Bristol Centaurus

From Wikipedia, the free encyclopedia - View original article

Centaurus
Preserved Bristol Centaurus engine
TypePiston aircraft engine
ManufacturerBristol Aeroplane Company
First runJuly 1938
Major applicationsHawker Tempest
Bristol Brabazon
Hawker Sea Fury
Number builtc.2,500
 
Jump to: navigation, search
Centaurus
Preserved Bristol Centaurus engine
TypePiston aircraft engine
ManufacturerBristol Aeroplane Company
First runJuly 1938
Major applicationsHawker Tempest
Bristol Brabazon
Hawker Sea Fury
Number builtc.2,500

The Centaurus was the final development of the Bristol Engine Company's series of sleeve valve radial aircraft engines, an 18-cylinder, two-row design that eventually delivered over 3,000 hp (2,200 kW).[1] It was one of the largest piston aircraft engines to enter production, and was introduced into service use towards the end of World War II.

The Royal Navy Historic Flight currently operates a Hawker Sea Fury, powered by a Bristol Centaurus.

Contents

Design and development

Like most Bristol Engines designs, the Centaurus was based on the mechanicals of an earlier design, in this case the "classic" 5.75 in (146 mm) piston from their original 1918 Jupiter. The Jupiter piston was still in use in the contemporary 14-cylinder Hercules, which was being brought into production during the design of the Centaurus. The Centaurus had a cylinder capacity of 3,270 in³ (53.6 l), making it one of the largest piston aircraft engines to enter production, while that of the Hercules was 2,364 cubic inches (38.7 l). The nearly 40% higher capacity was achieved by increasing the stroke from 6.5 to 7 in (170 to 180 mm), and by changing to two rows of nine cylinders instead of two rows of seven, but the overall diameter of the Centaurus was only just over 6% greater.[2]

While Bristol maintained the Centaurus dated from 1938 (the year it was originally type-tested),[2] production could not start until 1942 owing to the need to get the Hercules into production and improve the reliability of the entire engine line. Nor was there any real need for the larger engine at this early point in the war, when most military aircraft designs were intended to mount engines of 1,000 hp or a little more. The Hercules' approximately 1,500 hp was simply better suited to the existing airframes then in production.

In fact, the Centaurus did not see any use until near the end of the war, first appearing on an upscaled version of the Vickers Wellington, the Warwick. Other wartime, or just-postwar, applications included the Bristol Brigand and Buckmaster, Hawker Tempest and Sea Fury, and the Blackburn Firebrand and Beverley. The engine also saw post-war use in civilian airliners, including the ill-fated Bristol Brabazon.

By the end of the war in Europe, around 2,500 examples of the Centaurus had been produced by Bristol.[2]

A projected enlarged capacity version of the Centaurus was designed by Roy Fedden, cylinders were produced for this engine but it was never built. Known as the Bristol Orion (a name used previously for a variant of the Jupiter engine, and later re-used for a turboprop one) this development was also a two-row, 18 cylinder sleeve valve engine with the displacement increased to 4,142 cubic inches (67.9 l).[3]

Variants

The Centaurus was produced in 34 distinct variants ranging from the 2,000 hp (1,490 kW) Centaurus I to the 2,405 hp (1,793 kW) Centaurus 663 for the Airspeed Ambassador airliner. The most powerful variants were the 2,625 hp (1,957 kW) Centaurus 170, 173, 660, 661 and 662.[4]

Applications

Note:[5]

Survivors

The Royal Navy Historic Flight operates a Hawker Sea Fury powered by a Bristol Centaurus.[6]

Engines on display

Preserved Bristol Centaurus engines are on public display at the following museums:

Specifications (Centaurus VII)

A Centaurus with cylinders removed exposing the sleeve valves

Data from Lumsden[7]

General characteristics

Components

Performance

See also

Related development
Comparable engines
Related lists

References

Notes

  1. ^ Gunston 1989, p.33.
  2. ^ a b c Bridgman (Jane's) 1998, p. 270.
  3. ^ Gunston 2006, p.152.
  4. ^ Lumsden 2003, pp.125-128.
  5. ^ List from Lumsden
  6. ^ Royal Navy Historic Flight - Aircraft Retrieved: 5 August 2009
  7. ^ Lumsden 2003, p.125.

Bibliography

  • Bridgman, L, (ed.) (1998) Jane's Fighting Aircraft of World War II. Crescent. ISBN 0-517-67964-7
  • Gunston, Bill. Development of Piston Aero Engines. Cambridge, England. Patrick Stephens Limited, 2006. ISBN 0-7509-4478-1
  • Gunston, Bill. World Encyclopedia of Aero Engines. Cambridge, England. Patrick Stephens Limited, 1989. ISBN 1-85260-163-9
  • Lumsden, Alec. British Piston Engines and their Aircraft. Marlborough, Wiltshire: Airlife Publishing, 2003. ISBN 1-85310-294-6.

External links