From Wikipedia, the free encyclopedia - View original article
|It has been suggested that Dorsum (anatomy) be merged into this article. (Discuss) Proposed since October 2014.|
|This article is one of a series on|
|Anatomical terms of motion|
|Anatomical terms of location|
|Anatomical terms of muscle|
|Anatomical terms of bone|
|Anatomical terms of neuroanatomy|
Standard anatomical terms of location deal unambiguously with the anatomy of animals, including humans. Furthermore, the terms are not language-specific, so with little or no translation, they can be understood by all zoologists.
While these terms are standardized within specific fields of biology, there are unavoidable, sometimes dramatic, differences between some disciplines. For example, differences in terminology remain a problem that, to some extent, still separates the terminology of human anatomy from that used in the study of various other zoological categories.
Standardized anatomical and zoological terms of location have been developed, usually based on Latin and Greek words, to enable all biological and medical scientists to precisely delineate and communicate information about animal bodies and their component organs, even though the meaning of some of the terms often is context-sensitive.
The vertebrates and Craniata share a substantial heritage and common structure, so many of the same terms are used to describe location. To avoid ambiguities this terminology is based on the anatomy of each animal in a standard way.
For humans, one type of vertebrate, anatomical terms may differ from other forms of vertebrates. For one reason, this is because humans have a different neuraxis and, unlike animals that rest on four limbs, humans are considered when describing anatomy as being in the standard anatomical position. Thus what is on "top" of a human is the head, whereas the "top" of a dog may be its back, and the "top" of a first could refer to either its left or its right side.
For invertebrates, standard application of locational terminology often becomes difficult or debatable at best when the differences in morphology are so radical that common concepts are not homologous and do not refer to common concepts. For example, many species are not even bilaterally symmetrical. In these species, terminology depends on their type of symmetry (if any).
Because animals can change orientation with respect to their environment, and because appendages like limbs and tentacles, can change position with respect to the main body, positional descriptive terms need to refer to the animal as in its standard anatomical position. All descriptions are with respect to the organism in its standard anatomical position, even when the organism in question has appendages in another position. This helps avoid confusion in terminology when referring to the same organism in different postures.
In humans, this refers to the body in a standing position with arms at the side and palms facing forward (thumbs out). While the universal vertebrate terminology used in veterinary medicine would work in human medicine, the human terms are thought to be too well established to be worth changing.
Many anatomical terms can be combined, either to indicate a position in two axes simultaneously or to indicate the direction of a movement relative to the body. For example, "anterolateral" indicates a position that is both anterior and lateral to the body axis (such as the bulk of the pectoralis major muscle). In radiology, an X-ray image may be said to be "anteroposterior", indicating that the beam of X-rays pass from their source to patient's anterior body wall through the body to exit through posterior body wall.
There is no definite limit to the contexts in which terms may be modified to qualify each other in such combinations. Generally the modifier term is truncated and an "o" is added in prefixing it to the qualified term. For example a view of an animal from an aspect dorsal and lateral might be called "dorsolateral". Where desirable three or more terms may be agglutinated or concatenated, as in "anteriodorsolateral". Such terms sometimes used to be hyphenated, but the modern tendency is to omit the hyphen. There is however little basis for any strict rule to interfere with choice of convenience in such use.
Three basic reference planes are used to describe location.
|Axis||Directional term||Directed towards|
|Anteroposterior (rostrocaudal1,craniocaudal1, cephalocaudal2)||Anterior||Head end|
|Dorsoventral||Dorsal||Back, spinal column|
|Left-right (dextro-sinister2, sinistro-dexter2)||Left (sinister)||Left-hand side|
|Right (dexter)||Right-hand side|
|Lateral||Left and right|
|Proximal/distal||Proximal||Point at which appendage joins the body|
|Distal||Extremity of appendage|
(1) Fairly common usage.
(2) Uncommon usage.
(3) Equivalent to one-half of the left-right axis.
(The terms "intermediate", "ipsilateral", "contralateral", "superficial", and "deep", while indicating directions, are relative terms and thus do not properly define fixed anatomical axes. Also, while the "rostrocaudal" and anteroposterior directionality are equivalent in a significant portion of the human body, they are different directions in other parts of the body.)
To begin with, distinct, polar-opposite ends of the organism are chosen. By definition, each pair of opposite points defines an axis. In a bilaterally symmetrical organism, there are 6 polar opposite points, giving three axes that intersect at right angles—the x, y, and z axes familiar from three-dimensional geometry.
As humans are bilaterally symmetrical organisms, anatomical descriptions usually use the same terms as those for vertebrates and other members of the taxonomic group Bilateria. However, for historical and other reasons, standard human directional terminology has several differences from that used for other bilaterally symmetrical organisms.
As with other vertebrates, two of the most obvious extremes are the "top" and the "bottom" of the organism. In standard anatomical position in humans, these correspond to the head and feet. The head end of the body is referred to as the superior end (Latin superior: "above"), while the feet are inferior end (Latin inferior: "below"). an axis formed joining the two is the superior-inferior axis.
As with other vertebrate terminology, there are synonymous terms for superior and inferior (Table 3). The terms cranial and cephalic are often used. Both "cranial" and "cephalic" are both used to refer to the skull, with "cranial" being used more commonly. The term "rostral" is rarely used in human anatomy, apart from embryology, and refers more to the front of the face than the superior aspect of the organism. This term is more applicable in organisms with longer heads, such as equids. Similarly, the term caudal is occasionally used in human anatomy, and the cranio-caudal axis is occasionally encountered. Generally, this use would be used with respect to only the head and the main body (trunk), and not when considering the limbs. In the limbs of most animals, the terms cranial and caudal are used in the regions proximal to the carpus (the wrist, in the forelimb) and the tarsus (the ankle in the hindlimb). Objects and surfaces closer to or facing toward the head are cranial; those facing away or farther from the head are caudal.
As with vertebrate directional terms, superior and inferior can be used in a relative sense in humans, but can not be uniformly applied to other organisms with varying normal anatomical positions. For example, the shoulders are superior to the navel, but inferior to the eyes in humans.
In humans, anterior refers to the "front" of the individual, and is synonymous with ventral, other than in the head. Similarly, posterior, refers to the "back" of the subject, and is synonymous with dorsal, other than in the head.  When referring to the body as a whole the terms "dorsal" and "ventral" are used infrequently in human anatomy. However, they are applied commonly in referring to limb position. The anteroposterior axis is preferred use for describing the axis connecting the front and the back in humans.
Lateral refers to the sides, as in 'left lateral' and 'right lateral'. Medial refers to the middle.  Left and right lateral are used in the same sense as they are in other vertebrates, referring to the individual's left and right.  The left-right axis is rarely used in medicine; instead, the mediolateral axis is used almost exclusively.
As in other vertebrates, the terms proximal and distal are used to describe parts of a feature that are respectively close to or distant from the main mass of the body, or some other point of reference. The point of reference varies, but is normally the point of attachment to the main body for limbs and appendages, and a point considered to represent the origin for other features. For example the side of a tooth furthest from the center of the mouth is its distal side. However, other terms are used for direction in the appendages, given the unique position of the limbs (in standard anatomical position) in humans. For example, the segments of the digestive system closest to the mouth are termed proximal, as opposed to those closest to the anus, which are termed distal.
Specialized terms are used to describe location on appendages, parts that have a point of attachment to the main trunk of the body. Structures that are close to the point of attachment of the body are "proximal"or "central", while ones more distant from the attachment point are "distal"or "peripheral". For example, the hands are at the distal end of the arms, while the shoulders are at the proximal ends; the proximal end of the urethra is attached to the bladder.
Volar (sometimes used as a synonym for "palmar") refers to the underside, for both the palm and the sole (plantar), as in volar pads on the underside of hands, fingers, feet and toes.
The terms valgus and varus are used to refer to angulation of the distal part of a limb at a joint. For example, at the elbow joint, in the anatomical position, the forearm and the upper arm do not lie in a straight line, but the forearm is angulated laterally with respect to the upper arm by about 5–10°. The forearm is said to be "in valgus". Angulation at a joint may be normal (as in the elbow) or abnormal.
Commonly when, for example, one anatomical feature is nearer the caudal end than another, one may use an expression such as "nearer the caudal end" or "caudal to". However, an unambiguous and concise convention is to use the Latin suffix -ad, meaning "towards", or sometimes "to".  So for example, "distad" means "in the distal direction", and "distad of the femur" means "beyond the femur in the distal direction". The suffix may be used very widely, as in the following examples: anteriad (towards the anterior), apicad (towards the apex), basad (towards the basal end), caudad, centrad, cephalad (towards the cephalic end), craniad, dextrad, dextrocaudad, dextrocephalad, distad, dorsad, ectad (towards the ectal, or exterior, direction), entad (towards the interior), laterad, mediad, mesad, neurad, orad, posteriad, proximad, rostrad, sinistrad, sinistrocaudad, sinistrocephalad, ventrad.
A number of other anatomical landmarks are also used to describe the location of organs.
Structures may be described as being at the level of a specific spinal vertebrae, depending on the section of the vertebral column the structure is at. The position is often abbreviated. For example, a structures at the level of the fourth cervical vertebrae may be abbreviated as "C4", at the level of a thoracic vertebrate "T4", at the level of a lumbar vertebrate "L3". Because the sacrum is fused, it is not often used to provide location.
References may also take origin from superficial anatomy, made to landmarks that are on the skin or visible underneath. For example, structures may be described relative to the anterior superior iliac spine, the medial malleolus or the medial epicondyle.
Anatomical "lines", theoretical lines drawn through structures, are also used to describe anatomical location.
Fields such as osteology, palaeontology and dentistry apply special terms of location to describe the mouth and teeth. This is because although teeth may be aligned with their main axes within the jaw, some different relationships require special terminology as well; for example teeth also can be rotated, and in such contexts terms like "anterior" or "lateral" become ambiguous.
The terms oral "of the mouth" and aboral "away from the mouth" are also used.
In standard anatomical position, the palms of the hands face anteriorly. To avoid confusion, several unique terms are used.
For improved clarity, the directional term palmar (Latin: palma; palm of the hand) is usually used for the anterior of the hand, and dorsal is used to describe the back of the hand. Thus, by connecting the extremes, dorsopalmar axis is formed. Most commonly, "dorsopalmar" is used when describing the hand, although it is sometimes applied to the arm as a whole (see Fig. 12). For the third axis, the mediolateral axis suffices, although if referring to the limb alone, "medial" may refer to the centre of the arm itself. This replaces "anterior" and "posterior", which can also be used - "anterior" can be used to describe the palm of the hand, and "posterior" can be used to describe the back of the hand and arm.
In the forearm, for clarity, the sides are named after the bones. Structures closer to the radius are radial, structures closer to the ulna are ulnar, and structures relating to both bones are referred to as radioulnar. Similarly, in the lower leg, structures near the tibia (shinbone) are tibial and structures near the fibula are fibular (or peroneal).
Most terms of anatomical location are relative to linear motion (translation) along the X- Y- and Z-axes, but there are other degrees of freedom as well, in particular, rotation around any of those three axes.
Anteversion and retroversion are complementary anatomical terms of location, describing the degree to which an anatomical structure is rotated forwards (towards the front of the body) or backwards (towards the back of the body) respectively, relative to some datum position. The terms also describe the positioning of surgical implants, such as in arthroplasty.
All vertebrates (including humans) have the same basic body plan - they are bilaterally symmetrical. That is, they have mirror-image left and right halves if divided down the centre. For these reasons, the basic directional terms can be considered to be those used in vertebrates. By extension, the same terms are used for many other (invertebrate) organisms as well.
The most obvious end-points are the "nose" and "tail" (see Fig. 2). Anatomically, the nose is referred to as the anterior end (Latin: ante; before). The polar opposite to the anterior end is the posterior end (Latin: post; after).
By drawing a line connecting these two points, we define the anteroposterior axis. Caudal and Posterior (back end) are often used interchangeably. For brevity, the term anteroposterior is often abbreviated to read AP axis. As well as defining the anteroposterior axis, the terms "anterior" and "posterior" also define relative positions along the axis. Thus, in the fish in Fig. 2, the gill openings are posterior relative to the eyes, but anterior to the tail.
Distal to the carpal joint, the term dorsal replaces cranial and palmar replaces caudal. Similarly, distal to the tarsal joint the term dorsal replaces cranial and plantar replaces caudal. For example, the top of a dog's paw is its dorsal surface; the underside, either the palmar (on the forelimb) or the plantar (on the hindlimb) surface.
In organisms like vertebrates, that have distinct heads, the anterior end is sometimes referred to as the rostral end (Latin: rostrum; beak), the cranial end (Greek κρανίον (kranion); skull), or the cephalic end (Greek: κεφάλι (kephalē); head). Another term for posterior is caudal (Latin: cauda; tail), though in humans this refers to the feet i.e. inferior rather than posterior)—a term that strictly applies only to vertebrates, and therefore less preferred, except in veterinary medicine where these terms are standard, as accepted for example in the Nomina Anatomica Veterinaria. In veterinary medicine, caudo-cranial is preferred between head and tail, and rostro-caudal between nose and neck. Less-used synonyms would be rostrocaudal or cephalocaudal axes (see Table 1). For example, in the horse, for example, the eyes are caudal to the nose, and rostral to the back of the head.
In humans, the directions "rostral" and "caudal" often become confused with anterior and posterior, or superior and inferior. The difference between the two is most easily visualized when looking at the head, as can be seen in the image to the right. From the most caudal of positions in the nervous system (of a person) to a nearby, rostral area, it is equally accurate to say the area in question is rostral as to say it is superior. However, in the frontal lobes of the telencephalon, to say an area is rostral to a nearby area is equivalent to saying it is anterior. Those two lines lie on planes perpendicular to one another. This occurs, as becomes clear in the diagram, due to the intuitive yet curious curving "C" shape of rostrocaudal directionality when discussing the human brain.
These two terms refer to front/belly (ventral) and back (dorsal) or an organism.
By connecting the outermost points the dorsoventral axis is formed. This is commonly abbreviated to DV axis. The DV axis, is perpendicular the AP axis at all times. The terms "dorsal" and "ventral" are also used to describe relative positions. Thus, the pectoral fins are dorsal to the anal fin, but ventral to the dorsal fin.
The last axis, by geometric definition, must be at right angles to both the AP and the DV axes. The left side and right side of the organism are the outermost points between the two "sides" of the organism. When connected, these points form the left-right axis (commonly abbreviated to LR axis. In Latin, this is called the dextro-sinistral (or, less commonly, the sinistro-dextral) axis, from dexter (right) and sinister (left). The "left" and "right" refer to the sides of the organism, and not those of the observer.
"Left-right" is typically used in English and some other languages.[clarification needed]
As with the other directions, the terms can be used as relative terms, to describe locations along the left-right axis. Thus, in Fig. 2 the dorsal fin is right of the left pectoral fin, but is left of the right eye. However, as left and right sides are mirror images, use like this tends to be somewhat confusing, as structures are duplicated on both sides (i.e., in the previous example, there is both a right eye and a left eye, forcing one to specify which is used as a reference).
To counter this clumsiness of use, the directional term lateral (Latin: lateralis; "to the side") is used as a modifier for both sides, yielding the left lateral and right lateral sides. As an opposite to lateral, the term median (Latin: medius; "middle") is used to define a point in the centre of the organism (where the left-right axis intersects the midsagittal plane —see below), and the term medial means "toward the median plane". Thus, rather than "left-right" axis and its inherent clumsiness of usage, the term mediolateral axis is frequently used. Sometimes this is abbreviated to ML axis. In proper usage, the ML axis is a half-axis; in practice, its use is less clumsy and less linguistically biased than "left-right". The terms may still be used relatively to describe locations along the LR axis. Thus, in Fig. 2 the gills are medial to the operculum, but lateral to the heart.
The use "mediolateral" is strictly used to describe relative position along the left-right axis, to avoid confusion with the terms "superficial" and "deep".
The term proximal (Latin: proximus, "nearest") describes where the appendage joins the body, and the term distal (Latin: distare, "to stand away from") is used for the point furthest from the point of attachment to the body. Since appendages often move independently of the main body, and therefore change position with respect to, these separate directional terms are used when describing them.
As noted above, the standard AP, DV, and ML directional axes can cause some confusion when describing parts of the body that can change position relative to the main body. This is particularly true when considering appendages such as fins, limbs and indeed any structure that extends and can at least potentially move separately from the main body. [a]
By connecting the two points, the proximodistal axis is created. (The abbreviation AB axis is occasionally, but not commonly, used.) As before, the terms "proximal" and "distal" can be used as relative terms to indicate where structures lie along the proximodistal axis. Thus, the "elbow" is proximal to the hoof, but distal to the "shoulder" in Figs. 3 and 4.
Choosing terms for the other two axes perpendicular to the proximodistal axis could be variable, as they would also depend on the position of the limb. For that reason, when considering any organism, the other two axes are considered to be relative to the appendage when in standard anatomical position. This is roughly defined for all organisms, as in the normal position when at rest and not moving. For tetrapod vertebrates, this includes the caveat that they are standing erect and not lying down. Thus, the fish in Fig. 2, and the horse in Figs. 3 and 4 are in standard anatomical position.
Similar to appendages that branch out from the body, the directions of blood vessels may be labeled with the terms ostial, referring to the ostium or opening where the vessel branches off, and distal, referring to the extreme end away from the branch point, may be used.
These two terms relate to the distance of a structure from the surface of an organism.
Deep: further away from the surface of the organism. For example, the external abdominal muscular layers are deep to the skin, but superficial to the intestines. In English "deep" is one of the few terms from the vernacular that have become prevalent in anatomical terminology; the anglicised Latin term to match "superficial" would have been "profound" (Latin: profundus, "due to depth"), and in other languages the equivalent term usually is derived from profundus (e.g. profond, meaning deep, in French).
Several other terms are also used to describe location. These terms are not used to form the fixed axes. Terms include:
The terms of zootomy and anatomy came into use at a time when all scientific communication took place in Latin. In their original Latin forms the respective meanings of "anterior" and "posterior" are in front of (or before) and behind (or after), those of "dorsal" and "ventral" are toward the spine and toward the belly, and those of "superior" and "inferior" are above and below. From these meanings it can be seen that in the most general terms the anterior/posterior axis is oriented to the direction of forward motion, the dorsal/ventral axis is oriented to the anatomy of the vertebrate torso, and the superior/inferior axis is oriented to gravity.
For almost all vertebrates, including almost all bipeds, these axes all provide a consistent reference for anatomical positions across species—with the inferior/superior axis being roughly the same as the dorsal/ventral axis, and therefore redundant. Humans, however, have the rare property of having a torso oriented perpendicular to their direction of forward motion—while their head orientation remains consistent with other vertebrates on this axis. This makes the dorsal/ventral axis on humans redundant with the anterior/posterior axis, and the inferior/superior axis necessary. Because of this difference with humans, the anterior/posterior and inferior/superior axes are inconsistent between humans and other vertebrates in torso anatomy but consistent in head anatomy. As all three of these axes are used in the naming of anatomical structures, and most human anatomical structures are shared by other animals, these differences can lead to considerable confusion. For example, in the naming of brain structures, the non-human context of the dorsal/ventral axis was used. Therefore, in human anatomy, "dorsal" can refer to two different (perpendicular) directions—the posterior direction in the context of the torso, and the superior direction in the context of the brain. Confusingly then, the "dorsal" direction in the human brain, being perpendicular to the "dorsal" direction in the human torso, conflicts with the direction that might be inferred from the literal Latin meaning of "dorsum": a back or a mountain ridge.
Most animals, furthermore, are capable of moving relative to their environment. So while "up" might refer to the direction of a standing human's head, the same term ("up") might be used to refer to the direction of the belly of a supine human. It is also necessary to employ some specific anatomical knowledge in order to apply the terminology unambiguously: For example, while the ears would be superior to (above) the shoulders in a human, this fails when describing the armadillo, where the shoulders are above the ears. Thus, in veterinary terminology, the ears would be cranial to (i.e., "toward the head from") the shoulders in the armadillo, the dog, the kangaroo, or any other terrestrial vertebrate, including the human. Likewise, while the belly is considered anterior to (in front of) the back in humans, this terminology fails for the flounder, the armadillo, and the dog. In veterinary terms, the belly would be ventral ("toward the abdomen") in all vertebrates.
While it would be possible to introduce a system of axes that is completely consistent between humans and other vertebrates by having two separate pairs of axes, one used exclusively for the head (e.g., anterior/posterior and inferior/superior) and the other exclusively for the torso (e.g., dorsal/ventral and caudal, or "toward the tail"/rostral, or "toward the beak"), doing so would require the renaming of very many anatomical structures.
For a quick comparison of equivalent terminology used in vertebrate and human anatomy, see Table 3 (below).
|Table 3: Equivalent directional terms used in|
vertebrate zoology and human anatomy
|Vertebrate zootomy||Human torso||Human head|
|Anterior||Rostral, Cranial, Cephalic1||Anterior||Ventral, Front||Anterior||Rostral, Front|
|Posterior||Caudal||Posterior||Dorsal, Back||Posterior||Caudal, Back|
|Dorsal||—||Superior||Same1, Up||Superior||Dorsal, Up|
|Ventral||—||Inferior||Caudal1, Down||Inferior||Ventral, Down|
|lateral||Away from the middle||Same||—||Same||—|
|Proximal||Away from extremity||Same||—||Same||—|
(1) Rarely used.
(2) Strictly relative term, used with other locational descriptors.
Together, the AP, DV and LR (or ML) axes allow for precise three-dimensional descriptions of location within any bilaterally symmetrical organism, whether vertebrate or invertebrate. In practice, the terms can cause some confusion when, unlike the fish shown in Fig. 2, the organism in question is not strictly linear in form, which includes most tetrapods (see Figs. 3 and 4). For example, the AP axis in Fig. 3 does not appear to be at right angles to the DV axis. Rather, it is a depiction of the approximate average AP axis, when all body segments are included.
When considering any one segment, the dorsoventral axis is perpendicular to the AP axis. Thus, in Fig. 4, the DV axis of the tail would run from the "back" of the tail (posterior end of the trunk), to the "underside" of the tail (near the legs) — nearly parallel to the AP axis of the main body.
As a general rule of thumb, if the body is included in consideration, the AP axis of the main body would be used, as would the DV and ML axes perpendicular to it. However, if considering only one segment, the AP axis would shift to reflect the axes shown in Fig. 4, with the DV and ML axes shifting correspondingly. In alternative manner, to avoid confusion, AP, DV, and ML terms are used strictly in relation to the main body, and the terms proximal and distal are used for body segments such as the head, neck, and tail (see below).
To avoid this confusion, in veterinary medicine, the terms anterior, posterior, superior, and inferior are in general avoided except for certain structures within the head. By using the terms cranial, caudal, dorsal and ventral, all tetrapod organisms (including bipeds) can be described uniformly.
The large variety of body shapes present in invertebrates presents a difficult problem when attempting to apply standard directional terms. Depending on the organism, some terms are taken by analogy from vertebrate anatomy, and appropriate novel terms are applied as needed. Some such borrowed terms are widely applicable in most invertebrates; for example proximal, literally meaning "near" refers to the part of an appendage nearest to where it joins the body, and distal, literally meaning "standing away from" is used for the part furthest from the point of attachment. In all cases, the usage of terms is dependent on the bauplan of the organism.
In organisms with a changeable shape, such as amoeboid organisms, most directional terms are meaningless, since the shape of the organism is not constant and no distinct axes are fixed. Similarly, in spherically symmetrical organisms, there is nothing to distinguish one line through the centre of the organism from any other. An indefinite number of triads of mutually perpendicular axes could be defined, but any such choice of axes would be useless, as nothing would distinguish a chosen triad from any others. In such organisms, only terms such as superficial and deep, or sometimes proximal and distal, are usefully descriptive.
In organisms that maintain a constant shape and have one dimension longer than the other, at least two directional terms can be used. The long or longitudinal axis is defined by points at the opposite ends of the organism. Similarly, a perpendicular transverse axis can be defined by points on opposite sides of the organism. There is typically no basis for the definition of a third axis. Usually such organisms are planktonic (free-swimming) protists, and are nearly always viewed on microscope slides, where they appear essentially two-dimensional. In some cases a third axis can be defined, particularly where a non-terminal cytostome or other unique structure is present.
Some elongated protists have distinctive ends of the body. In such organisms, the end with a mouth (or equivalent structure, such as the cytostome in Paramecium or Stentor), or the end that usually points in the direction of the organism's locomotion (such as the end with the flagellum in Euglena), is normally designated as the anterior end. The opposite end then becomes the posterior end, and by connecting them, an anteroposterior axis is formed. Properly, this terminology would apply only to an organism that is always planktonic (not normally attached to a surface), although the term can also be applied to one that is sessile (normally attached to a surface).
Organisms that are attached to a substrate, such as sponges, or some animal-like protists also have distinctive ends. The part of the organism attached to the substrate is usually referred to as the basal end (Latin: basis, "support/foundation"), whereas the end furthest from the attachment is referred to as the apical end (Latin: apex, "peak/tip"). Thus, by joining the two ends, an apical-basal axis is formed. Transverse axes may be defined indifferently in any direction perpendicular to this axis, as there is no symmetry present.
Radially symmetrical organisms include those in the group Radiata—primarily jellyfish, sea anemones and corals and the comb jellies. Adult echinoderms, such as starfish, sea urchins, sea cucumbers and others are also included, since they are pentaradial, meaning they have five discrete rotational symmetry. Echinoderm larvae are not included, since they are bilaterally symmetrical. Radially symmetrical organisms always have one distinctive axis.
Cnidarians (jellyfish, sea anemones and corals) have an incomplete digestive system, meaning that one end of the organism has a mouth, and the opposite end has no opening from the gut (coelenteron). For this reason, the end of the organism with the mouth is referred to as the oral end (Latin: oris, "mouth"), and the opposite surface is the aboral end (Latin: ab-, prefix meaning "away from"). By joining the polar opposite oral and aboral ends, an oral-aboral axis is formed.
Unlike vertebrates, cnidarians have no other distinctive axes. "Lateral", "dorsal", and "ventral" have no meaning in such organisms, and all can be replaced by the generic term peripheral (Latin: peri-, "around"). Medial can be used, but in the case of radiates indicates the central point, rather than a central axis as in vertebrates. Thus, there are multiple possible radial axes and medio-peripheral (half-) axes. However, it is noteworthy that some biradially symmetrical comb jellies do have distinct "tentacular" and "pharyngeal" axes and are thus anatomically equivalent to bilaterally symmetrical animals.
|Table 2: Comparison of Directional Terms used in|
Radially Symmetrical1 and Bilaterally Symmetrical Animals
|Bilateral Bauplans||Radial Bauplans|
|Anterior||Rostral, Cranial, Cephalic2||Oral||Apical3|
(1) Includes both Radiates and adult Echinoderms.
(2) Rarely used.
(3) Only in organisms attached to a substrate.
(4) Vertebrate equivalents are meaningless in radial animals.
(5) Roughly equivalent to "superficial".
(6) Roughly equivalent to "deep".
Figure 10: Aurelia aurita, another species of jellyfish, showing multiple radial and medio-peripheral axes.
Two specialized terms are useful in describing views of arachnid legs and pedipalps. Prolateral refers to the surface of a leg that is closest to the anterior end of an arachnid's body. Retrolateral refers to the surface of a leg that is closest to the posterior end of an arachnid's body.
Because of the unusual nature and positions of the eyes of the Araneae (spiders), and their importance in taxonomy, evolution and anatomy, special terminology with associated abbreviations has become established in arachnology. Araneae normally have eight eyes in four pairs. All the eyes are on the carapace of the prosoma, and their sizes, shapes and locations are characteristic of various spider families and other taxa. In some taxa not all four pairs of eyes are present, the relevant species having only three, two, or one pair of eyes. Some species (mainly troglobites) have no functional eyes at all.
In what is seen as the likeliest ancestral arrangement of the eyes of the Araneae, there are two roughly parallel, horizontal, symmetrical, transverse rows of eyes, each containing two symmetrically placed pairs, respectively called: anterior and posterior lateral eyes (ALE) and (PLE); and anterior and posterior median eyes (AME) and (PME).
As a rule it is not difficult to guess which eyes are which in a living or preserved specimen, but sometimes it can be. Apart from the fact that in some species one or more pairs may be missing, sometimes eyes from the posterior and anterior rows may be very close to each other, or even fused. Also, either one row or both might be so grossly curved that some of the notionally anterior eyes actually may lie posterior to some of the eyes in the posterior row. In some species the curve is so gross that the eyes apparently are arranged into two anteroposterior parallel rows of eyes.
Aspects of spider anatomy; This aspect shows the mainly prolateral surface of the anterior femora, plus the typical horizontal eye pattern of the Sparassidae
Typical arrangement of eyes in the Lycosidae, with PME being the largest
In the Salticidae the AME are the largest
|This article cites its sources but does not provide page references. (February 2014)|