542 factories in France, producing 35,000 tonnes of sugar. By 1880, Germany became the largest sugar beet to sugar producer in the world.
Successful sugar beet and associated sugar production started in the United States in about 1890. The states of California, Utah, and Nebraska were early pioneers of sugar beet industry. Arthur Stayner (d. 1899) is regarded as the "father and founder of the movement that made the manufacture of sugar in Utah a success".:2, column 5
Sugar beets were not grown on a large scale in the United Kingdom until the mid-1920s, when 17 processing factories were built, following war-time shortages of imported cane sugar. One factory had, however, been built by the Dutch at Cantley in Norfolk in 1912. Sugar beet seed from France was listed in the annual catalogues of Gartons Agricultural Plant Breeders from that firm's inception in 1898 until the first of their own varieties was introduced in 1909.
The sugar beet, like sugarcane, needs a peculiar soil and a unique climate for its successful cultivation. The most important requirement is the soil must contain a large supply of plant food, be rich in humus, and have the property of retaining a great deal of moisture. A certain amount of alkali is not necessarily detrimental, as sugar beets are not especially susceptible to injury by some alkali. The ground should be fairly level and well-drained, especially where irrigation is practiced.
While the physical character is of secondary importance, as generous crops are grown in sandy soil as well as in heavy loams, still the ideal soil is a sandy loam, i.e., a mixture of organic matter, clay and sand. A subsoil of gravel, or the presence of hard-pan, is not desirable, as cultivation to a depth of from 12 to 15 inches is necessary to produce the best results.
Climatic conditions, temperature, sunshine, rainfall and winds have an important bearing upon the success of sugar beet agriculture. A temperature ranging from 15 to 21°C (60-70°F) during the growing months is most favorable. In the absence of adequate irrigation, 460 mm (16 inches) of rainfall are necessary to raise an average crop. High winds are harmful, as they generally crust the land and prevent the young beets from coming through the ground. The best results are obtained along the coast of southern California, where warm, sunny days succeeded by cool, foggy nights seem to meet sugar beet's favored growth conditions. Sunshine of long duration but not of great intensity is the most important factor in the successful cultivation of sugar beets. Near the equator, the shorter days and the greater heat of the sun sharply reduce the sugar content in the beet.
In high elevation regions such as those of Colorado and Utah, where the temperature is high during the daytime, but where the nights are cool, the quality of the sugar beet is excellent. In Michigan, the long summer days and the influence of the Great Lakes result in satisfactory climatic conditions for sugar beet culture. Sebewaing, Michigan lies in the Thumb region of Michigan; both the region and state are major sugar beet producers. Sebewaing is home to one of three Michigan Sugar Company factories. The town sponsors an annual Michigan Sugar Festival.
To cultivate beets successfully, the land must be properly prepared. Deep ploughing is the first principle of beet culture. It allows the roots to penetrate the subsoil without much obstruction, thereby preventing the beet from growing out of the ground, besides enabling it to extract considerable nourishment and moisture from the lower soil. If the latter is too hard, the roots will not penetrate it readily and, as a result, the plant will be pushed up and out of the earth during the process of growth. A hard subsoil is impervious to water and prevents proper drainage. It should not be too loose, however, as this allows the water to pass through more freely than is desirable. Ideally, the soil should be deep, fairly fine and easily penetrable by the roots. It should also be capable of retaining moisture and at the same time admit of a free circulation of air and good drainage. Sugar beet crops exhaust the soil rapidly. Crop rotation is recommended and necessary. Normally, beets are grown in the same ground every third year, peas, beans or grain being raised the other two years.
In most temperate climates, beets are planted in the spring and harvested in the autumn. At the northern end of its range, growing seasons as short as 100 days can produce commercially viable sugar beet crops. In warmer climates, such as in California's Imperial Valley, sugar beets are a winter crop, planted in the autumn and harvested in the spring. In recent years, Syngenta has developed the so-called tropical sugar beet. It allows the plant to grow in tropical and subtropical regions. Beets are planted from a small seed; 1 kg of beet seed comprises 100,000 seeds and will plant over a hectare of ground (1 lb will plant about an acre).
Until the latter half of the 20th century, sugar beet production was highly labor-intensive, as weed control was managed by densely planting the crop, which then had to be manually thinned two or three times with a hoe during the growing season. Harvesting also required many workers. Although the roots could be lifted by a plough-like device which could be pulled by a horse team, the rest of the preparation was by hand. One laborer grabbed the beets by their leaves, knocked them together to shake free loose soil, and then laid them in a row, root to one side, greens to the other. A second worker equipped with a beet hook (a short-handled tool between a billhook and a sickle) followed behind, and would lift the beet and swiftly chop the crown and leaves from the root with a single action. Working this way, he would leave a row of beets that could be forked into the back of a cart.
Today, mechanical sowing, herbicide application for weed control, and mechanical harvesting have displaced this reliance on manual farm work. A root beater uses a series of blades to chop the leaf and crown (which is high in nonsugar impurities) from the root. The beet harvester lifts the root, and removes excess soil from the root in a single pass over the field. A modern harvester is typically able to cover six rows at the same time. The beets are dumped into trucks as the harvester rolls down the field, and then delivered to the factory. The conveyor then removes more soil.
If the beets are to be left for later delivery, they are formed into clamps. Straw bales are used to shield the beets from the weather. Provided the clamp is well built with the right amount of ventilation, the beets do not significantly deteriorate. Beets that freeze and then defrost produce complex carbohydrates that cause severe production problems in the factory. In the UK, loads may be hand examined at the factory gate before being accepted.
In the US, the fall harvest begins with the first hard frost, which arrests photosynthesis and the further growth of the root. Depending on the local climate, it may be carried out over the course of a few weeks or be prolonged throughout the winter months. The harvest and processing of the beet is referred to as "the campaign", reflecting the organization required to deliver the crop at a steady rate to processing factories that run 24 hours a day for the duration of the harvest and processing (for the UK, the campaign lasts about five months). In the Netherlands, this period is known as de bietencampagne, a time to be careful when driving on local roads in the area while the beets are being grown, because the naturally high clay content of the soil tends to cause slippery roads when soil falls from the trailers during transport.
UN Food & Agriculture Organisation (FAO)
The world harvested 271.6 million metric tonnes of sugar beets in 2011. The world's largest producer was Russia, with a 47.6 million-metric-tonne harvest. The average yield of sugar beet crops worldwide was 58.2 tonnes per hectare.
Imperial Valley (California) farmers have achieved yields of about 160 tonnes per hectare and over 26 tonnes sugar per hectare. Imperial Valley farms benefit from high intensities of incident sunlight and intensive use of irrigation and fertilizers.
|This section needs additional citations for verification. (February 2012)|
After they are harvested, beets are typically transported to a factory. In the UK, beets are transported by a hauler, or by a tractor and a trailer by local farmers. Railways and boats are no longer used. Some beets were carried by rail in the Republic of Ireland, until the shutdown of sugar beet production in 2006 after the end of the government subsidies.
Each load is weighed and sampled before it gets tipped onto the reception area, typically a "flat pad" of concrete, where it is moved into large heaps. The beet sample is checked for
From these elements, the actual sugar content of the load is calculated and the grower's payment determined.
The beet is moved from the heaps into a central channel or gulley, where it is washed towards the processing plant.
After reception at the processing plant, the beet roots are washed, mechanically sliced into thin strips called cossettes, and passed to a machine called a diffuser to extract the sugar content into a water solution.
Diffusers are long vessels of many metres in which the beet slices go in one direction while hot water goes in the opposite direction. The movement may either be caused by a rotating screw or the whole rotating unit, and the water and cossettes move through internal chambers. The three common designs of diffuser are the horizontal rotating 'RT' (Raffinerie Tirlemontoise, manufacturer), inclined screw 'DDS' (De Danske Sukkerfabrikker), or vertical screw "Tower". Modern tower extraction plants have a processing capacity of up to 17,000 metric tons per day. A less-common design uses a moving belt of cossettes, with water pumped onto the top of the belt and poured through. In all cases, the flow rates of cossettes and water are in the ratio one to two. Typically, cossettes take about 90 minutes to pass through the diffuser, the water only 45 minutes. These countercurrent exchange methods extract more sugar from the cossettes using less water than if they merely sat in a hot water tank. The liquid exiting the diffuser is called raw juice. The colour of raw juice varies from black to a dark red depending on the amount of oxidation, which is itself dependent on diffuser design.
The used cossettes, or pulp, exit the diffuser at about 95% moisture, but low sucrose content. Using screw presses, the wet pulp is then pressed down to 75% moisture. This recovers additional sucrose in the liquid pressed out of the pulp, and reduces the energy needed to dry the pulp. The pressed pulp is dried and sold as animal feed, while the liquid pressed out of the pulp is combined with the raw juice, or more often introduced into the diffuser at the appropriate point in the countercurrent process. The final byproduct, vinasse, is used as fertilizer or growth substrate for yeast cultures.
During diffusion, a portion of the sucrose breaks down into invert sugars. These can undergo further breakdown into acids. These breakdown products are not only losses of sucrose, but also have knock-on effects reducing the final output of processed sugar from the factory. To limit (thermophilic) bacterial action, the feed water may be dosed with formaldehyde and control of the feed water pH is also practiced. Attempts at operating diffusion under alkaline conditions have been made, but the process has proven problematic. The improved sucrose extraction in the diffuser is offset by processing problems in the next stages.
Carbonatation is a procedure which removes impurities from raw juice before it undergoes crystallization. First, the juice is mixed with hot milk of lime (a suspension of calcium hydroxide in water). This treatment precipitates a number of impurities, including multivalent anions such as sulfate, phosphate, citrate and oxalate, which precipitate as their calcium salts and large organic molecules such as proteins, saponins and pectins, which aggregate in the presence of multivalent cations. In addition, the alkaline conditions convert the simple sugars, glucose and fructose, along with the amino acid glutamine, to chemically stable carboxylic acids. Left untreated, these sugars and amines would eventually frustrate crystallization of the sucrose.
Next, carbon dioxide is bubbled through the alkaline sugar solution, precipitating the lime as calcium carbonate (chalk). The chalk particles entrap some impurities and absorb others. A recycling process builds up the size of chalk particles and a natural flocculation occurs where the heavy particles settle out in tanks (clarifiers). A final addition of more carbon dioxide precipitates more calcium from solution; this is filtered off, leaving a cleaner, golden light-brown sugar solution called thin juice.
Before entering the next stage, the thin juice may receive soda ash to modify the pH and sulphitation with a sulfur-based compound to reduce colour formation due to decomposition of monosaccharides under heat.
The thin juice is concentrated via multiple-effect evaporation to make a thick juice, roughly 60% sucrose by weight and similar in appearance to pancake syrup. Thick juice can be stored in tanks for later processing, reducing the load on the crystallization plant.
Thick juice is fed to the crystallizers. Recycled sugar is dissolved into it, and the resulting syrup is called mother liquor. The liquor is concentrated further by boiling under a vacuum in large vessels (the so-called vacuum pans) and seeded with fine sugar crystals. These crystals grow as sugar from the mother liquor forms around them. The resulting sugar crystal and syrup mix is called a massecuite, from "cooked mass" in French. The massecuite is passed to a centrifuge, where the High Green syrup is removed from the massecuite by centrifugal force. After a predetermined time, water is then sprayed into the centrifuge via a spray bar to wash the sugar crystals which produces Low Green syrup. The centrifuge then spins at very high speed to partially dry the crystals the machine then slows down and a plough shaped arm is deployed which ploughs out the sugar from the sides of the centrifuge from the top to the bottom onto conveying plant underneath where it is transported into a rotating granulator where it is dried using warm air.
The high green syrup is fed to a raw sugar vacuum pan from which a second batch of sugar is produced. This sugar ("raw") is of lower quality with more colour and impurities, and is the main source of the sugar dissolved again into the mother liquor. The syrup from the raw (Low green syrup) is boiled for a long time in AP Pans and sent to slowly flow around a series of about eight crystallisers. From this, a very low-quality sugar crystal is produced (known in some systems as "AP sugar") that is also redissolved. The syrup separated is molasses, which still contains sugar, but contains too much impurity to undergo further processing economically. The molasses is stored on site and is added to dried beet pulp to make animal feed some is also sold in bulk tankers.
Actual procedures may vary from the above description, with different recycling and crystallisation processes.
|This section needs additional citations for verification. (February 2012)|
In a number of countries, notably the Czech Republic and Slovakia, beet sugar is used to make a rum-flavored hard liquor known as Tuzemak. On the Åland Islands, a similar drink is made under the brand name Kobba Libre. In some European countries, especially in the Czech Republic and Germany, beet sugar is also used to make rectified spirit and vodka.
An unrefined sugary syrup can be produced directly from sugar beet. This thick, dark syrup is produced by cooking shredded sugar beet for several hours, then pressing the resulting mash and concentrating the juice produced until it has the consistency similar to that of honey. No other ingredients are used. In Germany, particularly the Rhineland area, this sugar beet syrup (called Zuckerrüben-Sirup or Zapp in German) is used as a spread for sandwiches, as well as for sweetening sauces, cakes and desserts.
Commercially, if the syrup has a dextrose equivalency (DE) above 30, the product has to be hydrolyzed and converted to a high-fructose syrup, much like high-fructose corn syrup, or isoglucose syrup in the EU.
Many road authorities in North America now use desugared beet molasses as de-icing or anti-icing products in winter control operations. The molasses can be used directly, combined with liquid chlorides and applied to road surfaces, or used to treat the salt spread on roads. Molasses can be more advantageous than road salt alone because it reduces corrosion and lowers the freezing point of the salt-brine mix, so the de-icers remain effective at lower temperatures. The addition of the liquid to rock salt has the additional benefits that it reduces the bounce and scatter of the rock salt, keeping it where it is needed, and reduces the activation time of the salt to begin the melting process.
The feedstock-to-yield ratio for sugarbeet is 56:9. Therefore, it takes 6.22 kg of sugar beet to produce 1 kg of ethanol (approximately 1.27 l at room temperature).
Sugar beets are an important part of a crop rotation cycle.
Sugar beet plants are susceptible to Rhizomania ("root madness"), which turns the bulbous tap root into many small roots, making the crop economically unprocessable. Strict controls are enforced in European countries to prevent the spread, but it is already endemic in some areas. It is also susceptible to the beet leaf curl virus, which causes crinkling and stunting of the leaves.
Continual research looks for varieties with resistance, as well as increased sugar yield. Sugar beet breeding research in the United States is most prominently conducted at various USDA Agricultural Research Stations, including one in Fort Collins, Colorado, headed by Linda Hanson and Leonard Panella; one in Fargo, North Dakota, headed by John Wieland; and one at Michigan State University in East Lansing, Michigan, headed by J. Mitchell McGrath.
Other economically important members of the Chenopodioideae subfamily:
In the United States, genetically modified sugar beets, engineered for resistance to glyphosate, a herbicide marketed as Roundup, was developed by Monsanto as a genetically modified crop. Glyphosate-resistant sugar beets contain a biosynthetic gene that protects it from the effects of glyphosate when it is applied to the crop as a means to control weeds. In 2005, the US Department of Agriculture-Animal and Plant Health Inspection Service (USDA-APHIS) deregulated glyphosate-resistant sugar beets after it conducted an environmental assessment and determined glyphosate-resistant sugar beets were highly unlikely to become a plant pest. Sugar from glyphosate-resistant sugar beets has been approved for human and animal consumption in multiple countries, but commercial production of biotech beets has been approved only in the United States and Canada. Studies have concluded the sugar from glyphosate-resistant sugar beets has the same nutritional value as sugar from conventional sugar beets (not genetically modified or non-GMO).
Glyphosate-resistant sugar beets play an important role in the United States' sugar industry. The United States imports 30% of its sugar from other countries, while the remaining 70% is extracted from domestically grown sugar beets and sugarcane. Of the domestically grown sugar crops, over half of the extracted sugar is derived from sugar beets, and the rest from sugarcane. After deregulation in 2005, glyphosate-resistant sugar beets were extensively adopted in the United States. About 95% of sugar beet acres in the US were planted with glyphosate-resistant seed in 2011.
The ability to effectively and efficiently control weeds in glyphosate-resistant sugar beets is one of the many reasons why the glyphosate-resistant sugar beet has been widely adopted in the United States. Elimination of weeds is important in sugar beet fields because they compete with the crop for water, nutrients and light. Weeds may be chemically controlled using glyphosate without harming the crop. After planting sugar beet seed, weeds emerge in fields and growers apply glyphosate to control them. Glyphosate is commonly used in field crops because it controls a broad spectrum of weed species and has a low toxicity.
Prior to glyphosate, growers used other herbicides to control weeds in conventional sugar beet fields. While these chemicals are still available in small quantities, they are not as effective as glyphosate and require stricter application procedures. They also tend to injure the sugar beet crop.
Since herbicide options are limited in conventional sugar beet fields, growers rely on different methods to control their weeds. One method to reduce weed populations is mechanical control, which uses tillage equipment to move soil and disturb weeds. Tillage equipment is necessary in both glyphosate-resistant and conventional sugar beet fields, but it is used more frequently in conventional systems. This may be problematic because greater use of tillage equipment directly correlates to higher input production costs, as more fuel is required to run the equipment.
In addition to greater use of tillage equipment in conventional sugar beet fields, hand labor is another useful approach to control weeds. Each year, thousands of migrant workers travel around the United States to work in agricultural fields, including sugar beet fields. The widespread adoption of glyphosate-resistant sugar beet, however, has decreased the demand for migrant workers. Unlike conventional sugar beets, weed control is greater in glyphosate-resistant sugar beet fields and migrant workers are no longer needed.
According to Monsanto, "Weeds that emerge prior to or with sugarbeets cause the most yield losses" because these weeds "can compete with the crop for nutrients, soil moisture, and light, therefore reducing yield and sugar content" and glyphosate-resistance sugar beets allow the use of glyphosate to kill those weeds without harming the sugar beet. One study from the UK supports that contention, while another from the North Dakota State University extension service found lower yields.
Many weeds in the United States and worldwide are resistant to glyphosate. Resistance develops when growers use the same herbicide, or mode of action, every year to control their weeds. Applying different herbicide modes of action reduces the risk of resistance.
The introduction of glyphosate-resistant sugar beets may contribute to the growing number of glyphosate-resistant weeds because sugar beets may be rotated with other glyphosate-resistant crops, such as soybeans. If using all glyphosate-resistant crops, growers may control their weeds every year solely using glyphosate - a weed-control strategy that is not recommended because it increases the likelihood of resistance.
Monsanto has developed a program to encourage growers to use different herbicide modes of action to control their weeds in all cropping systems. Growers receive financial support when purchasing multiple herbicides.
On January 23, 2008, the Center for Food Safety, the Sierra Club, and the Organic Seed Alliance and High Mowing Seeds filed a lawsuit against USDA-APHIS regarding their decision to deregulate glyphosate-resistant sugar beets in 2005. The organizations expressed concerns regarding glyphosate-resistant sugar beets' ability to potentially cross-pollinate with conventional sugar beets.
On September 21, 2009, U.S. District Judge Jeffrey S. White, US District Court for the Northern District of California, ruled that USDA-APHIS had violated federal law in deregulating glyphosate-resistant sugar beets without adequately evaluating the environmental and socioeconomic impacts of allowing commercial production. The USDA estimated a sugar shortage would cost consumers $2.972 billion in 2011.
On August 13, 2010, Judge White revoked the deregulation of glyphosate-resistant sugar beets and declared it unlawful for growers to plant glyphosate-resistant sugar beets in the spring of 2011. As a result of this ruling, growers were permitted to harvest and process their crop at the end of the 2010 growing season, yet a ban on new plantings was enacted. After the ruling, glyphosate-resistant sugar beets could not be planted until USDA-APHIS filed an environmental impact statement (EIS), the purpose of which is to determine if environmental issues have negative effects on humans and the environment, and it may take two to three years to complete the study. After the EIS is completed, USDA-APHIS may petition to deregulate glyphosate-resistant sugar beets.
After Judge White's ruling, USDA-APHIS prepared an environmental assessment seeking partial deregulation of glyphosate-resistant sugar beets. The assessment was filed based on a request received from Monsanto and KWS SSAT AG, a German seed company. Both companies, as well as the sugar beet industry employees and growers, believed a sugar shortage would occur if glyphosate-resistant sugar beets could not be planted. As a response to this concern, USDA-APHIS developed three options in the environmental assessment to address the concerns of environmentalists, as well as those raised by the industry. The first option was to not plant glyphosate-resistant sugar beets until the EIS was completed. The second option was to allow growers to plant glyphosate-resistant sugar beets if they obtained a USDA-APHIS permit and followed specific mandates. Under the third and final option, glyphosate-resistant sugar beets would be partially deregulated, but monitored by Monsanto and KWS SSAT AG. USDA-APHIS preferred the second option. They placed the environmental assessment in the Federal Register on November 4, 2010, and received public comment for 30 days. In November 2010, in response to a suit by the original parties, Judge White ordered the destruction of plantings of genetically modified sugar beets developed by Monsanto after ruling previously that the USDA had illegally approved the biotech crop. In February 2011, a federal appeals court for the Northern district of California in San Francisco overturned the ruling, concluding, "The Plaintiffs have failed to show a likelihood of irreparable injury. Biology, geography, field experience, and permit restrictions make irreparable injury unlikely."
On February 4, 2011, the USDA-APHIS announced glyphosate-resistant sugar beets had been partially deregulated and growers would be allowed to plant seed from spring 2011 until an EIS is completed. USDA-APHIS developed requirements that growers must follow if handling glyphosate-resistant sugar beets and will monitor growers throughout the partial deregulation period. The requirements are classified into categories which include planting glyphosate-resistant sugar beets for seed production, planting for sugar production, and transporting sugar beets across state lines. Failure to follow the requirements set by USDA-APHIS may result in civil or criminal charges and destruction of the crop. In July 2012, after completing an environmental impact assessment and a plant pest risk assessment the USDA deregulated Monsanto's Roundup Ready sugar beets.
|Wikimedia Commons has media related to Beta vulgaris.|
|Look up sugar beet in Wiktionary, the free dictionary.|