From Wikipedia, the free encyclopedia - View original article
A bus (//; plural "buses" or "busses", //, archaically also omnibus, multibus, or autobus) is a road vehicle designed to carry passengers. Buses can have a capacity as high as 300 passengers. The most common type of bus is the single-decker rigid bus, with larger loads carried by double-decker buses and articulated buses, and smaller loads carried by midibuses and minibuses; coaches are used for longer distance services. Bus manufacturing is increasingly globalised, with the same design appearing around the world. 2014
Buses may be used for scheduled bus transport, scheduled coach transport, school transport, private hire, tourism; promotional buses may be used for political campaigns and others are privately operated for a wide range of purposes.
Horse-drawn buses were used from the 1820s, followed by steam buses in the 1830s, and electric trolleybuses in 1882. The first internal combustion engine buses, or motor buses, were used in 1895. Recently there has been growing interest in hybrid electric buses, fuel cell buses, electric buses as well as ones powered by compressed natural gas or bio-diesel.
Bus is a clipped form of the Latin word Omnibus. It appeared in Paris in 1819–20 as (voiture) omnibus meaning (carriage) for all, and appeared in London in 1829. One etymology holds that "omnibus" is derived from a hatter's shop which was situated in front of one of the first bus stations in Nantes, France in 1823. "Omnes Omnibus" was a pun on the Latin sounding name of that hatter Omnès: omnes meaning "all" and omnibus means "for all" in Latin. Nantes citizens soon gave the nickname of Omnibus to the vehicle.
A short-lived early public bus line (known as a "Carriage" at that time) was launched by Blaise Pascal in Paris in 1662 and was quite popular until fares were increased and access to the service was restricted to high society members by regulation. Services ceased after 15 years and no further such services were known until the 1820s.
John Greenwood arguably established the first modern omnibus service in 1824. As the keeper of a toll-gate in Pendleton on the Manchester to Liverpool turnpike, he purchased a horse and a cart with several seats and began an omnibus service between those two locations. His pioneering idea was to offer a service where, unlike with a stagecoach, no prior booking was necessary and the driver would pick up or set down passengers anywhere on request. Later on he added daily services to Buxton, Chester, and Sheffield. His line immediately sparked fierce competition and a dense network of omnibus services quickly sprouted in the area, often acting as feeders to the railways. In 1865, Greenwood's company and its competitors amalgamated into the Manchester Carriage Company.
In Nantes, France, a similar service to Greenwood's was established by Stanislas Baudry in 1826 and soon expanded into the Bordeaux region. By 1828 he was licensed by the city authorities of Paris for the provision of ten services throughout the capital. The coaches used along this line were of innovative design; they were capable of transporting as many as two dozen people at a time and had three in-built compartments for the different paying classes. The coaches were commissioned from the English engineer George Shillibeer and were introduced into the streets of Paris in 1827. Shillibeer built another bus for the Quaker Newington Academy for Girls near London; this had a total of twenty-five seats, and entered history as the first school bus.
Whilst in Paris, Shillibeer concluded that operating similar vehicles in London, but for the fare-paying public with multiple stops, would be a paying enterprise, so he returned to his native city. His first London "Omnibus" took up service on 4 July 1829 on the route between Paddington (The Yorkshire Stingo) and "Bank" (Bank of England) via the "New Road" (now Marylebone Rd), Somers Town and City Rd. Four services were provided in each direction daily. Shillibeer's success prompted many competitors to enter the market and for a time buses were referred to as 'Shillibeers' despite Shillibeer having previously coined the term 'omnibus'.
Although passenger-carrying carriages had operated for many years, the new 'Omnibus' pioneered a new service of picking up and setting down customers all along a particular route without the need to book in advance. Buses soon expanded their capacity, with additional seats for a few extra passengers provided alongside the driver. By 1845 passengers were being accommodated on the curved roofs, seated back to back in a configuration known as ‘knife-board’. In 1852, Greenwood's in Manchester introduced the double-Decker vehicle that could seat up to 42.
In Germany, the first bus service was established in Berlin in 1825, running from Brandenburger Tor to Charlottenburg. In 1850 Thomas Tilling started horse bus services in London, and in 1855 the London General Omnibus Company or LGOC was founded to amalgamate and regulate the horse-drawn omnibus services then operating in London.
By the 1880s, bus services were a commonplace in England, Continental Europe and North America - one company in London was operating over 220 horse-buses. Horse-bus use declined with the advent of steam-buses and motor-buses; the last horse bus in London stopped operation in 1914.
Regular intercity bus services by steam-powered buses were pioneered in England in the 1830s by Walter Hancock and by associates of Sir Goldsworthy Gurney among others, running reliable services over road conditions which were too hazardous for horse-drawn transportation. Steam carriages were much less likely to overturn, they travelled faster than horse-drawn carriages, they were much cheaper to run and caused much less damage to the road surface due to their wide tyres.
However, the heavy road tolls imposed by the turnpike trusts discouraged steam road vehicles and left the way clear for the horse bus companies, and from 1861 onwards, harsh legislation virtually eliminated mechanically-propelled vehicles altogether from the roads of Great Britain for 30 years, the Locomotive Act of that year imposing restrictive speed limits on "road locomotives" of 5 mph in towns and cities, and 10 mph in the country.
In parallel to the development of the bus was the invention of the electric trolleybus, typically fed through trolley poles by overhead wires. The Siemens brothers, William in England and Ernst Werner in Germany collaborated on the development of the trolleybus concept. Sir William first proposed the idea in an article to the Journal of the Society of Arts in 1881 as an "...arrangement by which an ordinary omnibus...would have a suspender thrown at intervals from one side of the street to the other, and two wires hanging from these suspenders; allowing contact-rollers to run on these two wires, the current could be conveyed to the tram-car, and back again to the dynamo machine at the station, without the necessity of running upon rails at all."
The first such vehicle, the Electromote, was made by his brother Dr. Ernst Werner von Siemens and presented to the public in 1882 in Halensee, Germany. Although this experimental vehicle fulfilled all the technical criteria of a typical trolleybus, it was dismantled in the same year after the demonstration.
Max Schiemann opened the world's first passenger-carrying trolleybus in 1901 near Dresden, in Germany. Although this system operated only until 1904, Schiemann had developed what is now the standard trolleybus current collection system. In the early days there were a few other methods of current collection. Leeds and Bradford became the first cities to put trolleybuses into service in Great Britain on 20 June 1911.
In Siegerland, Germany two passenger bus lines ran briefly, but unprofitably, in 1895 using a 6 passenger motor carriage developed from the 1893 Benz Viktoria. Another commercial bus line using the same model Benz omnibuses ran for a short time in 1898 in the rural area around Llandudno, Wales.
Daimler also produced one of the earliest motor-bus models in 1898, selling a double-decker bus to the Motor Traction Company for use on the streets of London. The vehicle had a maximum speed of 18 kph and accommodated up to 20 passengers, in an enclosed area below and on an open-air platform above. With the success and popularity of this bus, Daimler expanded production, selling more buses to companies in London and, in 1899, to Stockholm and Speyer. Daimler also entered into a partnership with the British company Milnes and developed a new double-decker in 1902 that became the market standard.
The first mass-produced bus model was the B-type double-decker bus, designed by Frank Searle and operated by the London General Omnibus Company - it entered service in 1910, and almost 3,000 had been built by the end of the decade. Hundreds saw military service on the Western Front during the First World War.
The Yellow Coach Manufacturing Company which rapidly became a major manufacturer of buses in the US, was founded in Chicago in 1923 by John D. Hertz. General Motors purchased a majority stake in 1925 and changed its name to the Yellow Truck & Coach Manufacturing Company. They then purchased the balance of the shares in 1943 to form the GM Truck & Coach Division.
Models expanded in the 20th century, leading to the widespread introduction of the contemporary recognizable form of full size buses from the 1950s. The Routemaster, developed in the 1950s, was a pioneering design and remains an icon of London to this day. The innovative design used lightweight aluminium and techniques developed in aircraft production during World War II. As well as a novel weight-saving integral design, it also introduced for the first time on a bus independent front suspension, power steering, a fully automatic gearbox and power-hydraulic braking.
Formats include single-decker bus, double-decker bus (both usually with a rigid chassis) and articulated bus (or 'bendy-bus') the prevalence of which varies from country to country. Bi-articulated buses are also manufactured, and passenger-carrying trailers—either towed behind a rigid bus (a bus trailer), or hauled as a trailer by a truck (a trailer bus). Smaller midibus have a lower capacity and open-top bus are typically used for leisure purposes. In many new fleets, particularly in local transit systems, there is an increasing shift to low-floor buses primarily for easier accessibility. Coaches are designed for longer-distance travel and are typically fitted with individual high-backed reclining seats, seat-belts, toilets, audio-visual entertainment systems and can operate at higher speeds with more capacity for luggage. Coaches may be single- or double-deckers, articulated and often include a separate luggage compartment under the passenger floor. Guided buses are fitted with technology to allow them to run in designated guideways, allowing the controlled alignment at bus stops and less space taken up by guided lanes than conventional roads or bus lanes.
Bus manufacturing may be by a single company (an integral manufacturer), or by one manufacturer's building a bus body over a chassis produced by another manufacturer.
Transit buses used to be mainly high-floor vehicles. However, they are now increasingly of low-floor design and optionally also 'kneel' air suspension and have electrically or hydraulically extended under-floor ramps to provide level access for wheelchair users and people with baby carriages. Prior to more general use of such technology these wheelchair users could only use specialist paratransit mobility buses.
Accessible vehicles also have wider entrances and interior gangways and space for wheelchairs. Interior fittings and destination displays may also be designed to be usable by the visually impaired. Coaches generally use wheelchair lifts instead of low floor designs. In some countries vehicles are required to have these features by disability discrimination laws.
Buses were initially configured with an engine in the front and an entrance at the rear. With the transition to one-man operation, many manufacturers moved to mid or rear-engined designs, with a single door at the front, or multiple doors. The move to the low-floor design has all but eliminated the mid-engined design, although some coaches still have mid mounted engines. Front-engined buses still persist for niche markets such as American school buses, some minibuses, and buses in less developed countries, which may be derived from truck chassis, rather than purpose-built bus designs. Most buses have two axles, articulated buses have three.
Guided buses are fitted with technology to allow them to run in designated guideways, allowing the controlled alignment at bus stops and less space taken up by guided lanes than conventional roads or bus lanes. Guidance can be mechanical, optical or electromagnetic. Guidance is often, but not exclusively, employed as part of a BRT scheme. Extensions of the guided technology include the Guided Light Transit and Translohr systems, although these are more often termed 'rubber tyred trams' as they have limited or no mobility away from their guideways.
Transit buses are normally painted to identify the operator or a route, function or to demarcate low-cost or premium service buses. Liveries may be painted onto the vehicle, applied using adhesive vinyl technologies or using decals. Vehicles often also carry bus advertising or part or all of their visible surfaces (as mobile billboard). Campaign buses may be decorated with key campaign messages, these can be to promote an event or initiative.
The most common power source since the 1920s has been the diesel engine. Early buses, known as trolleybus, were powered by electricity supplied from overhead lines. Nowadays, electric buses often carry their own battery, which is sometimes recharged on stops/stations in order to keep the size of the battery small/lightweight. Currently there is interest in hybrid electric buses, fuel cell buses, electric buses and ones powered by compressed natural gas or bio-diesel. Gyrobuses, which are powered by the momentum stored by a flywheel were tried in the 1940s.
Early bus manufacturing grew out of carriage coachbuilding, and later out of automobile or truck manufacturers. Early buses were merely a bus body fitted to a truck chassis. This body+chassis approach has continued with modern specialist manufacturers, although there also exist integral designs such as the Leyland National where the two are practically inseparable. Specialist builders also exist and concentrate on building buses for special uses, or modifying standard buses into specialised products.
Integral designs have the advantages that they are have been well tested for strength, stability and so forth, and also are off-the-shelf. But there are, however, two incentives to use the chassis+body model. First it allows the buyer and manufacturer both to shop for the best deal for their needs, rather than having to settle on one fixed design—the buyer can choose the body and the chassis separately. Second it is likely that over the lifetime of a vehicle (in constant service and heavy traffic) that it will get minor damage now and again, and to be able easily to replace a body panel or window etc. can vastly increase its service life and save the cost and inconvenience of removing it from service.
As with the rest of the automotive industry, into the 20th century bus manufacturing increasingly became globalized, with manufacturers producing buses far from their intended market to exploit labour and material cost advantages. As with the cars, new models are often exhibited by manufacturers at prestigious industry shows to gain new orders.
Transit bus, used on public transport bus services, have utilitarian fittings designed for efficient movement of large numbers of people, and often have multiple doors. Coaches are used for longer distance routes. High capacity bus rapid transit services may use the bi-articulated bus or tram style buses such as Wright StreetCar and the Irisbus Civis.
Buses and coach services often operate to a pre-determined published public transport timetable defining the route and the timing, however smaller vehicles may be used on more flexible demand responsive transport services.
Buses play a major part in the tourism industry. Tour buses around the world allow tourists to view local attractions or scenery. These are often open-top buses, but can also be by regular bus or coach.
In local sightseeing, City Sightseeing is the largest operator of local tour buses, operating on a franchised basis all over the world. Specialist tour buses are also often owned and operated by safari parks and other theme parks or resorts. Longer distance tours are also carried out by bus, either on a turn up and go basis or through a tour operator, and usually allow disembarkation from the bus to allow touring of sites of interest on foot. These may be day trips or longer excursions incorporating hotel stays. Tour buses will often carry a tour guide, although the driver or a pre-recorded audio commentary may also perform this function. The tour operator may itself be a subsidiary of a bus operating company that operates buses and coaches for other uses, or an independent company that charters buses or coaches. Commuter transport operators may also use their coaches to conduct tours within the target city between the morning and evening commuter transport journey.
Buses and coaches are also a common component of the wider package holiday industry, providing private airport transfers (in addition to general airport buses) and organised tours and day trips for holidaymakers on the package.
Public long distance coach networks are also often used as a low-cost method of travel by students or young people travelling the world. Some companies such as Topdeck Travel were set up to specifically use buses to drive the hippie trail or travel to places like north Africa.
In many tourist or travel destinations, a bus is part of the tourist attraction, such as the North American tourist trolleys, London’s Routemaster heritage routes, or the customised buses of Malta, Asia and the Americas.
In some countries, particularly the USA and Canada, buses used to transport school children have evolved into a specific design with specified mandatory features. These school buses feature things such as the school bus yellow livery and crossing guards. Other countries may mandate the use of seat belts. As a minimum many countries require that a bus carrying students displays a sign, and may also adopt yellow liveries. Student transport often uses older buses cascaded from service use, retro-fitted with more seats and/or seatbelts. Student transport may be operated by local authorities or private contractors. Schools may also own and operate their own buses for other transport needs, such as class field trips, or to transport associated sports, music or other school groups.
Due to the costs involved in owning, operating, and driving buses and coaches, many bus and coach uses a private hire of vehicles from charter bus companies, either for a day or two, or a longer contract basis, where the charter company provides the vehicles and qualified drivers.
Charter bus operators may be completely independent businesses, or charter hire may be a subsidiary business of a public transport operator who might maintain a separate fleet or use surplus buses, coaches, and dual purpose coach seated buses. Many private taxicab companies also operate larger minibus vehicles to cater for group fares. Companies, private groups and social clubs may hire buses or coaches as a cost-effective method of transporting a group to an event or site, such as a group meeting, racing event, or organised recreational activity such as a summer camp. Entertainment or event companies may also hire temporary shuttles buses for transport at events such as festivals or conferences. Party buses are used by companies in a similar manner to limousine hire, for luxury private transport to social events or as a touring experience. Sleeper buses are used by bands or other organisations that tour between entertainment venues and require mobile rest and recreation facilities. Some couples hire preserved buses for their wedding transport instead of the traditional car. Buses are often hired for parades or processions. Victory parades are often held for triumphant sports teams, who often tour their home town or city in an open-top bus. Sports teams may also contract out their transport to a team bus, for travel to away games, to a competition or to a final event. These buses are often specially decorated in a livery matching the team colours. Private companies often contract out private shuttle bus services, for transport of their customers or patrons, such as hotels, amusement parks, university campuses or private airport transfer services. This shuttle usage can be as transport between locations, or to and from parking lots. High specification luxury coaches are often chartered by companies for executive or VIP transport. Charter buses may also be used in tourism and for promotion (See Tourism and Promotion sections)
Many organisations, including the police, not for profit, social or charitable groups with a regular need for group transport may find it practical or cost-effective to own and operate a bus for their own needs. These are often minibuses for practical, tax and driver licensing reasons, although they can also be full size buses. Cadet or scout groups or other youth organizations may also own buses. Specific charities may exist to fund and operate bus transport, usually using specially modified mobility buses or otherwise accessible buses (See Accessibility section). Some use their contributions to buy vehicles, and provide volunteer drivers.
Airport operators make use of special airside airport buses for crew and passenger transport in the secure airside parts of an airport. Some public authorities, police forces and military forces make use of armoured buses where there is a special need to provide increased passenger protection. The United States Secret Service acquired two in 2010 for transporting dignitaries needing special protection. Police departments make use of police buses for a variety of reasons, such as prisoner transport, officer transport, temporary detention facilities, and as command and control vehicles. Some fire departments also use a converted bus as a command post, while those in cold climates might retain a bus as a heated shelter at fire scenes. Many are drawn from retired school or service buses.
Buses are often used for advertising, political campaigning, public information campaigns, public relations or promotional purposes. These may take the form of temporary charter hire of service buses, or the temporary or permanent conversion and operation of buses, usually of second-hand buses. Extreme examples include converting the bus with displays and decorations or awnings and fittings. Interiors may be fitted out for exhibition or information purposes with special equipment and/or audio visual devices.
Bus advertising takes many forms, often as interior and exterior adverts and all-over advertising liveries. The practice often extends into the exclusive private hire and use of a bus to promote a brand or product, appearing at large public events, or touring busy streets. The bus is sometimes staffed by promotions personnel, giving out free gifts. Campaign buses are often specially decorated for a political campaign or other social awareness information campaign, designed to bring a specific message to different areas, and/or used to transport campaign personnel to local areas/meetings. Exhibition buses are often sent to public events such as fairs and festivals for purposes such as recruitment campaigns, for example by private companies or the armed forces. Complex urban planning proposals may be organised into a mobile exhibition bus for the purposes of public consultation.
Historically, the types and features of buses have developed according to local needs. Buses were fitted with technology appropriate to the local climate or passenger needs, such as air conditioning in Asia, or cycle mounts on North American buses. The bus types in use around the world where there was little mass production were often sourced second hand from other countries, such as the Malta bus, and buses in use in Africa. Other countries such as Cuba required novel solutions to import restrictions, with the creation of the "camellos" (camel bus), a specially manufactured trailer bus.
After the Second World War, manufacturers in Europe and the Far East, such as Mercedes-Benz buses and Mitsubishi Fuso expanded into other continents influencing the use of buses previously served by local types. Use of buses around the world has also been influenced by colonial associations or political alliances between countries. Several of the Commonwealth nations followed the British lead and sourced buses from British manufacturers, leading to a prevalence of double-decker buses. Several Eastern Bloc countries adopted trolleybus systems, and their manufacturers such as Trolza exported trolleybuses to other friendly states. In the 1930s Italy designed the world's only[dubious ] triple decker bus for the busy route between Rome and Tivoli that could carry eighty-eight passengers. It was unique not only in being a triple decker but having a separate smoking compartment on the third level.
The buses to be found in countries around the world often reflect the quality of the local road network, with high floor resilient truck based designs prevalent in several less developed countries where buses are subject to tough operating conditions. Population density also has a major impact, where dense urbanisation such as in Japan and the far east has led to the adoption of high capacity long multi-axle buses, often double-deckers, while South America and China are implementing large numbers of articulated buses for bus rapid transit schemes.
Euro Bus Expo is a trade show, which is held bi-annually at the UK's National Exhibition Centre in Birmingham. As the official show of the Confederation of Passenger Transport, the UK’s trade association for the bus, coach and light rail industry, the three-day event offers visitors from Europe and beyond the chance to see and experience, at first hand, the very latest vehicles and product and service innovations right across the industry. The next show will be held in November 2014.
Busworld Kortrijk is the leading bus trade fair in Europe is the Busworld in Kortrijk in Belgium. It is held bi-annually, last time October 2011 and next time October 2013.
Most public or private buses and coaches, once they have reached the end of their service with one or more operators, are sent to the wrecking yard for breaking up for scrap and spare parts. Some buses, while not economical to keep running as service buses, are often converted in some way for use by the operator, or another user, for purposes other than revenue earning transport. Much like old cars and trucks, buses often pass through a dealership where they can be bought for a price or at auction.
Bus operators will often find it economical to convert retired buses to use as permanent training buses for driver training, rather than taking a regular service bus out of use. Some large operators also converted retired buses into tow bus vehicles, to act as tow trucks. With the outsourcing of maintenance staff and facilities, the increase in company health and safety regulations, and the increasing curb weights of buses, many operators now contract their towing needs to a professional vehicle recovery company.
Some retired buses have been converted to static or mobile cafés, often using historic buses as a tourist attraction. Food is also provided from a catering bus, in which a bus is converted into a mobile canteen and break room. These are commonly seen at external filming locations to feed the cast and crew, and at other large events to feed staff. Another use is as an emergency vehicle, such as high-capacity ambulance bus or mobile command center.
Some organisations adapt and operate playbuses or learning buses to provide a playground or learning environments to children who might not have access to proper play areas. An ex-London Routemaster bus has been converted to a mobile theatre and catwalk fashion show.
Rather than being scrapped or converted for other uses, sometimes retired buses are saved for preservation. This can be done by individuals, volunteer preservation groups or charitable trusts, museums, or sometimes by the operators themselves as part of a heritage fleet. These buses often need to undergo a degree of vehicle restoration to restore them to their original condition, and will have their livery and other details such as internal notices and rollsigns restored to be authentic to a specific time in the bus's actual history. Some buses that undergo preservation are rescued from a state of great disrepair, but others enter preservation with very little wrong with them. As with other historic vehicles, many preserved buses either in a working or static state form part of the collections of transport museums. Working buses will often be exhibited at rallies and events, and they are also used as charter buses. While many preserved buses are quite old or even vintage, in some cases relatively new examples of a bus type can enter restoration. In-service examples are still in use by other operators. This often happens when a change in design or operating practice, such as the switch to one person operation or low floor technology, renders some buses redundant while still relatively new.
|Look up bus in Wiktionary, the free dictionary.|