Dodge Phoenix

From Wikipedia, the free encyclopedia - View original article

Dodge Phoenix
Dodge Phoenix 1960.JPG
1960 Dodge PD4 Phoenix
Overview
ManufacturerChrysler Australia
Production1960 to 1973
AssemblyMile End, Australia
Tonsley Park, Australia
Port Melbourne, Australia
Body and chassis
ClassFull-size
Body style4-door sedan
4-door hardtop
LayoutFR layout
RelatedDodge Dart
Dodge 440
Plymouth Fury
Powertrain
Engine318 cu in (5.2 L) V8
383 cu in (6.3 L) V8
Transmission3spd automatic
Dimensions
Wheelbase(1968) 119.0 in (3023 mm) [1]
Length(1968) 213.1 in (5413 mm) [1]
Width(1968) 77.7 in (1974 mm) [1]
Chronology
PredecessorDodge Custom Royal
SuccessorChrysler by Chrysler
 
Jump to: navigation, search
Not to be confused with Pontiac Phoenix.
Dodge Phoenix
Dodge Phoenix 1960.JPG
1960 Dodge PD4 Phoenix
Overview
ManufacturerChrysler Australia
Production1960 to 1973
AssemblyMile End, Australia
Tonsley Park, Australia
Port Melbourne, Australia
Body and chassis
ClassFull-size
Body style4-door sedan
4-door hardtop
LayoutFR layout
RelatedDodge Dart
Dodge 440
Plymouth Fury
Powertrain
Engine318 cu in (5.2 L) V8
383 cu in (6.3 L) V8
Transmission3spd automatic
Dimensions
Wheelbase(1968) 119.0 in (3023 mm) [1]
Length(1968) 213.1 in (5413 mm) [1]
Width(1968) 77.7 in (1974 mm) [1]
Chronology
PredecessorDodge Custom Royal
SuccessorChrysler by Chrysler

The Dodge Phoenix is an automobile which was produced by Chrysler Australia from 1960 to 1973.

The Phoenix was introduced in May 1960 as an Australian assembled version [2] of the American Dodge Dart,[3] positioned above the locally developed Chrysler Royal as Chrysler Australia’s luxury model. It borrowed its name from the top Dart, the Dodge Dart Phoenix, but unlike its American namesake it was offered only as a four-door sedan [4] and only with a 318 cubic inch V8 engine.[4]

The Phoenix was subsequently restyled in line with the 1961 and 1962 Dodge Dart. For 1963 the new TD2 series Phoenix was derived from the US Dodge 440,[5] and for 1965 and beyond the Phoenix was based on the Canadian Plymouth Fury III.[6] Like the 1965 Fury, the 1965 Phoenix featured vertically stacked headlamps.[3] A four-door hardtop body style joined the sedan in 1967.[4] The hardtop was fitted with a 383 cubic inch V8 engine [4] whilst the sedan continued with the smaller 318 cubic inch V8.[4] The two body styles continued to be offered until the final Australian Phoenix was built in 1973.[7]

Although the 1965 and later Phoenixes were basically Furys, they did feature the North American style full size Dodge Polara instrument panel (adapted for right hand drive). They also continued to use the old-fashioned "clapper" windshield wipers (while North American models used modern parallel-action wipers).

The Australian developed Chrysler by Chrysler then inherited the role of the top level luxury model in Chrysler’s Australian range.

1960-61 Dodge PD4 Phoenix
1961-62 Dodge RD4 Phoenix
1962-63 Dodge SD2 Phoenix
1963-64 Dodge TD2 Phoenix
1964-65 Dodge VD2 Phoenix
1965-66 Dodge AP2D Phoenix
1966-67 Dodge DP6 Phoenix
1968-69 Dodge DD Phoenix 4-Door Hard Top
1971 Dodge DG Phoenix Hardtop


References[edit]

  1. ^ a b c Chrysler Australia sales brochure for 1968 Dodge Phoenix
  2. ^ Latest Dodge is Assembled here, Australian Motor Manual, 1 July 1960, page 11
  3. ^ a b The Phoenix Retrieved from allpar.com on 12 September 2008
  4. ^ a b c d e Glass’s Dealer Guide, Passenger Vehicle Values, South Australian and Northern Territory Edition, June 1973, page 42
  5. ^ Gavin Farmer, Great Ideas in Motion, 2010, page 84
  6. ^ Gavin Farmer, Great Ideas in Motion, 2010, page 87
  7. ^ The Macquarie Dictionary of Motoring, 1986, pages 120-121

External links[edit]