Baryte

From Wikipedia, the free encyclopedia - View original article

Baryte (barite)
6158M-barite2.jpg
Baryte crystals from Cerro Huarihuyn, Mirafneelores, Huamalíes, Huánuco, Peru
(size 56 x 53 mm, 74 g)
General
CategorySulfate mineral, barite group
Formula
(repeating unit)
BaSO4
Strunz classification07.AD.35
Dana classification28.03.01.01
Crystal symmetryOrthorhombic (2/m 2/m 2/m) dipyramidal
Unit cella = 8.884(2) Å, b = 5.457(3) Å, c = 7.157(2) Å; A = 4
Identification
ColorColorless, white, light shades of blue, yellow, grey, brown
Crystal habitTabular parallel to base, fibrous, nodular to massive
Crystal systemOrthorhombic
CleavagePerfect cleavage parallel to base and prism faces: {001} Perfect, {210} Perfect, {010} Imperfect
FractureIrregular/uneven
TenacityBrittle
Mohs scale hardness3-3.5
LusterVitreous, pearly
StreakWhite
Diaphaneitytransparent to opaque
Specific gravity4.3–5
Density4.48 g/cm3[1]
Optical propertiesbiaxial positive
Refractive indexnα = 1.634–1.637
nβ = 1.636–1.638
nγ = 1.646–1.648
Birefringence0.012
Fusibility4, yellowish green barium flame
Diagnostic featureswhite color, high specific gravity, characteristic cleavage and crystals
Solubilitylow
References[2][3][4][5]
 
Jump to: navigation, search
Baryte (barite)
6158M-barite2.jpg
Baryte crystals from Cerro Huarihuyn, Mirafneelores, Huamalíes, Huánuco, Peru
(size 56 x 53 mm, 74 g)
General
CategorySulfate mineral, barite group
Formula
(repeating unit)
BaSO4
Strunz classification07.AD.35
Dana classification28.03.01.01
Crystal symmetryOrthorhombic (2/m 2/m 2/m) dipyramidal
Unit cella = 8.884(2) Å, b = 5.457(3) Å, c = 7.157(2) Å; A = 4
Identification
ColorColorless, white, light shades of blue, yellow, grey, brown
Crystal habitTabular parallel to base, fibrous, nodular to massive
Crystal systemOrthorhombic
CleavagePerfect cleavage parallel to base and prism faces: {001} Perfect, {210} Perfect, {010} Imperfect
FractureIrregular/uneven
TenacityBrittle
Mohs scale hardness3-3.5
LusterVitreous, pearly
StreakWhite
Diaphaneitytransparent to opaque
Specific gravity4.3–5
Density4.48 g/cm3[1]
Optical propertiesbiaxial positive
Refractive indexnα = 1.634–1.637
nβ = 1.636–1.638
nγ = 1.646–1.648
Birefringence0.012
Fusibility4, yellowish green barium flame
Diagnostic featureswhite color, high specific gravity, characteristic cleavage and crystals
Solubilitylow
References[2][3][4][5]

Baryte, or barite, (BaSO4) is a mineral consisting of barium sulfate.[2] The baryte group consists of baryte, celestine, anglesite and anhydrite. Baryte itself is generally white or colorless, and is the main source of barium. Baryte and celestine form a solid solution (Ba,Sr)SO4.[1]

Names and history[edit source | edit]

The unit cell of barite

The radiating form, sometimes referred to as Bologna Stone, attained some notoriety among alchemists for the phosphorescent specimens found in the 17th century near Bologna by Vincenzo Casciarolo.[6]

The American Petroleum Institute specification API 13/ISO 13500 which governs baryte for drilling purposes does not refer to any specific mineral, but rather a material that meets that specification. In practice this is usually the mineral baryte.

The term "primary baryte" refers to the first marketable product, which includes crude baryte (run of mine) and the products of simple beneficiation methods, such as washing, jigging, heavy media separation, tabling, flotation. Most crude baryte requires some upgrading to minimum purity or density. Baryte that is used as an aggregate in a "heavy" cement is crushed and screened to a uniform size. Most baryte is ground to a small, uniform size before it is used as a filler or extender, an addition to industrial products, or a weighting agent in petroleum well drilling mud.

Name[edit source | edit]

The name baryte is derived from the Greek word βαρύς (heavy). The American spelling is barite.[2][7] The International Mineralogical Association adopted "barite" as the official spelling when it formed in 1959[citation needed], but recommended adopting the older "baryte" spelling in 1978,[8] notably ignored by the Mineralogical Society of America.

Other names have been used for baryte, including barytine,[8] barytite,[8] schwerspath,[8] barytes,[2] Heavy Spar,[2] tiff,[3] and blanc fixe.

Mineral associations and locations[edit source | edit]

Baryte with galena and hematite from Poland
Large barite crystals from Nevada, USA
Abandoned baryte mine shaft near Aberfeldy, Perthshire, Scotland.

Baryte occurs in a large number of depositional environments, and is deposited through a large number of processes including biogenic, hydrothermal, and evaporation, among others.[1] Baryte commonly occurs in lead-zinc veins in limestones, in hot spring deposits, and with hematite ore. It is often associated with the minerals anglesite and celestine. It has also been identified in meteorites.[9]

Baryte has been found at locations in Brazil, Nigeria, Canada, Chile, China, India, Greece, Iran, Ireland (where it was mined on Benbulben[10]), Liberia, Morocco, Peru, Romania (Baia Sprie), Turkey, South Africa (Barberton Mountain Land),[11] Thailand, UK (Cornwall, Cumbria, Derbyshire, Durham,[12] Perthshire, Argyllshire and Surrey[2]) and in the USA from Cheshire, Connecticut, De Kalb, New York and Fort Wallace, New Mexico. It is mined in Arkansas, Connecticut, Virginia, North Carolina, Georgia, Tennessee, Kentucky, Nevada and Missouri.[2]

The major baryte producers (in thousand tonnes, data for 2010) are as follows: China (3,600), India (1,000), United States (670), Morocco (460), Iran (250), Turkey (150) and Kazakhstan (100).[13]

Uses[edit source | edit]

Some 77% worldwide is used as a weighting agent for drilling fluids in oil and gas exploration to suppress high formation pressures and prevent blowouts. As a well is drilled, the bit passes through various formations, each with different characteristics. The deeper the hole, the more barite is needed as a percentage of the total mud mix. An additional benefit of barite is that it is non-magnetic and thus does not interfere with magnetic measurements taken in the borehole, either during logging-while-drilling or in separate drill hole logging. Barite used for drilling petroleum wells can be black, blue, brown or gray depending on the ore body. The barite is finely ground so that at least 97% of the material, by weight, can pass through a 200-mesh (75-μm) screen, and no more than 30%, by weight, can be less than 6 μm diameter. The ground barite also must be dense enough so that its specific gravity is 4.2 or greater, soft enough to not damage the bearings of a tricone drill bit, chemically inert, and containing no more than 250 milligrams per kilogram of soluble alkaline salts.[7]

Other uses are in added-value applications which include filler in paint and plastics, sound reduction in engine compartments, coat of automobile finishes for smoothness and corrosion resistance, friction products for automobiles and trucks, radiation-shielding cement, glass ceramics and medical applications (for example, a barium meal before a contrast CAT scan). Baryte is supplied in a variety of forms and the price depends on the amount of processing; filler applications commanding higher prices following intense physical processing by grinding and micronising, and there are further premiums for whiteness and brightness and color.[7]

Historically baryte was used for the production of barium hydroxide for sugar refining, and as a white pigment for textiles, paper, and paint.[2]

Although baryte contains a "heavy" metal (barium), it is not considered to be a toxic chemical by most governments because of its extreme insolubility.

Paleothermometry[edit source | edit]

Baryte with Cerussite from Morocco

In the deep ocean, away from continental sources of sediment, pelagic baryte crystallizes out and forms a significant amount of the sediments. Since baryte has oxygen, systematics in the δ18O of these sediments have been used to help constrain paleotemperatures for oceanic crust. Similarly the variations in sulfur isotopes are also being exploited.[14]

See also[edit source | edit]

References[edit source | edit]

 This article incorporates public domain material from the United States Geological Survey document: "Barite". 

  1. ^ a b c Hanor, J. (2000). "Barite-celestine geochemistry and environments of formation". Reviews in Mineralogy (Washington, DC: Mineralogical Society of America) 40: 193–275. ISBN 0-939950-52-9. 
  2. ^ a b c d e f g h Dana, James Dwight; Ford, William Ebenezer (1915). Dana's Manual of Mineralogy for the Student of Elementary Mineralogy, the Mining Engineer, the Geologist, the Prospector, the Collector, Etc. (13 ed.). John Wiley & Sons, Inc. pp. 299–300. 
  3. ^ a b Barite at Mindat
  4. ^ Webmineral data for barite
  5. ^ Baryte, Handbook of Mineralogy
  6. ^ History of the Bologna stone
  7. ^ a b c M. Michael Miller Barite, 2009 Minerals Yearbook
  8. ^ a b c d "International Mineralogical Association: Commission on New Minerals and Mineral Names". Mineralogical Magazine 38 (293): 102–5. March 1971. doi:10.1180/minmag.1971.038.293.14. 
  9. ^ Rubin, Alan E. (March 1997). "Mineralogy of meteorite groups". Meteoritics & Planetary Science 32 (2): 231–247. Bibcode:1997M&PS...32..231R. doi:10.1111/j.1945-5100.1997.tb01262.x. 
  10. ^ Ben Bulben. Mhti.com. Retrieved on 2011-05-05.
  11. ^ Duchač, K. C; Hanor, J. S. (September 1987). "Origin and timing of the metasomatic silicification of an early Archaean komatiite sequence, Barberton Mountain Land, South Africa". Precambrian Research 37 (2): 125–146. doi:10.1016/0301-9268(87)90075-1. ISSN 0301-9268. 
  12. ^ Muirshiel Mine
  13. ^ Barite, USGS 2010 Mineral Commodity Summaries
  14. ^ Kastner, Miriam (30 March 1999). "Oceanic minerals: Their origin, nature of their environment, and significance". Proc. Natl. Acad. Sci. U.S.A. 96 (7): 3380–7. Bibcode:1999PNAS...96.3380K. doi:10.1073/pnas.96.7.3380. PMC 34278. PMID 10097047.