Lignin

From Wikipedia, the free encyclopedia - View original article

Lignin
Lignin structure.svg
Identifiers
CAS number9005-53-2 YesY
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 N (verify) (what is: YesY/N?)
Infobox references
 
Jump to: navigation, search
Lignin
Lignin structure.svg
Identifiers
CAS number9005-53-2 YesY
Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa)
 N (verify) (what is: YesY/N?)
Infobox references

Lignin or lignen is a complex polymer of aromatic alcohols known as monolignols. It is most commonly derived from wood, and is an integral part of the secondary cell walls of plants[1] and some algae.[2] Lignin was first mentioned in 1813 by the Swiss botanist A. P. de Candolle, who described it as a fibrous, tasteless material, precipitated by acids from wood, insoluble in water and alcohol, but soluble in weak alkaline solutions.[3] He named the substance “lignine”, which is derived from the Latin word lignum,[4] meaning wood. It is one of the most abundant organic polymers on Earth, exceeded only by cellulose. Lignin constitutes 30% of non-fossil organic carbon[5] and a quarter to a third of the dry mass of wood.[citation needed]

As a biopolymer, lignin is unusual because of its heterogeneity and lack of a defined primary structure. Its most commonly noted function is the support through strengthening of wood (xylem cells) in trees.[6][7][8]

Global production of lignin is around 1.1 million metric tons per year and is used in a wide range of low volume, niche applications where the form but not the quality is important.[9]

Biological function[edit]

Lignin fills the spaces in the cell wall between cellulose, hemicellulose, and pectin components, especially in xylem tracheids, vessel elements and sclereid cells. It is covalently linked to hemicellulose and, therefore, crosslinks different plant polysaccharides, conferring mechanical strength to the cell wall and by extension the plant as a whole.[10] It is particularly abundant in compression wood but scarce in tension wood, which are types of reaction wood.

Lignin plays a crucial part in conducting water in plant stems. The polysaccharide components of plant cell walls are highly hydrophilic and thus permeable to water, whereas lignin is more hydrophobic. The crosslinking of polysaccharides by lignin is an obstacle for water absorption to the cell wall. Thus, lignin makes it possible for the plant's vascular tissue to conduct water efficiently.[11] Lignin is present in all vascular plants, but not in bryophytes, supporting the idea that the original function of lignin was restricted to water transport. However, it is present in red algae, which seems to suggest that the common ancestor of plants and red algae also synthesised lignin. This would suggest that its original function was structural; it plays this role in the red alga Calliarthron, where it supports joints between calcified segments.[2] Another possibility is that the lignin in red algae and in plants are result of convergent evolution, and not of a common origin.

Ecological function[edit]

Lignin plays a significant role in the carbon cycle, sequestering atmospheric carbon into the living tissues of woody perennial vegetation. Lignin is one of the most slowly decomposing components of dead vegetation, contributing a major fraction of the material that becomes humus as it decomposes. The resulting soil humus, in general, increases the photosynthetic productivity of plant communities growing on a site as the site transitions from disturbed mineral soil through the stages of ecological succession, by providing increased cation exchange capacity in the soil and expanding the capacity of moisture retention between flood and drought conditions.

Economic significance[edit]

Highly lignified wood is durable and therefore a good raw material for many applications. It is also an excellent fuel, since lignin yields more energy when burned than cellulose. Mechanical, or high-yield pulp used to make newsprint contains most of the lignin originally present in the wood. This lignin is responsible for newsprint's yellowing with age.[4] Lignin must be removed from the pulp before high-quality bleached paper can be manufactured.

In sulfite pulping, lignin is removed from wood pulp as sulfonates. These lignosulfonates have several uses:[12]

The first investigations into commercial use of lignin were reported by Marathon Corporation, a paper company based in Rothschild Wisconsin, starting in 1927. The first class of products that showed promise were leather tanning agents. The lignin chemical business of Marathon was operated for many years as Marathon Chemicals. It is now known as LignoTech USA, Inc., and is owned by the Norwegian company Borregaard.[13]

Lignin removed via the kraft process (sulfate pulping) is usually burned for its fuel value, providing energy to run the mill and its associated processes.

In 1998, a German company, Tecnaro, developed a process for turning lignin into a substance, called Arboform, which behaves identically to plastic for injection molding. Therefore, it can be used in place of plastic for several applications. When the item is discarded, it can be burned just like wood.[14]

In 2007, lignin extracted from shrubby willow was successfully used to produce expanded polyurethane foam.[15]

In 2012, it was shown carbon fiber can be produced from lignin instead of from fossil oil.[16]

In 2013, the Flemish Institute for Biotechnology was supervising a trial of 448 poplar trees genetically engineered to produce less lignin so that they would be more suitable for conversion into bio-fuels.[17]

Structure[edit]

Fig. 1: An example of a possible lignin structure
Fig. 2: A small piece of lignin polymer
Fig. 3: The three common monolignols: paracoumaryl alcohol (1), coniferyl alcohol (2) and sinapyl alcohol (3)
Fig. 4: Polymerisation of coniferyl alcohol to lignin. The reaction has two alternative routes catalysed by two different oxidative enzymes, peroxidases or oxidases.

Lignin is a cross-linked racemic macromolecule with molecular masses in excess of 10,000 u. It is relatively hydrophobic and aromatic in nature. The degree of polymerisation in nature is difficult to measure, since it is fragmented during extraction and the molecule consists of various types of substructures that appear to repeat in a haphazard manner. Different types of lignin have been described depending on the means of isolation.[18]

There are three monolignol monomers, methoxylated to various degrees: p-coumaryl alcohol, coniferyl alcohol, and sinapyl alcohol[19] (Figure 3). These lignols are incorporated into lignin in the form of the phenylpropanoids p-hydroxyphenyl (H), guaiacyl (G), and syringyl (S), respectively.[5] Gymnosperms have a lignin that consists almost entirely of G with small quantities of H. That of dicotyledonous angiosperms is more often than not a mixture of G and S (with very little H), and monocotyledonous lignin is a mixture of all three.[5] Many grasses have mostly G, while some palms have mainly S.[20] All lignins contain small amounts of incomplete or modified monolignols, and other monomers are prominent in non-woody plants.[21]

Thioglycolysis is an analytical technique for lignin quantitation.[22] Lignin structure can also be studied by computational simulation.[23]

Biosynthesis[edit]

Lignin biosynthesis (Figure 4) begins in the cytosol with the synthesis of glycosylated monolignols from the amino acid phenylalanine. These first reactions are shared with the phenylpropanoid pathway. The attached glucose renders them water soluble and less toxic. Once transported through the cell membrane to the apoplast, the glucose is removed and the polymerisation commences.[24] Much about its anabolism is not understood even after more than a century of study.[5]

The polymerisation step, that is a radical-radical coupling, is catalysed by oxidative enzymes. Both peroxidase and laccase enzymes are present in the plant cell walls, and it is not known whether one or both of these groups participates in the polymerisation. Low molecular weight oxidants might also be involved. The oxidative enzyme catalyses the formation of monolignol radicals. These radicals are often said to undergo uncatalyzed coupling to form the lignin polymer, but this hypothesis has been recently challenged.[25] The alternative theory that involves an unspecified biological control is however not widely accepted.

Biodegradation[edit]

Biodegradation of lignin by brown rot, soft rot, or white rot fungi leads to destruction of wood on the forest floor and man-made structures such as fences and wooden buildings. However biodegradation of lignin is a necessary prerequisite for processing biofuel from plant raw materials. Current processing setups show some problematic residuals after processing the digestible or degradable contents. The improving of lignin degradation would drive the output from biofuel processing to better gain or better efficiency factor.

Lignin is indigestible by animal enzymes, but some fungi (such as the Dryad's saddle) and bacteria are able to secrete ligninases (also named lignases) that can biodegrade the polymer. The details of the biodegradation are not yet well understood and the pathways depends on the type of wood decay. The enzymes involved may employ free radicals for depolymerization reactions.[26] Well understood ligninolytic enzymes are manganese peroxidase and lignin peroxidase. Because it is cross-linked with the other cell wall components, lignin minimizes the accessibility of cellulose and hemicellulose to microbial enzymes such as cellobiose dehydrogenase. Hence, in general lignin is associated with reduced digestibility of the overall plant biomass, which helps defend against pathogens and pests.[11]

Lignin degradation is done by micro-organisms like fungi and bacteria. Lignin peroxidase (also "ligninase", EC number 1.14.99) is a hemoprotein from the white-rot fungus Phanerochaete chrysosporium with a variety of lignin-degrading reactions, all dependent on hydrogen peroxide to incorporate molecular oxygen into reaction products. There are also several other microbial enzymes that are believed to be involved in lignin biodegradation, such as manganese peroxidase, laccase.

Lignin-related chemicals can be further processed by bacteria. For instance, the aerobic Gram-negative soil bacterium Sphingomonas paucimobilis is able to degrade lignin-related biphenyl chemical compounds.[27]

Pyrolysis[edit]

Pyrolysis of lignin during the combustion of wood or charcoal production yields a range of products, of which the most characteristic ones are methoxy-substituted phenols. Of those, the most important are guaiacol and syringol and their derivatives; their presence can be used to trace a smoke source to a wood fire. In cooking, lignin in the form of hardwood is an important source of these two chemicals, which impart the characteristic aroma and taste to smoked foods such as barbecue. The main flavor compounds of smoked ham are guaiacol, and its 4-, 5-, and 6-methyl derivatives as well as 2,6-dimethylphenol. These compounds are produced by thermal breakdown of lignin in the wood used in the smokehouse.[28]

Detection[edit]

A solution of hydrochloric acid and phloroglucinol is also used for the detection of lignin (Weisner test). A brilliant red color develops, owing to the presence of coniferaldehyde groups in the lignin.[29]

References[edit]

  1. ^ Lebo, Stuart E. Jr.; Gargulak, Jerry D. and McNally, Timothy J. (2001). "Lignin". Kirk‑Othmer Encyclopedia of Chemical Technology. John Wiley & Sons, Inc. doi:10.1002/0471238961.12090714120914.a01.pub2. Retrieved 2007-10-14. 
  2. ^ a b Martone, Pt; Estevez, Jm; Lu, F; Ruel, K; Denny, Mw; Somerville, C; Ralph, J (Jan 2009). "Discovery of Lignin in Seaweed Reveals Convergent Evolution of Cell-Wall Architecture.". Current biology : CB 19 (2): 169–75. doi:10.1016/j.cub.2008.12.031. ISSN 0960-9822. PMID 19167225. 
  3. ^ de Candolle, M.A.P. (1813). Theorie Elementaire de la Botanique ou Exposition des Principes de la Classification Naturelle et de l’Art de Decrire et d’Etudier les Vegetaux. Paris: Deterville. 
  4. ^ a b E. Sjöström (1993). Wood Chemistry: Fundamentals and Applications. Academic Press. ISBN 0-12-647480-X. 
  5. ^ a b c d W. Boerjan, J. Ralph, M. Baucher (June 2003). "Lignin biosynthesis". Ann. Rev. Plant Biol. 54 (1): 519–549. doi:10.1146/annurev.arplant.54.031902.134938. PMID 14503002. 
  6. ^ (1995, Biology, Arms and Camp ).
  7. ^ Anatomy of Seed Plants, Esau, 1977
  8. ^ Wardrop; The structure of the cell wall in lignified collenchyma of Eryngium sp.; Aust. J. Botany, 17:229-240, 1969
  9. ^ NNFCC Renewable Chemicals Factsheet: Lignin
  10. ^ Chabannes, M.; et al. (2001). "In situ analysis of lignins in transgenic tobacco reveals a differential impact of individual transformations on the spatial patterns of lignin deposition at the cellular and subcellular levels". Plant J. 28 (3): 271–282. doi:10.1046/j.1365-313X.2001.01159.x. PMID 11722770. 
  11. ^ a b K.V. Sarkanen & C.H. Ludwig (eds) (1971). Lignins: Occurrence, Formation, Structure, and Reactions. New York: Wiley Intersci. 
  12. ^ "Uses of lignin from sulfite pulping". Retrieved 2007-09-10. 
  13. ^ "Borregaard LignoTech’s History 1927-2008". 
  14. ^ A greener alternative to plastics: liquid wood from MSNBC
  15. ^ Green plastic produced from biojoule material BioJoule Technologies Press Release, 12 July 2007.
  16. ^ Avancerade lättviktsmaterial från skogen
  17. ^ Hope, Alan (3 April 2013), News in brief: The Bio Safety Council..." Flanders Today, Page 2, Retrieved 27 April 2013
  18. ^ "Lignin and its Properties: Glossary of Lignin Nomenclature". Dialogue/Newsletters Volume 9, Number 1. Lignin Institute. July 2001. Retrieved 2007-10-14. 
  19. ^ K. Freudenberg & A.C. Nash (eds) (1968). Constitution and Biosynthesis of Lignin. Berlin: Springer-Verlag. 
  20. ^ Kuroda K, Ozawa T, Ueno T (April 2001). "Characterization of sago palm (Metroxylon sagu) lignin by analytical pyrolysis". J Agric Food Chem. 49 (4): 1840–7. doi:10.1021/jf001126i. 
  21. ^ J. Ralph, et al. (2001). "Elucidation of new structures in lignins of CAD- and COMT-deficient plants by NMR". Phytochem. 57 (6): 993–1003. doi:10.1016/S0031-9422(01)00109-1. 
  22. ^ Elicitor-Induced Spruce Stress Lignin (Structural Similarity to Early Developmental Lignins). B. M. Lange, C. Lapierre and H. Sandermann Jr, Plant Physiology, July 1995, vol. 108, no. 3, pp. 1277-1287, doi:10.1104/pp.108.3.1277
  23. ^ Glasser, Wolfgang G.; Glasser, Heidemarie R. (1974). "Simulation of Reactions with Lignin by Computer (Simrel). II. A Model for Softwood Lignin". Holzforschung 28 (1): 5–11, 1974. doi:10.1515/hfsg.1974.28.1.5. 
  24. ^ Samuels AL, Rensing KH, Douglas CJ, Mansfield SD, Dharmawardhana DP, Ellis BE (November 2002). "Cellular machinery of wood production: differentiation of secondary xylem in Pinus contorta var. latifolia". Planta 216 (1): 72–82. PMID 12430016. 
  25. ^ Davin, L.B.; Lewis, N.G. (2005). "Lignin primary structures and dirigent sites". Current Opinion in Biotechnology 16 (4): 407–415. doi:10.1016/j.copbio.2005.06.011. PMID 16023847. 
  26. ^ Carlile, Michael J.; Sarah C. Watkinson (1994). The Fungi. Academic Press. ISBN 0-12-159959-0. 
  27. ^ Xue Peng, Takashi Egashira, Kaoru Hanashiro, Eiji Masai, Seiji Nishikawa, Yoshihiro Katayama, Kazuhide Kimbara and Masao Fukuda (1998). "Cloning of a Sphingomonas paucimobilis SYK-6 Gene Encoding a Novel Oxygenase That Cleaves Lignin-Related Biphenyl and Characterization of the Enzyme". Appl Environ Microbiol 64 (7): 2520–2527. PMID 9647824. 
  28. ^ Wittkowski, Reiner; Ruther, Joachim; Drinda, Heike; Rafiei-Taghanaki, Foroozan "Formation of smoke flavor compounds by thermal lignin degradation" ACS Symposium Series (Flavor Precursors), 1992, volume 490, pp 232–243. ISBN 978084121346.
  29. ^ Lignin production and detection in wood. John M. Harkin, U.S. Forest Service Research Note FPL-0148, November 1966 (article)