Mazda MX-6

From Wikipedia, the free encyclopedia - View original article

Mazda MX-6
Mazda MX-6.jpg
Overview
ManufacturerMazda
Production1987–1997
AssemblyFlat Rock, Michigan, United States (AAI)
Hiroshima, Japan
Hofu, Japan
Body and chassis
ClassSport compact
Body style2-door coupé
LayoutFF layout
Powertrain
Transmission4-speed automatic
5-speed manual
Chronology
PredecessorMazda 626 coupé
 
Jump to: navigation, search
Mazda MX-6
Mazda MX-6.jpg
Overview
ManufacturerMazda
Production1987–1997
AssemblyFlat Rock, Michigan, United States (AAI)
Hiroshima, Japan
Hofu, Japan
Body and chassis
ClassSport compact
Body style2-door coupé
LayoutFF layout
Powertrain
Transmission4-speed automatic
5-speed manual
Chronology
PredecessorMazda 626 coupé

The Mazda MX-6 was a front-wheel drive sporty coupé produced by Mazda between 1987 and 1997. It was called the Mazda Capella in Japan until 2002 before being renamed Mazda Atenza/Mazda6.

The MX-6 was mechanically identical to the Mazda 626 and subsequently the Ford Probe. These cars shared the GD (1988–1992) and GE (1993–1997) platforms. The MX-6 replaced the 626 Coupé, although it continued to share the same chassis. Mazda shared the GD and GE chassis with Ford for their own Probe. The MX-6, 626 and Ford Probe were made together in joint-venture plants either by AutoAlliance in Flat Rock, MI for the North American market, and by Mazda Japan for Asian and European Markets.


First generation (1988–1992)[edit]

First generation
'90-'92 Mazda MX-6.jpg
Overview
Also calledMazda 626 Coupé
Mazda Capella C2
Mazda 626 GLX
Production1987-1992
DesignerHiroshi Yamamoto (1985)
Body and chassis
PlatformMazda GD platform
RelatedFord Probe
Mazda 626
Mazda Capella
Powertrain
Engine

North American market
2.2L 110 hp (82 kW) I4 F2
2.2L 145 hp (108 kW) I4 F2T
European market
1.8L 80 hp (60 kW) I4 F8
2.0L 112 hp (84 kW) I4 FE
2.0L 145 hp (108 kW) I4 FE-DOHC

2.2L 145 hp (108 kW) I4 F2
Japanese Domestic market
1.8L 80 hp (60 kW) I4 F8
2.0L 145 hp (108 kW) I4 FE-DOHC
Dimensions
Wheelbase99 in (2,514.6 mm)
Length177 in (4,495.8 mm)
Width66.5 in (1,689 mm)
Height53.5 in (1,359 mm)

The first generation MX-6 appeared in 1987 and lasted until 1992 in the United States. In some markets the model years were from 1987 to 1991. It was based on a series of futuristic sports compact concept cars of the early 1980s. It was a large coupé, based on the Mazda GD platform, and was powered by the I4 Mazda F engines. It used the Mazda G4A-EL 4 speed electronic shift automatic transmission. The US market made use of the F2 2.2 L engine, with the base engine produced 110 hp (82 kW), but a 145 hp (108 kW) turbocharged version was available. European and Japanese market versions were shipped with either the F8 1.8 L, FE 2.0 L or FE-DOHC 2.0 L DOHC engines.

The MX-6 was produced with two transmission options, a five-speed manual transmission or a four-speed automatic with overdrive. The MX-6 was also known to be a very reliable car, mechanically.

This generation was available in several trim levels, which differ depending on the market the vehicle was sold in. In the United States, the MX-6 was available in DX, LX, LE, and GT trim levels:

In 1989, Mazda offered a special four-wheel steering (commonly abbreviated 4WS) option on MX-6 GTs destined for the U.S. This system consisted of an electronically controlled rear steering rack that turned the rear wheels opposite to the fronts at low speeds to improve cornering, and turned the rear wheels with the fronts at high speeds to improve highway lane change maneuvering. This option was available through all years for GT models in other markets.

European spec vehicles shipped as the 626 Coupé and commonly received either the 1.8 L SOHC F8 or 2.0 L SOHC FE engine in GLX models, or the 2.0 L FE-DOHC engine in their GT models. 4WS was a common option for European 626 Coupés. Australian vehicles were almost always equipped with the 2.2 L turbocharged F2T engine as the US models, as well as 4WS. They also carried the MX6 name of the American models.

Asian spec vehicles were shipped as the Capella C2 and were available in several trims, most notably GT-R (FE-DOHC and 4WS), GT-X (FE-DOHC and AAS) or GT-S (F8 and 4WS or AAS).

New Zealand received vehicles in either European spec or Australian spec, selectable on order. As such, NZ GTs can have either the F2T 2.2 L turbocharged engine or the FE-DOHC 2.0 L DOHC, with optional 4WS.


Second generation (1991–1997)[edit]

Second generation
Mazda-MX-6.jpg
Overview
Also calledMazda MX-6 Mystère (For Canada)
Production1991-1997
DesignerYasuo Aoyagi (1989)
Body and chassis
PlatformMazda GE platform
RelatedFord Probe
Mazda 626
Eunos 500 (Mazda Xedos 6)
Mazda Capella
Powertrain
Engine2.0L 119 hp (89 kW; 121 PS) FS-DE I4
2.0L 159 bhp (119 kW; 161 PS) KF-ZE V6
2.5L 164 hp (122 kW; 166 PS) KL-DE V6
2.5L 198 hp (148 kW; 201 PS) KL-ZE V6
Dimensions
Wheelbase102.8 in (2,611 mm)
Length177.5 in (4,508 mm)
Width68.9 in (1,750 mm)
Height51.6 in (1,311 mm)
Curb weight2,775 lb (1,259 kg)

In 1991 Mazda unveiled the new MX6, commonly referred to as the second generation. It used the new GE platform, shared by the 626 and Ford rebadged cars, the Ford Probe and the Ford Telstar. It was released in three distinct variants worldwide, known as A-spec, E-spec and J-spec, which relates to their destined markets – US, Europe and Japan, respectively.

A-spec[edit]

The A-spec variant was for the North American market only. It was built alongside the Ford Probe and Mazda 626 from 1992 as a 1993 model by AutoAlliance International in Flat Rock, Michigan. There were three trim levels available on the A-spec models:

In 1995 the second generation MX6 was refreshed with different 5-spoke alloy wheels, twin airbags and emissions changes. Another major change after 1995 was the addition of OBD-II to the car. With this addition the 164 hp (122 kW) was decreased to 160 hp (120 kW) for every year thereafter. Known as the 'GE2', this model ran until 1997. Interesting to note is that unlike the first generation, the second generation MX6 only had one model with a different moniker - the Canadian MX-6 Mystère.

E-spec[edit]

Built from 1991 in Japan, for Australia, New Zealand, and Europe. Compared to the A-spec, it has different headlights (a two-piece projector setup giving far greater lighting) and taillights, different front and rear bumpers, fog lights, wing-mirrors (power+heated), steering wheel, interior trim and alloys as standard. The side indicator lights were mounted behind the front wheels, and there are no corner bumper lights. It also came with optional air conditioning and leather interior (standard from 96), and the MX6’s main act – the 4WS system (not available in the UK). The engine was the same as the US version (although not limited by lower octane fuels) – the KL-DE 2.5 DOHC V6 engine, again making 164 hp (122 kW) and with the higher octane fuels used in Europe as standard, slightly lower mpg but with greater performance.

In Australia, the MX-6 was released in November 1991. Only one trim was available. Equipped with the KL-DE 2.5 DOHC V6 engine, sunroof, 4WS etc., with the only remaining options being leather and electric seats. September 1994 was the release of the GE2 update model. Like Mazda Australia did with the GD2, there were now two choices – the 4WS all options MX6, or the 2WS version. They both had new wheels, interior trim, and steering wheel, but only the 4WS version got the sunroof, CD player, leather (which actually only became standard in late '96) and the digital climate control. The MX-6 lasted until 1997, with the last few rolling out of dealers in 1998.

J-spec[edit]

This version was also released in 1991, and is very similar to the E-spec (as they are built in the same place), but with minor changes. The version sold in Japan was exclusive to Japanese Mazda dealerships, and was not badge engineered and sold at other Mazda Japanese dealerships, unlike the MX-3, the MX-5, and the RX-7 coupes. One piece headlights were fitted, with indicators incorporated in the fog light housing, as well as a different rear bumper with smaller registration plate cutout, similar to the A-spec. Almost everything was an option, but the 4WS was available, as well as the digital climate control, electric folding mirrors, larger centre console, and of course, the Mazdaspeed body add-ons – a subtle lip kit with Supra-style high rise rear spoiler.

Engine choice was the KL-ZE 2.5 DOHC V6 making 199 bhp (148 kW), a high compression version of the KL-DE, or the KF-ZE 2.0 DOHC V6 making 159 bhp (119 kW), all of the K series engines in the MX6 were based on the same engine block and included those found in the Ford Probe, Xedos 6 and MX-3 V6 models. The KLZE had appromixately 40 more horsepower than the KLDE versions for a few reasons. Although the displacement was the same, the KLZE had more durations on the cams, higher compression due to a different shape of pistons, and the intake manifold was different on the ZE. The KL-ZE intake manifold runners were shorter and wider than the KL-DE manifold. Also, the heads on the KL-ZE were ported and shaped differently. Not only was the ZE higher in compression, but was also a higher reving engine as well. The only flaw in the KL-ZE design were the weaker valve springs on the intake valves. This is usually corrected by using the KL-DE springs, keepers, and retainers which are a little stronger.

4WS (Four Wheel Steering)[edit]

Used from 1987 to 1998 on both MX-6 GT and GE models.
It was available on both the first generation and second generation MX-6 models, although the North American market only received it for the 1989 GT model. South African MX-6s never received 4WS.
According to Mazda, the system provided:

The system electronically controlled a rear rack that was behind the rear wheels. At low speeds (of up to 35 km/h), the rear wheels would move in the opposite direction to the front wheels, aiding parking and U-turns by lowering the turning circle. Above these speeds, the rear wheels would move in the same direction as the fronts, meaning control during high speed maneuvers such as lane changes or cornering was improved. Either way, the turning angle of the rear wheels was slight at just five degrees, a measurement Mazda determined to be optimally effective and natural to human sensitivity.
Note:

Models[edit]

YearModelEnginePowerTorque0–60 mph (97 km/h)1/4 mi (0.4 km)Top speed
1988–1992DX, LX, LE2.2 L (2184 cc) F2 I4110 hp (82 kW)130 lb·ft (176 N·m)sub 9 secs16.5 at 88 mph126 mph (202 km/h)
1988–1992GT2.2 L (2184 cc) F2T turbo I4145 hp (108 kW)190 lb·ft (258 N·m)7.515.4 at 92 mph130 mph (209 km/h)
1993–1997RS2.0 L (1991 cc) FS I4118 hp (88 kW)127 lb·ft (172 N·m)116 mph
1993–1997LS2.5 L (2497 cc) KL-DE V6164 hp (122 kW) at 5600 rpm160 lb·ft (212 N·m) at 4500 rpm7.015.3 at 92 mph (148 km/h)138 mph (224 km/h)
1993–1997LS2.5 L (2497 cc) KL-ZE(J-Spec) V6200 hp at 6500 rpm165 lb·ft (212 N·m) at 5500 rpm6.214.9 at 97141 mph (~225–230 km/h)

References[edit]

External links[edit]