From Wikipedia, the free encyclopedia - View original article
|This article does not cite any references or sources. (October 2009)|
Both the imperial and United States customary systems of measurement derive from earlier English systems used in the Middle Ages, that were the result of a combination of the local Anglo-Saxon units inherited from German tribes and Roman units brought by William the Conqueror after the Norman Conquest of England in 1066.
Having this shared heritage, the two systems are quite similar, but there are differences. The US customary system is based on English systems of the 18th century, while the Imperial system was defined in 1824, after American independence.
Volume may be measured either in terms of units of cubic length or with specific volume units. The units of cubic length (the cubic inch, cubic foot, cubic mile, etc.) are the same in the imperial and US customary systems but with the specific units of volume (the bushel, gallon, fluid ounce, etc.) they differ. The US customary system has one set of units for fluids and another set for dry goods. The imperial system has only one set defined independently of and subdivided differently to its US counterparts.
By the end of the eighteenth century various systems of volume measurement were in use throughout the British Empire. Wine was measured with units based on the Queen Anne's gallon of 231 cubic inches (3.785 L). Beer was measured with units based on an ale gallon of 282 cubic inches (4.621 L). Grain was measured with the Winchester measure with a gallon of approximately 268.8 cubic inches (one eighth of a Winchester bushel or 4.405 L). In 1824 these were replaced with a single system based on the imperial gallon.[note 1] Originally defined as the volume of 10 pounds (4.5 kg) of distilled water (under certain conditions),[note 2] then redefined by The Weights and Measures Act of 1985 to be exactly 4.54609 L (277.4 cu in), the imperial gallon is close in size to the old ale gallon.
The Winchester measure was made obsolete in the British Empire but remained in use in the US.[note 3] The Winchester bushel was replaced with an imperial bushel of 8 imperial gallons. The subdivisions of the bushel were maintained. As with US dry measures the imperial system divides the bushel into 4 pecks, 8 gallons, 32 quarts or 64 pints. Thus all of these imperial measures are about 3% larger than their US dry measure counterparts.
Fluid measure is not as straightforward. The American colonists adopted a system based on the 231-cubic-inch wine gallon for all fluid purposes. This became the US fluid gallon. Both the imperial and US fluid gallon are divided into 4 quarts, 8 pints or 32 gills.[note 4] However, whereas the US gill is divided into 4 US fluid ounces, the imperial gill is divided into 5 imperial fluid ounces. So whilst the imperial gallon, quart, pint and gill are about 20% larger than their US fluid measure counterparts, the fluid ounce is about 4% smaller.[note 5] Note that one avoirdupois ounce of water has an approximate volume of one imperial fluid ounce at 62 °F (16.67 °C).[note 6] This convenient fluid-ounce-to-avoirdupois-ounce relation does not exist in the US system.
One noticeable comparison between the imperial system and the US system is between some Canadian and American beer bottles. Many Canadian brewers package beer in an 12-imperial-fluid-ounce bottles, which are 341 mL each. American brewers package their beer in 12-US-fluid-ounce bottle, which are 355 mL each. This results in the Canadian bottles being labelled as 11.5 fl oz in US units when imported into the United States. Because Canadian beer bottles predate the adoption of the Metric System in that country, they are still sold and labelled in Canada as 341 mL. Canned beer in Canada is sold and labelled in 355 mL cans, and when exported to the US are labelled as 12 fl oz.
The international yard is defined as exactly 0.9144 metres. This definition was agreed by the United States, Canada, the United Kingdom, South Africa, Australia and New Zealand through the international yard and pound agreement of 1959.
The US survey foot and survey mile have been maintained as separate units for surveying purposes to avoid the accumulation of error that would follow replacing them with the international versions, particularly with State_Plane_Coordinate_Systems. (The choice of unit for surveying purposes is based on the unit used when the overall framework or geodetic datum for the region was established, so that - for example - much of the former British empire still uses the Clarke foot for surveying.) The US survey foot is defined so that 1 metre is exactly 39.37 inches, making the international foot of 0.3048 metres two parts per million shorter.
The main units of length (inch, foot, yard and international mile) were the same in the USA, though the USA rarely uses some of the intermediate units, such as the (surveyor's) chain (22 yards) and the furlong (220 yards).
At one time the definition of the nautical mile was based on the sphere whose surface is the same as the Clarke Ellipsoid. In the US, the full value of 1853.256 metres was used, but in the Commonwealth, this was rounded to 6080 feet (1853.184 m). These have been replaced by the international version, which rounds the sixtieth part of the 45° degree to the nearest metre, as 1852 metres.
|Both Britain and the US traditionally used three different weight systems. There was troy weight for precious metals and avoirdupois weight for most other purposes. The third, apothecaries' weight, has been superseded by the metric system. |
One important difference is the widespread use in Britain of the stone of 14 pounds (6.35029318 kg) for body weight. This unit is not used in the United States, although its influence was seen in the practice, until World War II, of selling flour by a barrel of 196 pounds (14 stone). Another difference arose when Britain abolished the troy pound (373.2417216 g) on January 6, 1879, leaving only the troy ounce (31.1034768 g) and its decimal subdivisions, whereas the troy pound (of 12 troy ounces) and pennyweight are still legal in the United States, although no longer widely used.
In all the systems, the fundamental unit is the pound (lb), and all other units are defined as fractions or multiples of it. The tables of imperial troy mass and apothecaries' mass are the same as the corresponding United States tables, except for the British spelling "drachm" in the table of apothecaries' mass. The table of imperial avoirdupois mass is the same as the United States table up to 1 pound, but above that point the tables differ.
The imperial system uses a hundredweight of eight stone or 112 lb (50.80234544 kg), whereas a US hundredweight is 100 lb (45.359237 kg). In both systems, 20 hundredweights make a ton. In the US, the terms long ton (2240 lb, 1016.0469088 kg) and short ton (2000 lb; 907.18474 kg) are used to distinguish them. The term metric ton is also used to denote a tonne (1000 kg, 2204.622 lb), which is about 2% less than the long ton.