From Wikipedia, the free encyclopedia - View original article
A sapper, also called pioneer or combat engineer, is a combatant or soldier who performs a variety of military engineering duties such as bridge-building, laying or clearing minefields, demolitions, field defences and general construction, as well as road and airfield construction and repair. They are also trained to serve as infantry personnel in defensive and offensive operations. A sapper's duties are devoted to tasks involving facilitating movement, defence and survival of allied forces and impeding those of enemies.
The term "sapper" is used in the British Army and Commonwealth nations, Polish Army and the U.S. military. The phrase "sapper" come from the French "saper", to dig or to trench.
A sapper, in the sense first used by the French military, was one who excavated trenches under defensive musket or artillery fire to advance a besieging army's position in relation to the works of an attacked fortification, which was referred to as sapping the enemy fortifications.
Saps were excavated by brigades of trained sappers or instructed troops. When an army was defending a fortress with cannon, they had an obvious height and therefore range advantage over the attacker's guns. The attacking army's artillery had to be brought forward, under fire, so as to facilitate effective counter-battery fire.
This was achieved by digging what the French termed a sappe (derived from the archaic French word for spade). Using techniques developed and perfected by Vauban, the sappers began the trench at such an angle so as to avoid enemy fire enfilading the sappe. As they pressed forward, a position was prepared from which cannon could suppress the defenders on the bastions. The sappers would then change the course of their trench, zig-zagging toward the fortress wall.
Each leg brought the attacker's artillery closer until the besieged cannon would be sufficiently suppressed for the attackers to breach the walls. Broadly speaking, sappers were originally experts at demolishing or otherwise overcoming or bypassing fortification systems.
An additional term applied to sappers of the British Indian Army was 'miner'. The native engineer corps were referred to as 'sappers and miners', as for example, the Royal Bombay Sappers and Miners. The term arose from a task done by sappers to further the battle after saps were dug. The saps permitted cannon to be brought into firing range of the besieged fort and its cannon, but often the cannon themselves were unable to breach the fort walls. The engineers would dig a tunnel from the forward-most sap up to and under the fort wall, then place a charge of gunpowder and ignite it, causing a tremendous explosion which would destroy the wall and permit attacking infantry to close with the enemy. This was dangerous work, often lethal to the sappers, and was vehemently resisted by the besieged enemy. Since the two tasks went hand in hand and were done by the same troops, native Indian engineer corps came to be called 'sappers and miners'.
Sapper (abbreviated Spr) is the Royal Engineers' equivalent of Private. This is also the case within the Indian Army Corps of Engineers, Canadian Military Engineers, Royal Australian Engineers, South African Army Engineer Formation and Royal New Zealand Engineers. The term Sapper was introduced in 1856 when the Corps of Royal Sappers and Miners was amalgamated with the officer Corps of Royal Engineers to form the Corps of Royal Engineers.
During the Sinai and Palestine Campaign of World War I Australian Sappers repaired a bridge at the historic crossing of the Jordan River at Jisr Benat Yakub (also known as Jacob's Ford). Here the retreating Ottoman and German rearguard had blown up the bridge's central arch which was repaired in five hours by Sappers attached to the Australian Mounted Division. While the light horse brigades forded the river, continuing the Desert Mounted Corps' advance to Damascus, the Sappers worked through the night of 27/28 September 1918, to repair the bridge to enable the division's wheeled vehicles and guns to follow on 28 September.
In the Canadian Forces, Sappers exist both in the regular force and reserve force. The rank of Sapper is used instead of Private Trained to signify completion of the Engineer DP1 course. Canadian Sappers have been deployed in many major conflicts in recent history including World War I, World War II, the Korean War, and the War in Afghanistan. The roles of a Sapper entail: Bridge building with the ACROW or Bailey bridging systems; explosive ordnance disposal; Advanced Reverse-Osmosis Water Purification Unit, used mainly in domestic operations; Maintaining roadways and airfields; Combat diving; Tactical breaching, and; Erecting and tearing down friendly living spaces. Ultimately, the objective of the Sappers is to facilitate the living, moving, and fighting for friendly troops on the battlefield, and denying the same to enemy forces. The motto of the Canadian Military Engineers is Ubique, meaning 'Everywhere,'a motto shared with the Royal Canadian Artillery. The patron saint of Combat Engineers is Saint Barbara, and 4 December is the corps' day of celebration.
The term 'Sappers', in addition to the connotation of rank of engineer private, is used collectively to informally refer to the Engineer Corps as a whole and also forms part of the informal names of the three combat engineer groups, viz. Madras Sappers, Bengal Sappers and the Bombay Sappers. Each of these groups consist of about twenty battalion-sized engineer regiments and additional company-sized minor engineer units. The three Sapper groups are descended from the Sapper and Miner groups of the East India Company and later the British Indian Army of the British Raj.
In the Israel Defense Forces a sapper (in Hebrew: פלס, palas) is the military profession of a combat soldier who went through basic combat engineering training. Most of the sappers are soldiers of the Combat Engineering Corps, but there are also infantry sappers, who are part of the infantry brigades and are organized in Engineering companies called פלחה"ן (Palchahan). These companies are integral part of the infantry brigades. Combat engineering corps sappers are arranged in battalions.
Each sapper goes through high level infantry training, which qualifies him as Rifleman 07 (רובאי 07). Combat engineering sappers are qualified as Sapper 06 (פלס 06). They are skilled in infantry combat, basic sabotage, landmine planting and demining, use of explosives, breaching and opening routes, trench warfare, and operating the IDF Puma combat engineering vehicle (CEV). Combat engineering commanders are qualified as Sapper 08 while combat engineering officers are qualified as Sapper 11. Both go through additional advance training to gain the skills needed for high level sapper profession.
The Israel Police also maintains a bomb disposal specialist unit. All police sappers must graduate a 10-month training program at the bomb disposal training center in Beit Shemesh, which includes operational exercises, theoretical studies, and fieldwork.
In France, civil firefighters and the military firefighters of the Paris Fire Brigade and other town or country brigades are called "sappers-firemen" (sapeurs-pompiers, SP): the first fire company created by Napoléon I was a military sapper company. Apart from this, the sappers are the combat engineers.
Sappers were very common in the French army and in other European armies during the Napoleonic era but progressively disappeared in the 19th century, except in the French Foreign Legion, which retains a sapper unit.
In the French Army, since the 18th century, every grenadier battalion had a small unit of sappers. They had the mission to advance, under the enemy's fire, in order to destroy with their axes the obstacles drawn by the enemy and to clear the way for the rest of the infantry. The danger of such missions and their short life expectancies, allowed them certain privileges, such as the authorization to wear beards. In addition to their beards and axes, they traditionally wear leather aprons and gloves.
The current pioneer unit of the Legion reintroduced the symbols of the Napoleonic sappers: the beard, the axe, the leather apron, the crossed-axes insignia and the leather gloves. If the parades of the Legion are opened by this unit, it is to commemorate the traditional role of the sappers "opening the way" for the troops.
In the Hellenic Army, there is the "Mechanic" or "Corps of Engineers" (Michaniko-Μηχανικό).
In Portugal, the term "sapper" is used both in the military and in the civilian environment.
In the Portuguese Army, a sapador de engenharia (engineering sapper) is a soldier of the engineer branch that has specialized combat engineer training. A sapador de infantaria (infantry sapper) is a soldier of the infantry branch that has a similar training and that usually serves in the combat support sapper platoon of an infantry battalion. A sapador NBQ (NBC sapper) is an engineer branch soldier specialized in nuclear, biological and chemical warfare.
The bombeiros-sapadores (sappers-firefighters) are the civil municipal professional firefighters, that exist in the main cities of the Country. The largest unit of this type is the Regimento de Bombeiros Sapadores (Sappers-Firefighters Regiment) maintained by the Lisbon Municipal Council.
The sapadores florestais (forest sappers) are the professionals maintained by the Government, local authorities and large private forestry companies, whose function is to clean and maintain forests and to prevent and fight forest fires.
In the U.S. Army, sappers are combat engineers who support the front-line infantry, and they have fought in every war in American history. For example, after the Battle of Yorktown, General Washington cited Louis Lebègue Duportail, the Chief of Engineers, for conduct which afforded "brilliant proofs of his military genius."
Designation as a sapper nowadays is earned as an additional proficiency. The U.S. Army authorizes four skill tabs for permanent wear above the unit patch on the left shoulder (Army Regulation 670-1 Chapter 29-13, Sub-Paragraph f). Along with the Sapper Tab, the Special Forces Tab, the Ranger Tab, and the President's Hundred Tab identify soldiers who have passed a demanding course of military instruction and demonstrated their competence in particular specialities and skills.
To wear the Sapper Tab, a soldier must graduate from the Sapper Leader Course (SLC) which is operated by the U.S. Army Engineer School at Fort Leonard Wood, Missouri. The Sapper Leader Course is a 28-day course designed to train joint-service leaders in small unit tactics, leadership skills, and tactics required to perform as part of a combined arms team. The course is open to enlisted soldiers in the grades of E-4 (P) (in the Army, specialist on the list for promotion to sergeant) E-5, and above, cadets, and officers O-3 (Army, captain) and below. Students can come from any combat or combat support branch of the service, but priority is given to engineering, cavalry, and infantry soldiers.
PAVN (People's Army of Vietnam) and Viet Cong sappers, as they were called by US forces, are better described as commando units. The Vietnamese term đặc công can be literally translated as "special task". Thousands of specially trained elite fighters served in the PAVN and Viet Cong commando–sapper units which were organized as independent formations. While not always successful due to lack of appropriate personal weapon types for combat and assault like other special forces, at times they inflicted heavy damage against their enemies. They have been armed with various types of bombs, mines, explosive charges, grenades and even steel-pellet mines which were much more devastating than the U.S. M18 Claymore and are still the main weapons of the Dac cong.
These elite units served as raiders against American/ARVN troops, and infiltrated spearheads during the final Ho Chi Minh Campaign in 1975 – where they seized key road and bridge assets, destroyed installations, attacked command and control nodes located deep inside enemy territory, planted explosives on U.S. water craft, and otherwise helped the PAVN's rapid mobile forces advance. A typical PAVN/VC Dac cong organization is shown in the diagram. The raiding force was usually grouped into assault teams, each broken down into several 3–5 man assault cells. Overall, there were generally 4 operational echelons.
|This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (June 2013)|