Frasca International

From Wikipedia, the free encyclopedia - View original article

Frasca International, Inc.
TypePrivate
IndustryFlight Simulation
FoundedChampaign, IL (1958)
Headquarters

Champaign, IL (1958-1990)

Urbana, IL (1990-Present)
Key peopleJohn Frasca - CEO and president
Rudy Frasca - Founder and former President[1]
ProductsFlight Training Devices, Full Flight Simulators, Aviation Training Devices
EmployeesApproximately 185[2]
Websitehttp://www.frasca.com/
 
  (Redirected from Frasca)
Jump to: navigation, search
"Frasca" redirects here. For other uses, see Frasca (disambiguation).
Frasca International, Inc.
TypePrivate
IndustryFlight Simulation
FoundedChampaign, IL (1958)
Headquarters

Champaign, IL (1958-1990)

Urbana, IL (1990-Present)
Key peopleJohn Frasca - CEO and president
Rudy Frasca - Founder and former President[1]
ProductsFlight Training Devices, Full Flight Simulators, Aviation Training Devices
EmployeesApproximately 185[2]
Websitehttp://www.frasca.com/

Frasca International, Inc., is a United States manufacturer of flight simulation training devices, with over 2200 training devices delivered in approximately 80 countries throughout the world.[3] Now based in Urbana, Illinois, Frasca International was founded in Champaign, IL in 1958 by current president Rudy Frasca. Frasca manufactured training devices are used in all segments of the aviation industry, but are perhaps best known for their extensive use in many prominent college aviation programs, including Purdue University, Indiana State University, Embry-Riddle Aeronautical University, University of North Dakota, Louisiana Tech University, University of Illinois, and Western Michigan University.

History[edit]

In 1949, Rudy Frasca joined the United States Navy, where he first experienced flight simulation as a Link Trainer instructor. Following his service, and a period of research at the University of Illinois Institute of Aviation, Frasca founded Frasca Aviation (later renamed to Frasca International) in 1958.[4] All early Frasca training devices used mechanical computers exclusively. After working out of various locations for several years (including his home garage), Frasca established a permanent manufacturing plant in downtown Champaign, IL.

In the late 1970s, Frasca devices were converted to use analog electronic computers, allowing for devices that were more simple and cost-effective to manufacture, operate, and maintain. The electronic transition began a period of rapid technological development, culminating in the transition to a digital, PC-based simulation architecture in 1983.[3]

In 1990, in order to support steadily increasing demand, Frasca International again relocated to a 70,000-square-foot (6,500 m2) office building and manufacturing facility in Urbana, Illinois, adjacent to Frasca Field.[4] The new facility provided a substantial increase in manufacturing capacity, and allowed for the production of the company's first Full Flight Simulator (FFS) a short time after moving to the new location.

Throughout the 1990s and early 2000s (decade), Frasca continued to expand its product line, providing training devices for all types of aircraft, both fixed-wing and rotary-wing, and in 2003, Frasca manufactured a Level B Cessna 208B Grand Caravan FFS, followed by a Level C Beechcraft B200 King Air FFS in 2005.[3]

In the mid-2000s (decade), helicopters began to play an increasingly prominent role in the Frasca line-up, with the first Level 6 helicopter Flight Training Device (FTD) delivered in 2007.[3] Subsequently, two more helicopter FTDs (a Eurocopter EC135 and a Eurocopter AS350) were qualified Level 6 in 2008, followed by another EC135 qualified as a JAA Level 3 FTD by the FCAA.[5] The Level 6 EC135, along with a Frasca Bell 206 FTD, were the first Level 6 helicopter FTDs qualified under 14 CFR Part 60.

Most recently, Frasca has partnered with FlightSafety International to produce and qualify the first Level 7 FTD in August 2009.[6] Frasca provided the hardware, flight and systems models, and instructor station, which were integrated to the FlightSafety Vital X image generator and 8 channel visual. Similar Level 7 Bell 206 and Bell 407 devices are currently under production.[7]

Product line[edit]

Frasca currently manufactures a complete line of training devices including CPTs (Cockpit Procedure Trainers), ATDs (Aviation Training Devices), FNPTs (Flight and Navigation Procedures Trainers), FTDs (Flight Training Devices), and FFS (Full Flight Simulators). Simulated aircraft range from small single-engine training airplanes, such as the Cessna 172 to large transport category airplanes, such as the Boeing 737.

The helicopter line covers models from the small Robinson helicopters to medical transports, such as the Bell 407 and Eurocopter EC135, to large passenger transport helicopters, such as the Sikorsky S-92 and Eurocopter EC225.[5]

CRJ-200 AATD, first delivered to Central Washington University.

Customers[edit]

Frasca training devices are used world wide by operators in a variety of sectors, including general aviation, business aviation, airline transport, medical, and military.

Notable commercial customers include Bell Helicopter, Era Training Center, and Delta Connection.[8]

Notable colleges and universities that use Frasca products include Indiana State University, Central Washington University, Western Michigan University, University of North Dakota, Louisiana Tech University, University of Illinois, and Embry-Riddle Aeronautical University.

Embry-Riddle Aeronautical University uses a variety of Frasca simulators for its training, including Cessna 172s, and Diamond DA 42 models. Embry-Riddle's first two Level 6 DA-42 Flight Training Devices were qualified Level 6 in March 2008.[9]

Awards and recognitions[edit]

Several awards and recognitions have been received by both Rudy Frasca and Frasca International.

References[edit]

External links[edit]