From Wikipedia, the free encyclopedia  View original article
A fraction (from Latin: fractus, "broken") represents a part of a whole or, more generally, any number of equal parts. When spoken in everyday English, a fraction describes how many parts of a certain size there are, for example, onehalf, eightfifths, threequarters. A common, vulgar, or simple fraction (examples: and 17/3) consists of an integer numerator, displayed above a line (or before a slash), and a nonzero integer denominator, displayed below (or after) that line. Numerators and denominators are also used in fractions that are not common, including compound fractions, complex fractions, and mixed numerals.
The numerator represents a number of equal parts, and the denominator, which cannot be zero, indicates how many of those parts make up a unit or a whole. For example, in the fraction 3/4, the numerator, 3, tells us that the fraction represents 3 equal parts, and the denominator, 4, tells us that 4 parts make up a whole. The picture to the right illustrates or 3/4 of a cake.
Fractional numbers can also be written without using explicit numerators or denominators, by using decimals, percent signs, or negative exponents (as in 0.01, 1%, and 10^{−2} respectively, all of which are equivalent to 1/100). An integer such as the number 7 can be thought of as having an implicit denominator of one: 7 equals 7/1.
Other uses for fractions are to represent ratios and to represent division.^{[1]} Thus the fraction 3/4 is also used to represent the ratio 3:4 (the ratio of the part to the whole) and the division 3 ÷ 4 (three divided by four).
In mathematics the set of all numbers which can be expressed in the form a/b, where a and b are integers and b is not zero, is called the set of rational numbers and is represented by the symbol Q, which stands for quotient. The test for a number being a rational number is that it can be written in that form (i.e., as a common fraction). However, the word fraction is also used to describe mathematical expressions that are not rational numbers, for example algebraic fractions (quotients of algebraic expressions), and expressions that contain irrational numbers, such as √2/2 (see square root of 2) and π/4 (see proof that π is irrational).
When reading fractions it is customary in English to pronounce the denominator using the corresponding ordinal number, in plural if the numerator is not one, as in "fifths" for fractions with a 5 in the denominator. Thus, 3/5 is rendered as three fifths and 5/32 as five thirtyseconds. This generally applies to whole number denominators greater than 2, though large denominators that are not powers of ten are often rendered using the cardinal number. Thus, 5/123 might be rendered as "five onehundredtwentythirds", but is often "five over one hundred twentythree". In contrast, because one million is a power of ten, 6/1,000,000 is usually expressed as "six millionths" or "six onemillionths", rather than as "six over one million".
The denominators 1, 2, and 4 are special cases. The fraction 3/1 may be spoken of as three wholes. The denominator 2 is expressed as half (plural halves); "−^{3}⁄_{2}" is minus threehalves or negative threehalves. The fraction 3/4 may be either "three fourths" or "three quarters". Furthermore, since most fractions in prose function as adjectives, the fractional modifier is hyphenated. This is evident in standard prose in which one might write about "every twotenths of a mile", "the quartermile run", or the ThreeFifths Compromise. When the fraction's numerator is 1, then the word one may be omitted, such as "every tenth of a second" or "during the final quarter of the year".
In the examples 2/5 and 7/3, the slanting line is called a solidus or forward slash. In the examples and , the horizontal line is called a vinculum or, informally, a "fraction bar". When the solidus is encountered in a fraction, a speaker will sometimes parse it by pronouncing it over as in the examples above.
A simple fraction (also known as a common fraction or vulgar fraction) is a rational number written as a/b or , where a and b are both integers.^{[2]} As with other fractions, the denominator (b) cannot be zero. Examples include , , , , and 3/17. Simple fractions can be positive or negative, proper, or improper (see below). Compound fractions, complex fractions, mixed numerals, and decimals (see below) are not simple fractions, though, unless irrational, they can be evaluated to a simple fraction.
Common fractions can be classified as either proper or improper. When the numerator and the denominator are both positive, the fraction is called proper if the numerator is less than the denominator, and improper otherwise.^{[3]}^{[4]} In general, a common fraction is said to be a proper fraction if the absolute value of the fraction is strictly less than one—that is, if the fraction is greater than −1 and less than 1.^{[5]}^{[6]} It is said to be an improper fraction, or sometimes topheavy fraction,^{[7]} if the absolute value of the fraction is greater than or equal to 1. Examples of proper fractions are 2/3, 3/4, and 4/9; examples of improper fractions are 9/4, 4/3, and 3/3.
A mixed numeral (often called a mixed number, also called a mixed fraction) is the sum of a nonzero integer and a proper fraction. This sum is implied without the use of any visible operator such as "+". For example, in referring to two entire cakes and three quarters of another cake, the whole and fractional parts of the number are written next to each other: .
This is not to be confused with the algebra rule of implied multiplication. When two algebraic expressions are written next to each other, the operation of multiplication is said to be "understood". In algebra, for example is not a mixed number. Instead, multiplication is understood where .
To avoid confusion, the multiplication is often explicitly expressed. So may be written as
,
, or
.
An improper fraction is another way to write a whole plus a part. A mixed number can be converted to an improper fraction as follows:
Similarly, an improper fraction can be converted to a mixed number as follows:
Mixed numbers can also be negative, as in , which equals .
A ratio is a relationship between two or more numbers that can be sometimes expressed as a fraction. Typically, a number of items are grouped and compared in a ratio, specifying numerically the relationship between each group. Ratios are expressed as "group 1 to group 2 ... to group n". For example, if a car lot had 12 vehicles, of which
then the ratio of red to white to yellow cars is 6 to 2 to 4. The ratio of yellow cars to white cars is 4 to 2 and may be expressed as 4:2 or 2:1.
A ratio is often converted to a fraction when it is expressed as a ratio to the whole. In the above example, the ratio of yellow cars to all the cars on the lot is 4:12 or 1:3. We can convert these ratios to a fraction and say that 4/12 of the cars or 1/3 of the cars in the lot are yellow. Therefore, if a person randomly chose one car on the lot, then there is a one in three chance or probability that it would be yellow.
The reciprocal of a fraction is another fraction with the numerator and denominator exchanged. The reciprocal of , for instance, is . The product of a fraction and its reciprocal is 1, hence the reciprocal is the multiplicative inverse of a fraction. Any integer can be written as a fraction with the number one as denominator. For example, 17 can be written as , where 1 is sometimes referred to as the invisible denominator. Therefore, every fraction or integer except for zero has a reciprocal. The reciprocal of 17 is .
In a complex fraction, either the numerator, or the denominator, or both, is a fraction or a mixed number,^{[8]}^{[9]} corresponding to division of fractions. For example, and are complex fractions. To reduce a complex fraction to a simple fraction, treat the longest fraction line as representing division. For example:
If, in a complex fraction, there is no clear way to tell which fraction lines takes precedence, then the expression is improperly formed, and ambiguous. Thus 5/10/20/40 is a poorly constructed mathematical expression, with multiple possible values.
A compound fraction is a fraction of a fraction, or any number of fractions connected with the word of,^{[8]}^{[9]} corresponding to multiplication of fractions. To reduce a compound fraction to a simple fraction, just carry out the multiplication (see the section on multiplication). For example, of is a compound fraction, corresponding to . The terms compound fraction and complex fraction are closely related and sometimes one is used as a synonym for the other.
A decimal fraction is a fraction whose denominator is not given explicitly, but is understood to be an integer power of ten. Decimal fractions are commonly expressed using decimal notation in which the implied denominator is determined by the number of digits to the right of a decimal separator, the appearance of which (e.g., a period, a raised period (•), a comma) depends on the locale (for examples, see decimal separator). Thus for 0.75 the numerator is 75 and the implied denominator is 10 to the second power, viz. 100, because there are two digits to the right of the decimal separator. In decimal numbers greater than 1 (such as 3.75), the fractional part of the number is expressed by the digits to the right of the decimal (with a value of 0.75 in this case). 3.75 can be written either as an improper fraction, 375/100, or as a mixed number, .
Decimal fractions can also be expressed using scientific notation with negative exponents, such as 6.023×10^{−7}, which represents 0.0000006023. The 10^{−7} represents a denominator of 10^{7}. Dividing by 10^{7} moves the decimal point 7 places to the left.
Decimal fractions with infinitely many digits to the right of the decimal separator represent an infinite series. For example, 1/3 = 0.333... represents the infinite series 3/10 + 3/100 + 3/1000 + ... .
Another kind of fraction is the percentage (Latin per centum meaning "per hundred", represented by the symbol %), in which the implied denominator is always 100. Thus, 51% means 51/100. Percentages greater than 100 or less than zero are treated in the same way, e.g. 311% equals 311/100, and −27% equals −27/100.
The related concept of permille or parts per thousand has an implied denominator of 1000, while the more general partsper notation, as in 75 parts per million, means that the proportion is 75/1,000,000.
Whether common fractions or decimal fractions are used is often a matter of taste and context. Common fractions are used most often when the denominator is relatively small. By mental calculation, it is easier to multiply 16 by 3/16 than to do the same calculation using the fraction's decimal equivalent (0.1875). And it is more accurate to multiply 15 by 1/3, for example, than it is to multiply 15 by any decimal approximation of one third. Monetary values are commonly expressed as decimal fractions, for example $3.75. However, as noted above, in predecimal British currency, shillings and pence were often given the form (but not the meaning) of a fraction, as, for example 3/6 (read "three and six") meaning 3 shillings and 6 pence, and having no relationship to the fraction 3/6.
Like whole numbers, fractions obey the commutative, associative, and distributive laws, and the rule against division by zero.
Multiplying the numerator and denominator of a fraction by the same (nonzero) number results in a fraction that is equivalent to the original fraction. This is true because for any nonzero number , the fraction . Therefore, multiplying by is equivalent to multiplying by one, and any number multiplied by one has the same value as the original number. By way of an example, start with the fraction . When the numerator and denominator are both multiplied by 2, the result is , which has the same value (0.5) as . To picture this visually, imagine cutting a cake into four pieces; two of the pieces together () make up half the cake ().
Dividing the numerator and denominator of a fraction by the same nonzero number will also yield an equivalent fraction. This is called reducing or simplifying the fraction. A simple fraction in which the numerator and denominator are coprime (that is, the only positive integer that goes into both the numerator and denominator evenly is 1) is said to be irreducible, in lowest terms, or in simplest terms. For example, is not in lowest terms because both 3 and 9 can be exactly divided by 3. In contrast, is in lowest terms—the only positive integer that goes into both 3 and 8 evenly is 1.
Using these rules, we can show that = = = .
A common fraction can be reduced to lowest terms by dividing both the numerator and denominator by their greatest common divisor. For example, as the greatest common divisor of 63 and 462 is 21, the fraction can be reduced to lowest terms by dividing the numerator and denominator by 21:
The Euclidean algorithm gives a method for finding the greatest common divisor of any two positive integers.
Comparing fractions with the same denominator only requires comparing the numerators.
If two positive fractions have the same numerator, then the fraction with the smaller denominator is the larger number. When a whole is divided into equal pieces, if fewer equal pieces are needed to make up the whole, then each piece must be larger. When two positive fractions have the same numerator, they represent the same number of parts, but in the fraction with the smaller denominator, the parts are larger.
One way to compare fractions with different numerators and denominators is to find a common denominator. To compare and , these are converted to and . Then bd is a common denominator and the numerators ad and bc can be compared.
It is not necessary to determine the value of the common denominator to compare fractions. This short cut is known as "cross multiplying" – you can just compare ad and bc, without computing the denominator.
Multiply top and bottom of each fraction by the denominator of the other fraction, to get a common denominator:
The denominators are now the same, but it is not necessary to calculate their value – only the numerators need to be compared. Since 5×17 (= 85) is greater than 4×18 (= 72), .
Also note that every negative number, including negative fractions, is less than zero, and every positive number, including positive fractions, is greater than zero, so every negative fraction is less than any positive fraction.
The first rule of addition is that only like quantities can be added; for example, various quantities of quarters. Unlike quantities, such as adding thirds to quarters, must first be converted to like quantities as described below: Imagine a pocket containing two quarters, and another pocket containing three quarters; in total, there are five quarters. Since four quarters is equivalent to one (dollar), this can be represented as follows:
To add fractions containing unlike quantities (e.g. quarters and thirds), it is necessary to convert all amounts to like quantities. It is easy to work out the chosen type of fraction to convert to; simply multiply together the two denominators (bottom number) of each fraction.
For adding quarters to thirds, both types of fraction are converted to twelfths, thus: .
Consider adding the following two quantities:
First, convert into fifteenths by multiplying both the numerator and denominator by three: . Since equals 1, multiplication by does not change the value of the fraction.
Second, convert into fifteenths by multiplying both the numerator and denominator by five: .
Now it can be seen that:
is equivalent to:
This method can be expressed algebraically:
And for expressions consisting of the addition of three fractions:
This method always works, but sometimes there is a smaller denominator that can be used (a least common denominator). For example, to add and the denominator 48 can be used (the product of 4 and 12), but the smaller denominator 12 may also be used, being the least common multiple of 4 and 12.
The process for subtracting fractions is, in essence, the same as that of adding them: find a common denominator, and change each fraction to an equivalent fraction with the chosen common denominator. The resulting fraction will have that denominator, and its numerator will be the result of subtracting the numerators of the original fractions. For instance,
To multiply fractions, multiply the numerators and multiply the denominators. Thus:
To explain the process, consider one third of one quarter. Using the example of a cake, if three small slices of equal size make up a quarter, and four quarters make up a whole, twelve of these small, equal slices make up a whole. Therefore a third of a quarter is a twelfth. Now consider the numerators. The first fraction, two thirds, is twice as large as one third. Since one third of a quarter is one twelfth, two thirds of a quarter is two twelfth. The second fraction, three quarters, is three times as large as one quarter, so two thirds of three quarters is three times as large as two thirds of one quarter. Thus two thirds times three quarters is six twelfths.
A short cut for multiplying fractions is called "cancellation". Effectively the answer is reduced to lowest terms during multiplication. For example:
A two is a common factor in both the numerator of the left fraction and the denominator of the right and is divided out of both. Three is a common factor of the left denominator and right numerator and is divided out of both.
Since a whole number can be rewritten as itself divided by 1, normal fraction multiplication rules can still apply.
This method works because the fraction 6/1 means six equal parts, each one of which is a whole.
When multiplying mixed numbers, it is considered preferable^{[citation needed]} to convert the mixed number into an improper fraction. For example:
In other words, is the same as , making 11 quarters in total (because 2 cakes, each split into quarters makes 8 quarters total) and 33 quarters is , since 8 cakes, each made of quarters, is 32 quarters in total.
To divide a fraction by a whole number, you may either divide the numerator by the number, if it goes evenly into the numerator, or multiply the denominator by the number. For example, equals and also equals , which reduces to . To divide a number by a fraction, multiply that number by the reciprocal of that fraction. Thus, .
To change a common fraction to a decimal, divide the denominator into the numerator. Round the answer to the desired accuracy. For example, to change 1/4 to a decimal, divide 4 into 1.00, to obtain 0.25. To change 1/3 to a decimal, divide 3 into 1.0000..., and stop when the desired accuracy is obtained. Note that 1/4 can be written exactly with two decimal digits, while 1/3 cannot be written exactly with any finite number of decimal digits.
To change a decimal to a fraction, write in the denominator a 1 followed by as many zeroes as there are digits to the right of the decimal point, and write in the numerator all the digits in the original decimal, omitting the decimal point. Thus 12.3456 = 123456/10000.
Decimal numbers, while arguably more useful to work with when performing calculations, sometimes lack the precision that common fractions have. Sometimes an infinite repeating decimal is required to reach the same precision. Thus, it is often useful to convert repeating decimals into fractions.
The preferred way to indicate a repeating decimal is to place a bar over the digits that repeat, for example 0.789 = 0.789789789… For repeating patterns where the repeating pattern begins immediately after the decimal point, a simple division of the pattern by the same number of nines as numbers it has will suffice. For example:
In case leading zeros precede the pattern, the nines are suffixed by the same number of trailing zeros:
In case a nonrepeating set of decimals precede the pattern (such as 0.1523987), we can write it as the sum of the nonrepeating and repeating parts, respectively:
Then, convert both parts to fractions, and add them using the methods described above:
Alternatively, algebra can be used, such as below:
In addition to being of great practical importance, fractions are also studied by mathematicians, who check that the rules for fractions given above are consistent and reliable. Mathematicians define a fraction as an ordered pair (a, b) of integers a and b ≠ 0, for which the operations addition, subtraction, multiplication, and division are defined as follows:^{[10]}
In addition, an equivalence relation is specified as follows: ~ if and only if .
These definitions agree in every case with the definitions given above; only the notation is different.
More generally, a and b may be elements of any integral domain R, in which case a fraction is an element of the field of fractions of R. For example, when a and b are polynomials in one indeterminate, the field of fractions is the field of rational fractions (also known as the field of rational functions). When a and b are integers, the field of fractions is the field of rational numbers.
An algebraic fraction is the indicated quotient of two algebraic expressions. Two examples of algebraic fractions are and . Algebraic fractions are subject to the same laws as arithmetic fractions.
If the numerator and the denominator are polynomials, as in , the algebraic fraction is called a rational fraction (or rational expression). An irrational fraction is one that contains the variable under a fractional exponent or root, as in .
The terminology used to describe algebraic fractions is similar to that used for ordinary fractions. For example, an algebraic fraction is in lowest terms if the only factors common to the numerator and the denominator are 1 and −1. An algebraic fraction whose numerator or denominator, or both, contain a fraction, such as , is called a complex fraction.
Rational numbers are the quotient field of integers. Rational expressions are the quotient field of the polynomials (over some integral domain). Since a coefficient is a polynomial of degree zero, a radical expression such as √2/2 is a rational fraction. Another example (over the reals) is , the radian measure of a right angle.
The term partial fraction is used when decomposing rational expressions into sums. The goal is to write the rational expression as the sum of other rational expressions with denominators of lesser degree. For example, the rational expression can be rewritten as the sum of two fractions: + . This is useful in many areas such as integral calculus and differential equations.
A fraction may also contain radicals in the numerator and/or the denominator. If the denominator contains radicals, it can be helpful to rationalize it (compare Simplified form of a radical expression), especially if further operations, such as adding or comparing that fraction to another, are to be carried out. It is also more convenient if division is to be done manually. When the denominator is a monomial square root, it can be rationalized by multiplying both the top and the bottom of the fraction by the denominator:
The process of rationalization of binomial denominators involves multiplying the top and the bottom of a fraction by the conjugate of the denominator so that the denominator becomes a rational number. For example:
Even if this process results in the numerator being irrational, like in the examples above, the process may still facilitate subsequent manipulations by reducing the number of irrationals one has to work with in the denominator.
In computer displays and typography, simple fractions are sometimes printed as a single character, e.g. ½ (one half). See the article on Number Forms for information on doing this in Unicode.
Scientific publishing distinguishes four ways to set fractions, together with guidelines on use:^{[11]}
The earliest fractions were reciprocals of integers: ancient symbols representing one part of two, one part of three, one part of four, and so on.^{[14]} The Egyptians used Egyptian fractions ca. 1000 BC. About 4,000 years ago Egyptians divided with fractions using slightly different methods. They used least common multiples with unit fractions. Their methods gave the same answer as modern methods.^{[15]} The Egyptians also had a different notation for dyadic fractions in the Akhmim Wooden Tablet and several Rhind Mathematical Papyrus problems.
The Greeks used unit fractions and later continued fractions and followers of the Greek philosopher Pythagoras, ca. 530 BC, discovered that the square root of two cannot be expressed as a fraction. In 150 BC Jain mathematicians in India wrote the "Sthananga Sutra", which contains work on the theory of numbers, arithmetical operations, operations with fractions.
The method of putting one number below the other and computing fractions first appeared in Aryabhatta's work around AD 499.^{[citation needed]} In Sanskrit literature, fractions, or rational numbers were always expressed by an integer followed by a fraction. When the integer is written on a line, the fraction is placed below it and is itself written on two lines, the numerator called amsa part on the first line, the denominator called cheda “divisor” on the second below. If the fraction is written without any particular additional sign, one understands that it is added to the integer above it. If it is marked by a small circle or a cross (the shape of the “plus” sign in the West) placed on its right, one understands that it is subtracted from the integer. For example (to be read vertically), Bhaskara I writes^{[16]}
That is,
to denote 6+1/4, 1+1/5, and 2–1/9.
AlHassār, a Muslim mathematician from Fez, Morocco specializing in Islamic inheritance jurisprudence during the 12th century, first mentions the use of a fractional bar, where numerators and denominators are separated by a horizontal bar. In his discussion he writes, "... for example, if you are told to write threefifths and a third of a fifth, write thus, ."^{[17]} This same fractional notation appears soon after in the work of Leonardo Fibonacci in the 13th century.^{[18]}
In discussing the origins of decimal fractions, Dirk Jan Struik states:^{[19]}
"The introduction of decimal fractions as a common computational practice can be dated back to the Flemish pamphlet De Thiende, published at Leyden in 1585, together with a French translation, La Disme, by the Flemish mathematician Simon Stevin (1548–1620), then settled in the Northern Netherlands. It is true that decimal fractions were used by the Chinese many centuries before Stevin and that the Persian astronomer AlKāshī used both decimal and sexagesimal fractions with great ease in his Key to arithmetic (Samarkand, early fifteenth century)."^{[20]}
While the Persian mathematician Jamshīd alKāshī claimed to have discovered decimal fractions himself in the 15th century, J. Lennart Berggren notes that he was mistaken, as decimal fractions were first used five centuries before him by the Baghdadi mathematician Abu'lHasan alUqlidisi as early as the 10th century.^{[21]}^{[22]}
In primary schools, fractions have been demonstrated through Cuisenaire rods, Fraction Bars, fraction strips, fraction circles, paper (for folding or cutting), pattern blocks, pieshaped pieces, plastic rectangles, grid paper, dot paper, geoboards, counters and computer software.
Several states in the United States have adopted learning trajectories from the Common Core State Standards Initiative's guidelines for mathematics education. Aside from sequencing the learning of fractions and operations with fractions, the document provides the following definition of a fraction: "A number expressible in the form where is a whole number and is a positive whole number. (The word fraction in the standards always refers to a nonnegative number.)"^{[23]} The document itself also refers to negative fractions.
Wikimedia Commons has media related to Fractions. 
Look up denominator in Wiktionary, the free dictionary. 
Look up numerator in Wiktionary, the free dictionary. 
