From Wikipedia, the free encyclopedia - View original article
A laptop is a portable personal computer with a clamshell form factor, suitable for mobile use. They are also sometimes called notebook computers or notebooks. Laptops are commonly used in a variety of settings, including work, education, and personal multimedia.
A laptop combines the components and inputs as a desktop computer; including display, speakers, keyboard, and pointing device (such as a touchpad), into a single device. Most modern-day laptop computers also have a webcam and a mic (microphone) pre-installed. A laptop can be powered either from a rechargeable battery, or by mains electricity via an AC adapter. Laptops are a diverse category of devices, and other more specific terms, such as ultrabooks or netbooks, refer to specialist types of laptop which have been optimized for certain uses. Hardware specifications change vastly between these classifications, forgoing greater and greater degrees of processing power to reduce heat emissions.
Portable computers, originally monochrome CRT-based and developed into the modern laptops, were originally considered to be a small niche market, mostly for specialized field applications such as the military, accountants and sales representatives. As portable computers became smaller, lighter, cheaper, and more powerful and as screens became smaller and of better quality, laptops became very widely used for a variety of purposes.
As the personal computer (PC) became feasible in the 1971, the idea of a portable personal computer followed. A "personal, portable information manipulator" was imagined by Alan Kay at Xerox PARC in 1968, and described in his 1972 paper as the "Dynabook".
As 8-bit CPU machines became widely accepted, the number of portables increased rapidly. The Osborne 1, released in 1981, used the Zilog Z80 and weighed 23.6 pounds (10.7 kg). It had no battery, a 5 in (13 cm) CRT screen, and dual 5.25 in (13.3 cm) single-density floppy drives. In the same year the first laptop-sized portable computer, the Epson HX-20, was announced. The Epson had a LCD screen, a rechargeable battery, and a calculator-size printer in a 1.6 kg (3.5 lb) chassis. Both Tandy/RadioShack and HP also produced portable computers of varying designs during this period.
The first laptops using the flip form factor appeared in the early 1980s. The Dulmont Magnum was released in Australia in 1981–82, but was not marketed internationally until 1984–85. The US$8,150 (US$19,920 today) GRiD Compass 1100, released in 1982, was used at NASA and by the military among others. The Gavilan SC, released in 1983, was the first computer described as a "laptop" by its manufacturer. From 1983 onward, several new input techniques were developed and included in laptops, including the touchpad (Gavilan SC, 1983), the pointing stick (IBM ThinkPad 700, 1992) and handwriting recognition (Linus Write-Top, 1987). Some CPUs, such as the 1990 Intel i386SL, were designed to use minimum power to increase battery life of portable computers, and were supported by dynamic power management features such as Intel SpeedStep and AMD PowerNow! in some designs.
Displays reached VGA resolution by 1988 (Compaq SLT/286), and colour screens started becoming a common upgrade in 1991 with increases in resolution and screen size occurring frequently until the introduction of 17"-screen laptops in 2003. Hard drives started to be used in portables, encouraged by the introduction of 3.5" drives in the late 1980s, and became common in laptops starting with the introduction of 2.5" and smaller drives around 1990; capacities have typically lagged behind physically larger desktop drives. Optical storage, read-only CD-ROM followed by writeable CD and later read-only or writeable DVD and Blu-ray, became common in laptops early in the 2000s.
A desktop-replacement computer is a large laptop which is not intended primarily for mobile use; they are bulkier and not as portable as other laptops, and they are intended for use as compact and transportable alternatives to a desktop computer. They were traditionally intended to provide the approximate capabilities of a desktop computer, with a similar level of performance, but since around 2010 the distinction in performance between mainstream desktop and laptops have disappeared. The distinction lives on in size: desktop replacements are larger and (typically) heavier than other classes of laptops. They are capable of containing more powerful components and have a 15" or larger display.
Their operation time on batteries is typically shorter than other laptops; in rare cases they have no battery at all. In the past, some laptops in this class use a limited range of desktop components to provide better performance for the same price at the expense of battery life, although the practice has largely died out.
Up until the early 2000s, desktops were more powerful, easier to upgrade, and much cheaper than laptops, but in later years laptops have become much cheaper and more powerful than before, and most peripherals are available in laptop-compatible USB versions which minimize the need for internal add-on cards.
The names "Media Center Laptops" and "Gaming Laptops" are used to describe specialized notebook computers, often overlapping with the desktop replacement form factor.
A subnotebook or ultraportable is a laptop designed and marketed with an emphasis on portability (small size, low weight and often longer battery life). Subnotebooks are usually smaller and lighter than standard laptops, weighing between 0.8 and 2 kg (2 to 5 pounds); the battery life can exceed 10 hours. Since the introduction of netbooks and ultrabooks, the line between subnotebooks and either category has been blurry; netbooks are in essence a cheap subcategory of subnotebooks, and while some ultrabooks have a screen size too large to qualify as a subnotebook, most ultrabooks are also subnotebooks..
To achieve the size and weight reductions, ultraportables use 13" and smaller screens (down to 6.4") Most subnotebooks achieve a further portability improvement by omitting an optical/removable media drive. In the past, they often had relatively few ports but with the move to standardize on USB and HDMI this distinction has largely vanished.
Similarly, in the past they often employed expensive components designed for minimal size and best power efficiency, and utilized advanced materials and construction methods, but over the past several years these techniques and parts have become mainstream and there is often little distinction besides screen size.
The term "subnotebook" is generally reserved to laptops that run general-purpose desktop operating systems such as Windows, Linux or Mac OS X, rather than a mobile-device-specific OS such as Windows CE, iOS, Palm OS or Android (although in a few cases devices marketed as laptops have used those operating systems). At present, two cases, Windows RT and the Chrome OS, tend to blur the branding; there is little to distinguish the smaller ChromeBook models from any reasonable general definition of subnotebooks.
At Computex 2011 Intel announced a new class for ultraportables called Ultrabooks. The term is used to describe a highly portable laptop that has strict limits for size, weight, battery life, and have tablet-like features such as instant on functionality. Intel estimates that by the end of 2012, 40 percent of the consumer laptop market segment will be Ultrabooks. Since then, the term has entered general parlance for thin-and-light notebooks, regardless of whether they can legally be sold as "Ultrabooks" under the trademark.
Netbooks are a market segment of laptops that are inexpensive, light-weight, economical, energy-efficient and especially suited for wireless communication and Internet access. Hence the name netbook (as "the device excels in web-based computing performance"). The term came to prominence in the late 2000s, and is largely obsolete as of 2013, although a few of the least powerful lightweight notebooks retain that branding.
With primary focus given to web browsing and e-mailing, netbooks are intended to "rely heavily on the Internet for remote access to web-based applications" and are targeted increasingly at cloud computing users who rely on servers and require a less powerful client computer. A common distinguishing feature is the lack of optical disk (i.e. CD, DVD or Blu-ray) drives. While the devices range in size from below 5 inches to over 12 inches, most are between 9 and 11 inches (280 mm) and weigh between 0.9–1.4 kg (2–3 pounds).
Netbooks had a few disadvantages. In order to limit weight and cost, the first products introduced to the market utilized very small early-generation solid-state drives for internal storage instead of traditional hard disks, lowering storage space tremendously—typical sizes were between 8gb-16gb at a time when typical low end laptop hard drives were 120-160gb—and unlike modern solid state drives, offered little to no performance benefit over rotational disk. Hard disk drive technology and form factors have since been adapted to fit into netbooks providing more hard drive space without much increase cost, a key point of a netbook. Another issue with netbooks is expansion. In order to produce small, inexpensive laptops, netbooks generally lack significant upgrade ability, and the Atom processors used in most netbooks tend to have their own limits.
A majority of netbooks only have a single memory slot and will not recognize any amount beyond 2 GB of RAM. This limits the capabilities of the netbook beyond basic functionality (internet, e-mail, etc.). Finally because of their size and cost compared to typical subnotebooks, netbooks almost always have a slower CPU
The big breakthrough for netbook computers did not happen until the weight, diagonal form-factor and price combination of < 1 kg, < 9", < U.S. $400, respectively, became commercially available in around 2008.
In 2009, Google announced an operating system called Google Chrome OS for this market and in 2011 the Google Chromebook was released running on the Google Chrome OS; Google has never advertised the Chromebook machines as a netbook, because it is an evolution of the concept into a new class of device since it is used primarily while connected to the Internet.
A rugged/ruggedized laptop is designed to reliably operate in harsh usage conditions such as strong vibrations, extreme temperatures, and wet or dusty environments. Rugged laptops are usually designed from scratch, rather than adapted from regular consumer laptop models. Rugged laptops are bulkier, heavier, and much more expensive than regular laptops, and thus are seldom seen in regular consumer use.
The design features found in rugged laptops include rubber sheeting under the keyboard keys, sealed port and connector covers, passive cooling, superbright displays easily readable in daylight, cases and frames made of magnesium alloys that are much stronger than plastic found in commercial laptops, and solid-state storage devices or hard disc drives that are shock mounted to withstand constant vibrations. Rugged laptops are commonly used by public safety services (police, fire and medical emergency), military, utilities, field service technicians, construction, mining and oil drilling personnel. Rugged laptops are usually sold to organizations, rather than individuals, and are rarely marketed via retail channels.
Typical modern convertible laptops have a complex joint between the keyboard housing and the display permitting the display panel to swivel and then lie flat on the keyboard housing. Tablet laptops also contain touchscreen displays alongside the traditional touchpad.
Typically, the base of a tablet laptop attaches to the display at a single joint called a swivel hinge or rotating hinge. The joint allows the screen to rotate through 180° and fold down on top of the keyboard to provide a flat writing surface. This design, although the most common, creates a physical point of weakness on the laptop.
Some manufacturers have attempted to overcome these weak points by adopting innovative methods such as a sliding design in which the screen slides up from the slate-like position and locks into place to provide the laptop mode. Newer iterations of tablet laptops are of hybrid design. Hybrid tablets incorporate a removable keyboard base allowing the user to easily choose between functioning as a laptop with the keyboard attached or as a slate device utilizing the touchscreen alone.
A variant of notebook has 2 screens, inner screen is usual as notebook and the outer screen (back to back with inner screen) can be used as tablet which can be a mirror from inner screen or even both can run different applications together.
The basic components of laptops function identically to their desktop counterparts; traditionally they were miniaturized and adapted to mobile use, although as of the present decade (2010-) an increasing number of desktop systems use the same smaller, lower-power parts which originally evolved for mobile use. The design bounds on power, size, and cooling of laptops limit the maximum performance of laptop parts compared to that of desktop components, although that difference has increasingly narrowed over recent years.
The following list summarizes the differences and distinguishing features of laptop components in comparison to desktop personal computer parts:
There have been a wide range of CPUs designed for laptops available from both Intel, AMD and other manufacturers. On non-x86 architectures, Motorola and IBM produced the chips for the former PowerPC-based Apple laptops (iBook and PowerBook). Many laptops have removable CPUs, although this has become less common in the past few years as the trend has been to increasingly thin and light models. In other laptops the CPU is soldered on the motherboard and is non-replaceable; this is nearly universal in ultrabooks, for example.
In the past, some laptops have used a desktop processor instead of the laptop version and have high performance gains at the cost of greater weight, heat, and limited battery life. The practice is largely extinct as of 2013.
A docking station (sometimes referred to simply as a "dock") is a laptop accessory that contains multiple ports, and in some cases also expansion slots and/or bays for fixed or removable drives. A laptop connects and disconnects easily to a docking station, typically through a single large proprietary connector; in the past it was distinguished from a port replicator—a simplified docking station that only provides connections from the laptop to input/output ports—although as of 2013 the terms are generally used interchangeably, and the traditional docs with PCI or PCI-E slots are vanishingly rare. Both docking stations and port replicators are intended to be used at a permanent working place (a desk) to offer instant connection to multiple input/output devices and to extend a laptop's capabilities.
Docking stations became a common laptop accessory in the early 1990s. The most common use was in a corporate computing environment where the company had standardized on a common network card and this same card was placed into the docking station. These stations were very large and quite expensive. As the need for additional storage and expansion slots became less critical because of the high integration inside the laptop, port replicators have gained popularity, being a cheaper, often passive device that often simply mates to the connectors on the back of the notebook, or connects via a standardized port such as USB or FireWire.
Laptop charging trolleys, also known as laptop trolleys or laptop carts, are mobile storage containers to charge laptops, netbooks and tablet computers all together. The trolleys are predominantly used in schools that have replaced their traditional static ICT suites of desktop computers with laptops, but do not have enough plug sockets in their buildings to charge all of the devices.
The trolleys can be wheeled between rooms and classrooms so that anyone in a particular building can access fully charged IT equipment. Laptop charging trolleys are also used to deter and protect against opportunistic and organized theft. Schools, especially those with open plan designs, are often prime targets for thieves and laptops, netbooks and tablets can easily be concealed and removed from buildings. Laptop charging trolleys were designed and constructed to protect against theft. They are generally made out of steel, and the laptops remain locked up while not in use. Although the trolleys can be moved between areas in buildings, they can often also be mounted to the floor or walls to prevent thieves walking off with investments, especially overnight.
In some laptops, solar panels are able to generate enough solar power for the laptop to operate. The One Laptop Per Child Initiative released the OLPC XO-1 laptop which was tested and successfully operated by use of solar panels. Presently, they are designing a OLPC XO-3 laptop with these features. The OLPC XO-3 can operate with 2 Watts of electricity because its renewable energy resources generate a total of 4 Watts. Samsung has also designed a NC215S Solar powered notebook that will be sold commercially in the US market.
In general, components other than the categories listed above are not intended to be replaceable; a few, such as processors, follow their own standards but are difficult to replace because of other factors (for example, in the case of processors cooling and access limitations can make upgrades very difficult or impossible.)
In particular, motherboards are almost always make and model-specific: locations of ports, and design and placement of internal components are not standard. Those parts are neither interchangeable with parts from other manufacturers (replaceable) nor upgradeable. If broken or damaged, they must be substituted with an exact replacement part. Those users uneducated in the relevant fields are those the most affected by incompatibilities, especially if they attempt to connect their laptops with incompatible hardware or power adapters.
Intel, Asus, Compal, Quanta and some other laptop manufacturers have created the Common Building Block standard for laptop parts to address some of the inefficiencies caused by the lack of standards.
Portability is usually the first feature mentioned in any comparison of laptops versus desktop PCs. Physical portability allows that a laptop can be used in many places— not only at home and at the office, but also during commuting and flights, in coffee shops, in lecture halls and libraries, at clients' location or at a meeting room, etc. The portability feature offers several distinct advantages:
Other advantages of laptops:
Compared to desktop PCs, laptops have disadvantages in the following areas:
While the performance of mainstream desktops and laptop is comparable, and the cost of laptops has fallen less rapidly than desktops, laptops remain more expensive than desktop PCs at the same performance level. The upper limits of performance of laptops remain much lower than the highest-end desktops (especially "workstation class" machines with two processor sockets), and "bleeding-edge" features usually appear first in desktops and only then, as the underlying technology matures, are adapted to laptops.
For Internet browsing and typical office applications, where the computer spends the majority of its time waiting for the next user input, even relatively low-end laptops (such as Netbooks) can be fast enough for some users. As of mid-2010, at the lowest end, the cheapest netbooks—between US$200–300—remain more expensive than the lowest-end desktop computers (around US$200) only when those are priced without a screen/monitor. Once an inexpensive monitor is added, the prices are comparable.
Most higher-end laptops are sufficiently powerful for high-resolution movie playback, some 3D gaming and video editing and encoding. However, laptop processors can be disadvantaged when dealing with higher-end database, maths, engineering, financial software, virtualization, etc. Also, the top-of-the-line mobile graphics processors (GPUs) are significantly behind the top-of-the-line desktop GPUs to a greater degree than the processors, which limits the utility of laptops for high-end 3D gaming and scientific visualization applications.
Some manufacturers work around this performance problem by using desktop CPUs for laptops.
Upgradeability of laptops is very limited compared to desktops, which are thoroughly standardized. In general, hard drives and memory can be upgraded easily. Optical drives and internal expansion cards may be upgraded if they follow an industry standard, but all other internal components, including the motherboard, CPU and graphics, are not always intended to be upgradeable. Intel, Asus, Compal, Quanta and some other laptop manufacturers have created the Common Building Block standard for laptop parts to address some of the inefficiencies caused by the lack of standards.
The reasons for limited upgradeability are both technical and economic. There is no industry-wide standard form factor for laptops; each major laptop manufacturer pursues its own proprietary design and construction, with the result that laptops are difficult to upgrade and have high repair costs. With few exceptions, laptop components can rarely be swapped between laptops of competing manufacturers, or even between laptops from the different product-lines of the same manufacturer.
Some upgrades can be performed by adding external devices, either USB or in expansion card format such as PC Card. Devices such as sound cards, network adapters, hard and optical drives, and numerous other peripherals are available, but these upgrades usually impair the laptop's portability, because they add cables and boxes to the setup and often have to be disconnected and reconnected when the laptop is on the move.
Because of their small and flat keyboard and trackpad pointing devices, prolonged use of laptops can cause repetitive strain injury. Usage of separate, external ergonomic keyboards and pointing devices is recommended to prevent injury when working for long periods of time; they can be connected to a laptop easily by USB or via a docking station. Some health standards require ergonomic keyboards at workplaces.
The integrated screen often requires users to lean over for a better view, which can cause neck and/or spinal injuries. A larger and higher-quality external screen can be connected to almost any laptop to alleviate that and to provide additional screen space for more productive work. Another solution is to use a computer stand.
For anyone not buying a new screen, a simple method to reduce risk of spinal injury is to position the laptop's screen in a manner that an obtuse angle (more than 90 degrees open) is formed. It is then possible for the neck to remain straight during use of the device.
A study by State University of New York researchers found that heat generated from laptops can increase the temperature of the lap of male users when balancing the computer on their lap, potentially putting sperm count at risk. The study, which included roughly two dozen men between the ages of 21 and 35, found that the sitting position required to balance a laptop can increase scrotum temperature by as much as 2.1 °C (3.78 °F). However, further research is needed to determine whether this directly affects male sterility.
A 2010 study of 29 males published in Fertility and Sterility found that men who kept their laptops on their laps experienced scrotal hyperthermia (overheating) in which their scrotal temperatures increased by up to 2 °C. The resulting heat increase, which could not be offset by a laptop cushion, may increase male infertility.
A common practical solution to this problem is to place the laptop on a table or desk, or to use a book or pillow between the body and the laptop. Another solution is to obtain a cooling unit for the laptop. These are usually USB powered and consist of a hard thin plastic case housing one, two or three cooling fans – with the entire assembly designed to sit under the laptop in question – which results in the laptop remaining cool to the touch, and greatly reduces laptop heat buildup.
Because of their portability, laptops are subject to more wear and physical damage than desktops. Components such as screen hinges, latches, power jacks and power cords deteriorate gradually from ordinary use. A liquid spill onto the keyboard, a rather minor mishap with a desktop system, can damage the internals of a laptop and result in a costly repair. One study found that a laptop is three times more likely to break during the first year of use than a desktop.
In order to help maintain a laptop, it is recommended to clean a laptop every three months for dirt, debris, dust, and food particles. Most cleaning kits consist of a lint-free or Microfiber cloth for the LCD screen and keyboard, compressed air for getting dust out of the fan, and cleaning solution. It is also important to never use harsh chemicals such as bleach as they can cause damage to your laptop.
Original external components are expensive, and usually proprietary and non-interchangeable; other parts are inexpensive—a power jack can cost a few dollars—but their replacement may require extensive disassembly and reassembly of the laptop by a technician. Other inexpensive but fragile parts often cannot be purchased separate from larger more expensive components. The repair costs of a failed motherboard or LCD panel often exceed the value of a used laptop.
Laptops rely on extremely compact cooling systems involving a fan and heat sink that can fail from blockage caused by accumulated airborne dust and debris. Most laptops do not have any type of removable dust collection filter over the air intake for these cooling systems, resulting in a system that gradually causes it to conduct more heat and noise as the years pass. In some cases the laptop starts to overheat even at idle load levels. This dust is usually stuck inside, where the fan and heat sink meet, where casual cleaning and vacuuming cannot remove it. Compressed air can dislodge the dust and debris but may not always remove it; after the device is turned on, the loose debris builds back up the cooling system by the fans. A complete dis-assembly is usually required to clean the laptop. Many laptops are difficult to disassemble by the normal user and contain components that are sensitive to electrostatic discharge (ESD).
Battery life is limited because the capacity drops with time, eventually requiring replacement after as little as a year. A new battery typically stores enough energy to run the laptop for three to five hours, depending on usage, configuration, and power management settings. Yet, as it ages, the battery's energy storage will dissipate progressively until it lasts only a few minutes. The battery is often easily replaceable and a higher capacity model may be obtained for longer life. Some laptops (specifically ultrabooks) do not have the usual removable battery and have to be brought to the service center of its manufacturer to have its battery replaced. Replacement batteries can also be expensive.
Because they are valuable, common, and portable, laptops are prized targets for theft. Every day, over 1,600 laptops go missing from U.S. airports. The cost of stolen business or personal data, and of the resulting problems (identity theft, credit card fraud, breach of privacy), can be many times the value of the stolen laptop itself. Consequently, physical protection of laptops and the safeguarding of data contained on them are both of great importance.
Most laptops have a Kensington security slot, which can be used to tether them to a desk or other immovable object with a security cable and lock. In addition, modern operating systems and third-party software offer disk encryption functionality, which renders the data on the laptop's hard drive unreadable without a key or a pass phrase. Some laptops also now have additional security elements added by the consumer, including eye recognition software and fingerprint scanning components. Software such as LoJack for Laptops, Laptop Cop, and GadgetTrack have been engineered to help victims locate and recover a laptop in the event of theft.
In Robbins v. Lower Merion School District (Eastern District of Pennsylvania 2010), school-issued laptops loaded with special software afforded two high schools with the capability to take secret webcam shots of their students at home, via their students' laptops.
Laptop theft is a serious problem, with less than 5% of lost or stolen laptops ever recovered by the companies that own them. However, that number may decrease due to a variety of companies and software solutions specializing in laptop recovery. For example, LoJack for Laptops is security software that includes an Investigations and Theft Recovery Team made up of ex law enforcement officers who locate and recover stolen laptops. The service utilizes persistent technology, which means it can't be removed or disabled by a thief. LoJack can only work to track down a missing laptop when it is turned on and it is connected to the Internet. The owner can also remotely delete files or lock their device, so no one can access their personal data.
|Major laptop brands|
|Acer / Gateway / eMachines / Packard Bell: TravelMate, Extensa, Ferrari and Aspire; Packard Bell Easynote; Chromebook|
|Apple: MacBook Air and MacBook Pro|
|Asus: Asus Eee, Lamborghini, Asus ROG|
|Dell: Alienware, Inspiron, Latitude, Precision, Studio, Vostro and XPS|
|Falcon Northwest: DRX, TLX, I / O|
|HCL (India): ME Laptop, ME Netbook, Leaptop and MiLeap|
|Hewlett-Packard / Compaq: HP Pavilion, HP Envy, HP ProBook, HP EliteBook, Compaq Presario|
|Lenovo: ThinkPad, IdeaPad, and the Essential B and G Series|
|Medion: Akoya (OEM version of MSI Wind)|
|MSI: E, C, P, G, V, A, X, U series and Wind Netbook|
|Panasonic: Toughbook, Satellite, Let's Note (Japan only)|
|Samsung: SENS: N, P, Q, R and X series; Chromebook, ATIV Book|
|TG Sambo (Korea): Averatec, Averatec Buddy|
|Toshiba: Dynabook, Portege, Tecra, Satellite, Qosmio, Libretto|
There are a multitude of laptop brands and manufacturers; several major brands, offering notebooks in various classes, are listed in the box to the right.
The major brands usually offer good service and support, including well-executed documentation and driver downloads that will remain available for many years after a particular laptop model is no longer produced. Capitalizing on service, support and brand image, laptops from major brands are more expensive than laptops by smaller brands and ODMs.
Many brands, including the major ones, do not design and do not manufacture their laptops. Instead, a small number of Original Design Manufacturers (ODMs) design new models of laptops, and the brands choose the models to be included in their lineup. In 2006, 7 major ODMs manufactured 7 of every 10 laptops in the world, with the largest one (Quanta Computer) having 30% of world market share. Therefore, there often are identical models available both from a major label and from a low-profile ODM in-house brand.
Battery-powered portable computers had just 2% worldwide market share in 1986. However, laptops have become increasingly popular, both for business and personal use. Around 109 million notebook PCs shipped worldwide in 2007, a growth of 33% compared to 2006. In 2008 it was estimated that 145.9 million notebooks were sold, and that the number would grow in 2009 to 177.7 million. The third quarter of 2008 was the first time when worldwide notebook PC shipments exceeded desktops, with 38.6 million units versus 38.5 million units.
May 2005 is the first time notebooks have outsold desktops in the US over the course of a full month; at the time notebooks sold for an average of $1,131 while desktops sold for an average of $696.
When looking at operating systems, for Microsoft Windows laptops the average selling price (ASP) showed a decline in 2008/2009, possibly due to low-cost netbooks, drawing US$689 at U.S. retail in August 2008. In 2009, ASP had further fallen to $602 by January and to $560 in February. While Windows machines ASP fell $129 in these seven months, Apple (Mac) OS X laptop ASP declined just $12 from $1,524 to $1,512.
The ruggedized Grid Compass computer was used since the early days of the Space Shuttle program. The first commercial laptop used in space was a Macintosh portable in 1991 aboard Space Shuttle mission STS-43. Mac and other laptop computers continue to be flown aboard manned spaceflights though the only long duration flight certified computer for the International Space Station is the ThinkPad. As of 2011 over 100 ThinkPads were aboard the ISS. Laptops used aboard the International Space Station and other spaceflights are generally the same ones that can be purchased by the general public but needed modifications are made to allow them to be used safely and effectively in a weightless environment such as updating the cooling systems to function without relying on hot air rising and accommodation for the lower cabin air pressure.
Laptops operating in harsh usage environments and conditions, such as strong vibrations, extreme temperatures and wet or dusty conditions differ from those used in space in that they are custom designed for the task and do not use commercial off-the-shelf hardware.
A common accessory for laptops is a laptop sleeve, laptop skin or laptop case, which provides a degree of protection from drops or impacts. Sleeves, which are distinguished by being relatively thin and flexible, are most commonly made of neoprene, with sturdier ones made of LRPu (low-resilience polyurethane), with some wrapped in ballistic nylon to provide some measure of waterproofing. Bulkier and sturdier cases can be made of metal with polyurethane padding inside, and may have locks, for added security.
Another common accessory is a laptop cooler. This device helps lower the internal temperature of the laptop by using either active or passive methods. A general active method is plugging a laptop cooler into the laptop and using fans to draw heat away from the laptop. A common passive method is just propping the laptop up on some type of pad so it can receive more air flow.
Features that certain early models of laptops used to have but not available anymore in most recent models of laptops include:
|Wikimedia Commons has media related to Laptops.|