From Wikipedia, the free encyclopedia - View original article
Classical marimba, model Antonko AMC-12
(Sets of percussion sticks)
|See list of marimbists|
|See list of marimba manufacturers|
Classical marimba, model Antonko AMC-12
(Sets of percussion sticks)
|See list of marimbists|
|See list of marimba manufacturers|
The marimba (//) is a percussion instrument consisting of a set of wooden bars struck with mallets to produce musical tones. Resonators attached to the bars amplify their sound. The bars are arranged as those of a piano, with the accidentals raised vertically and overlapping the natural bars (similar to a piano) to aid the performer both visually and physically. This instrument is a type of xylophone, but with broader and lower tonal range and resonators.
Modern uses of the marimba include solo performances, woodwind and brass ensembles, marimba concertos, jazz ensembles, marching band (front ensembles), drum and bugle corps, and orchestral compositions. Contemporary composers have used the unique sound of the marimba more and more in recent years.
Xylophones are widely used in music of west and central Africa. The name marimba stems from Bantu marimba or malimba, 'xylophone'. The word itself is formed from ma 'many' and rimba 'single-bar xylophone'.
Diatonic xylophones were introduced to Central America in the 16th or 17th century. First historical record of Mayan musicians using gourd resonator marimbas in Guatemala was made in 1680, by the historian Domingo Juarros. It became more widespread during the 18th and 19th centuries, as Mayan and Ladino ensembles started using it on festivals. In 1821, marimba was proclaimed the national instrument of Guatemala on its independence proclamation.
The gourd resonators were later replaced by harmonic wooden boxes, and the keyboard was expanded to about five diatonic octaves. Variants with slats made of steel, glass or bamboo instead of wood appeared during the 19th century.
The name marimba was later applied to the orchestra instrument inspired by the Latin American model. In the United States, companies like Deagan and Leedy company adapted the Latino American instruments for use in western music. Metal tubes were used as resonators, fine-tuned by rotating metal discs at the bottom; lowest note tubes were U-shaped. The marimbas were first used for light music and dance, such as Vaudeville theater and comedy shows. Clair Omar Musser was a chief proponent of marimba in the United States at the time.
French composer Darius Milhaud made the ground-breaking introduction of marimbas into Western classical music in his 1947 Concerto for Marimba and Vibraphone. Newly invented four-mallet grip enabled playing chords, and the innovation enhanced the interest for the instrument. In the late 20th century, modernist and contemporary composers found new ways to use marimba: notable examples include Leoš Janáček (Jenufa), Carl Orff (Antigonae), Karl Amadeus Hartmann, Hans Werner Henze (Elegy for Young Lovers), Pierre Boulez (Le marteau sans maître) and Steve Reich.
Marimba bars are typically made of either wood or synthetic material. Rosewood is the most desirable, while Padouk is a popular affordable alternative. Bars made from synthetic materials generally fall short in sound quality in comparison to wooden bars, but are less expensive and yield added durability and weather resistance, making them suitable for outdoor use; marimbas with wooden bars are usually played inside because the bars are susceptible to pitch change due to weather. Bubinga (Guibourtia demeusei) and mahogany have also been cited as comparable to rosewood in quality for use as marimba bars. The specific rosewood, Dalbergia stevensonii, only grows in Southern Guatemala and Belize, formerly the British Honduras, hence its common name. This wood has a Janka rating of 2200, which is about three times harder than Silver Maple. The bars are wider and longer at the lowest pitched notes, and gradually get narrower and shorter as the notes get higher. During the tuning, wood is taken from the middle underside of the bar to lower the pitch. Because of this, the bars are also thinner in the lowest pitch register and thicker in the highest pitch register.
In Africa, most marimbas are made by local artisans from locally available materials.
Marimba bars produce their fullest sound when struck just off center, while striking the bar in the center produces a more articulate tone. On chromatic marimbas, the accidentals (black keys) can also be played on the space between the front edge of the bar and its node (the place where the string goes through the bar) if necessary. Playing on the node produces a sonically weak tone, and the technique is only used when the player or composer is looking for a muted sound from the instrument.
There is no standard range of the marimba, but the most common ranges are 4 octaves, 4.3 octaves and 5 octaves; 4.5, 4.6 and 5.5 octave sizes are also available.
The range of the marimba has been gradually expanding, with companies like Marimba One adding notes up to F above the normal high C (C7) on their 5.5 octave instrument, or marimba tuners adding notes lower than the low C on the 5 octave C2. Adding lower notes is somewhat impractical; as the bars become bigger and the resonators become longer, the instrument must be taller and the mallets must be heavier in order to produce a tone rather than just a percussive attack. Adding higher notes is also impractical because the hardness of the mallets required to produce the characteristic tone of a marimba are much too hard to play with in almost any other, lower range on the instrument.
The marimba is a non-transposing instrument with no octave displacement, unlike the xylophone which sounds one octave higher than written and the glockenspiel which sounds two octaves higher than written.
In the most traditional versions, various sizes of natural gourds are attached below the keys to act as resonators; in more sophisticated versions carved wooden resonators are substituted, allowing for more precise tuning of pitch. In Central America and Mexico, a hole is often carved into the bottom of each resonator and then covered with a delicate membrane taken from the intestine of a pig to add a characteristic "buzzing" or "rattling" sound known as charleo. In more contemporary-style marimbas, wood is replaced by PVC tubing. The holes in the bottoms of the tubes are covered with a thin layer of paper to produce the buzzing noise.
The length of the resonators varies according to the frequency that the bar produces. Vibrations from the bars resonate as they pass through the tubes, which amplify the tone in a manner very similar to the way in which the body of a guitar or cello would. In instruments exceeding 4½ octaves, the length of tubing required for the bass notes exceeds the height of the instrument. Some manufacturers, such as DeMorrow and Malletech, compensate for this by bending the ends of the tubes. This involves soldering smaller straight sections of tubes to form "curved" tubes. Both DeMorrow and Malletech use brass rather than aluminium. Others, such as Adams and Yamaha, expand the tubes into large box-shaped bottoms, resulting in the necessary amount of resonating space without having to extend the tubes. This result is achieved by the custom manufacturer Marimba One by widening the resonators into an oval shape, with the lowest ones reaching nearly a foot in width, and doubling the tube up inside the lowest resonators.
Resonator tuning involves adjusting "stops" in the tubes themselves to compensate for temperature and humidity conditions in the room where the instrument is stored. Some companies offer adjustment in the upper octaves only. Others do not have any adjustable stops. Still some companies (Malletech and DeMorrow) offer full range adjustable stops.
On many marimbas, decorative resonators are added to fill the gaps in the accidental resonator bank. In addition to this, the resonator lengths are sometimes altered to form a decorative arch, such as in the Musser M-250. This does not affect the resonant properties, because the end plugs in the resonators are still placed at their respective lengths.
The mallet shaft is commonly made of wood, usually birch, but may also be rattan or fiberglass. The most common diameter of the shaft is around 8 mm. Shafts made of rattan have a certain elasticity to them, while birch has almost no give. Professionals use both depending on their preferences, whether they are playing with two mallets or more, and which grip they use if they are using a four-mallet grip.
Appropriate mallets for the instrument depend on the range. The material at the end of the shaft is almost always a type of rubber, usually wrapped with yarn. Softer mallets are used at the lowest notes, and harder mallets are used at the highest notes. Mallets that are too hard will damage the instrument, and mallets that might be appropriate for the upper range could damage the notes in the lower range (especially on a padouk or rosewood instrument). On the lower notes, the bars are larger, and require a heavier mallet to bring out a strong fundamental. Because of the need to use different hardnesses of mallets, some players, when playing with four or more mallets, might use graduated mallets to match the bars that they are playing (softer on the left, harder on the right).
Some mallets, called "two-toned" or "multi-tonal", have a hard core, loosely wrapped with yarn. These are designed to sound articulate when playing at a loud dynamic, and broader at the quieter dynamics.
Modern marimba music calls for simultaneous use of between two and four mallets (sometimes up to six or eight), granting the performer the ability to play chords or music with large interval skips more easily. Multiple mallets are held in the same hand using any of a number of techniques or grips. For two mallets in each hand, the most common grips are the Burton grip (made popular by Gary Burton), the Traditional Grip (or "cross grip") and the Musser-Stevens grip (made popular by Leigh Howard Stevens). Each grip is perceived to have its own benefits and drawbacks. For example, some marimbists feel the Musser-Stevens grip is more suitable for quick interval changes, while the Burton grip is more suitable for stronger playing or switching between chords and single-note melody lines. The Traditional Grip gives a greater dynamic range and freedom of playing. The choice of grip varies by region (the Musser-Stevens grip and the Burton grip are more popular in the United States, while the traditional grip is more popular in Japan), by instrument (the Burton grip is less likely to be used on marimba than on a vibraphone) and by the preference of the individual performer.
Six-mallet grips consist of variations on these three grips. Six mallet marimba grips have been used for years by Mexican and Central American marimbists. Keiko Abe has written a number of compositions for six mallets, including a section in her concerto Prism Rhapsody. Other marimbists/composers using this technique include Dean Gronemeier, Robert Paterson (who has written for and commissioned more works using six-mallet technique than anyone in the world) and Kai Stensgaard. Paterson's grip is based on the Burton grip, and his grip and technique have been called the Paterson grip, and even the Wolverine grip. Paterson states that his technique differs from others in that there is less emphasis places on block chords on the lower bank of notes (the naturals or white notes) and more emphasis on independence, one-handed rolls, and alternations between mallets 12-3 or 1-23 in the left hand (or 45-6 or 4-56 in the right hand, respectively), and so on. In 2012, Paterson released the world's first all six-mallet marimba album entitled Six Mallet Marimba, demonstrating these techniques via works Paterson has written. Ludwig Albert published at first a work for 8 mallets and demonstrated the Ludwig Albert 8 mallet grip based on the traditional grip from 1995.
Traditional marimba bands are especially popular in Guatemala where they are the national symbol of culture, but are also strongly established in the Mexican states of Chiapas, Tabasco and Oaxaca, Honduras, El Salvador, Nicaragua and Costa Rica, as well as among Afro-Ecuadorians and Afro-Colombians.
There have been numerous jazz vibraphonists who also played the marimba. Notable among them are Gary Burton, David Friedman, Stefon Harris, Bobby Hutcherson, Joe Locke, Steve Nelson, Red Norvo, Dave Pike, Gloria Parker, Dave Samuels and Arthur Lipner.
Marimba was played famously by Brian Jones in the Rolling Stones' songs Under My Thumb and Out of Time. Island Girl by Elton John and Moonlight Feels Right by Starbuck also prominently feature the instrument. Ruth Underwood played an electrically amplified marimba in Frank Zappa's Mothers of Invention. Art Tripp played the marimba on several of Captain Beefheart & the Magic Band's albums, most notably on Lick My Decals Off, Baby and The Spotlight Kid. Victor Feldman played the marimba on several of Steely Dan's early albums. It is played at the start of Mamma Mia by ABBA. Percussionist Evelyn Glennie has collaborated with Björk and can be heard playing the marimba on Post and Telegram, as well as Oxygen. Thompson Twins included marimba in their many '80s works. Jack White played marimba on The Nurse, a song on The White Stripes' album Get Behind Me Satan. In 2003, Marina Calzado Linage recorded an album bridging the gap between academic and popular music, Marimba de Buenos Aires, featuring music by Ástor Piazzolla. In 2009, Canadian musician Spencer Krug, working under the moniker Moonface, released a 20-minute continuous piece called Dreamland EP: Marimba And Shit-Drums with Jagjaguwar. The recording consists entirely of marimba, drums and vocals and comprises many movements and recurring themes. Vincent Montana Jr. played the marimba on one of the great socially-conscious soul songs of the early '70s People Make the World Go Round by The Stylistics. The experimental band Coil (band) used the marimba in its later performances such as Selvaggina, Go Back into the Woods and studio albums The Ape of Naples and Black Antlers.
Flapamba (from Emil Richards Collection)
|Classification||Percussion instrument (Idiophone)|
The flapamba is a musical instrument in the percussion family. It consists of tuned wooden bars pinched on one side (over the node), and mounted over resonator boxes. Sliding the bars slightly forward or backward affects their tuning. Unlike marimba or xylophone however, the sound is not as focused tonally, as it is a bit more percussive (closer to tuned log drums).
Part of what makes the flapamba’s characteristic sound is the tuning; for instance, the resonators are not tuned to the bars as in other standard keyboard percussion instruments. Renowned studio percussionist Emil Richards bought his original flapamba from Professional Drum Shop in Hollywood in the late 60's/ early 70's, and added it to his giant instrument collection, the Emil Richards Collection. The staff at the store convinced him to buy it, as they told him that they were getting out of the percussion rental business since Emil was dominating much of the work in town. Emil couldn't find any info on the history or maker of the flapamba when he purchased it, but nevertheless he started using it on recording sessions, as the chromatic layout of the instrument made it an easy transition from other keyboard mallet instruments. He used the softest mallets possible or the meat of the fingers to get a warm, resonant, wooden sound. This original flapamba had a range from middle C (C4), up two full octaves.
In the 2000s, Emil decided that he’d like the flapamba to have an additional lower range, so specialty mallet craftsman Chris Banta made new bars spanning F2 to C4, and dubbed this the “bass flapamba”. He also replaced the bars on the original set to maintain continuity of sound between both sets, and changed the finish to a blonde color from the original set’s brown. Both sets combined have a range from F2-C6. Emil’s flapamba has been heard on countless soundtracks and other recordings, such as on the television shows Lost, Daktari, and Kung Fu.
|Wikimedia Commons has media related to Marimba.|