From Wikipedia, the free encyclopedia - View original article
Forceps or forcipes are a handheld, hinged instrument used for grasping and holding objects. Forceps are used when fingers are too large to grasp small objects or when many objects need to be held at one time while the hands are used to perform a task. The term 'forceps' is used almost exclusively within the medical field. Outside medicine, people usually refer to forceps as tweezers, tongs, pliers, clips or clamps.
'Forceps' can be used as both the singular and plural form of the word. (Example: "I need a forceps.") Also, it is not referred to as a "pair" as one refers to a "pair of scissors". Etymologically, the word derives from the Latin forca, meaning a snare or trap.
Mechanically, forceps employ the principle of the lever to grasp and apply pressure.
Surgical forceps are commonly made of high-grade carbon steel, which ensures they can withstand repeated sterilization in high-temperature autoclaves. Lower quality steel is used in forceps made for other uses. Some forceps, intended to be used once and then discarded, are made of plastic. The invention of surgical forceps is attributed to Stephen Hales
There are two basic types of forceps: non-locking (often called 'thumb forceps' or 'pick-ups') and locking, though these two types come in dozens of specialized forms for various uses. Non-locking forceps also come in two basic forms, hinged at one end, away from the grasping end (colloquially such forceps are called tweezers, though a medical professional would not likely refer to them as such) and hinged in the middle, rather like scissors (though, unlike scissors, forceps are tipped with flat, grasping surfaces rather than interposing blades). Locking forceps are almost always hinged in the middle, though some forms place the hinge very close to the grasping end. Locking forceps use various means to lock the grasping surfaces in a closed position to facilitate manipulation or to independently clamp, grasp or hold an object.
Thumb forceps are commonly held between the thumb and two or three fingers of one hand, with the top end resting on the first dorsal interosseous muscle (see dorsal interossei of the hand) at the base of the thumb and index finger. Spring tension at one end holds the grasping ends apart until pressure is applied. This allows one to quickly and easily grasp small objects or tissue to move and release it or to grasp and hold tissue with easily variable pressure. Thumb forceps are used to hold tissue in place when applying sutures, to gently move tissues out of the way during exploratory surgery and to move dressings or draping without using the hands or fingers.
Thumb forceps can have smooth tips, cross-hatched tips or serrated tips (often called 'mouse's teeth'). Common arrangements of teeth are 1×2 (two teeth on one side meshing with a single tooth on the other), 7×7 and 9×9. Serrated forceps are used on tissue; counter-intuitively, teeth will damage tissue less than a smooth surface (you can grasp with less overall pressure). Smooth or cross-hatched forceps are used to move dressings, remove sutures and similar tasks.
Note the 1×2 "mouse's teeth" on the lower tip.
Locking forceps, sometimes called clamps, are used to grasp and hold objects or tissue. When they are used to compress an artery to forestall bleeding they are called hemostats. Another form of locking forceps is the needle holder, used to guide a suturing needle through tissue. Many locking forceps use finger loops to facilitate handling (see illustration, below, of Kelly Forceps). The finger loops are usually grasped by the thumb and middle or ring fingers, while the index finger helps guide the instrument.
The most common locking mechanism is a series of interlocking teeth located near the finger loops. As the forceps are closed, the teeth engage and keep the instrument's grasping surfaces from separating. A simple shift of the fingers is all that is needed to dis-engage the teeth and allow the grasping ends to move apart. Forceps are also used for surgery.
Kelly forceps are a type of hemostat usually made of stainless steel. They resemble a pair of scissors with the blade replaced by a blunted grip. They also feature a locking mechanism to allow them to act as clamps. Kelly forceps may be floor grade (regular use) and as such not used for surgery. They may also be sterilized and used in operations, in both human and veterinary medicine. They may be either curved or straight. In surgery, they may be used for occluding blood vessels, manipulating [tissues], or for assorted other purposes. They are named for Howard Atwood Kelly, M.D., first professor of obstetrics and gynecology at Johns Hopkins. The "Mosquito" variant of the tool is more delicate and has smaller, finer tips. Other varieties with similar, if more specialized, uses are Allis clamps, Babcocks, Kockers, Carmalts, and tonsils; all but the last bear the names of the surgeons who designed them.
Other types of forceps include:
|Wikimedia Commons has media related to: Forceps|